General information
| Certifications | |
| CE | Yes |
Motor
| Nominal speed nN [rpm] | 3000 |
| Number of pole pairs | 3 |
| Nominal torque Mn [Nm] | 7。1 |
| Nominal power PN [W] | 2231 |
| Nominal current IN [A] | 4。4 |
| Stall torque M0 [Nm] | 8 |
| Stall current I0 [A] | 4。9 |
| Maximum torque Mmax [Nm] | 33。1 |
| Maximum current Imax [A] | 25。4 |
| Maximum speed nmax [rpm] | 7200 |
| Torque constant KT [Nm/A] | 1。63 |
| Voltage constant KE [V/1000 rpm] | 98。44 |
| Stator resistance R2ph [Ω] | 3。55 |
| Stator inductance L2ph [mH] | 22。5 |
| Electrical time constant tel [ms] | 6。1 |
| Thermal time constant ttherm [min] | 30 |
| Moment of inertia J [kgcm2] | 9。632 |
| Weight without brake m [kg] | 9。2 |
Holding brake
| Holding torque of brake MBr [Nm] | 0 |
| Mass of brake [kg] | 0。46 |
| Moment of inertia of brake JBr [kgcm2] | 0。54 |
Recommendations
| ACOPOS 8Vxxxx.xx... | 1090 |
| ACOPOSmulti 8BVIxxxx... | 0055 |
| Cross section for B&R motor cables [mm2] | 1。5 |
Options
| Connection type | Connector (ytec system) |
| Connection direction | Angled (swivel) |
| Encoder | 2-pole R0 resolver |
| Shaft end | Key |
物料号:
8LSN45.R0030D100-0描述:
Synchronous motor, number of pole pairs: 3 pairs, nominal speed: 3,000 rpm stall torque: 8.000 Nm, without brake, shaft key, angled connector (swivel), centering diameter 110 mm, j6 fit self-cooling, high inertia, IP54 protection, without oil seal 560 VDC, holding torque of brake: 0.00 Nm, 2-pole R0 resolver
| DT升级 | 版本（日期） | 下载 |
|---|---|---|
| V4.0 DT Upgrade (8LSN45.R0030D100-0) | EXE / 301 KB |
| 文档 | 版本（日期） | 下载 |
|---|---|---|
| Datsheet 8LSN4... | PDF / 338 KB |
| 证书 | 版本（日期） | 下载 |
|---|---|---|
| EU Declaration Motors Dreh-Sync | PDF / 302 KB |