General information
Module type | ACOPOSremote module with integrated cold plate |
B&R ID code | 0xE9EB |
Current-carrying capacity of 15-pin TYCO connector | |
Power contacts | Max. 20 A at 40°C |
Support | |
Dynamic node allocation (DNA) | Yes |
Cooling and mounting type |
Wall mounting Water cooling |
Certifications | |
CE | Yes |
UKCA | Yes |
Functional safety | Yes |
UL |
cULus E225616 Power conversion equipment |
DC bus connection
24 VDC power supply
24 VDC output
Quantity | 1 |
Output voltage | Depends on the 24 VDC power supply |
Continuous current | Max. 8 A (max. 4 A per pin) |
Fuse protection | Electronic (per pin) |
Variant | |
24 VDC, COM | M8 connector |
Motor connection
Motor holding brake connection
Fieldbus
Encoder inputs
Enable inputs
Trigger inputs
Temperature sensor connection
Quantity | 1 |
Resistance range | 500 Ω to 5 kΩ |
Support
Software | |
ACP10 | V2.35.1 and higher |
Electrical properties
Discharge capacitance | 0.1 µF |
Operating conditions
Ambient conditions
![](/fileadmin/1484861451401-de-bigicon-1.1.jpg)
Número de material:
8CVI155S1HCS0.01-1Descripción:
ACOPOSremote ACOPOSmulti65 inverter module, 15.5 A, AS, IP65, integrated cold plate, 1x SinCos encoder interface, cold plate mounting
Accesorios opcionales
1.5 mm² motor cables
8CCM0003.11110-0 | ACOPOSremote motor cable, length 3 m, 4x 1.5 mm² + 2x 2x 0.75 mm², 8-pin female speedtec motor connector size 1, 8-pin male speedtec servo connector size 1, can be used in cable drag chains |
8CCM0005.11110-0 | ACOPOSremote motor cable, length 5 m, 4x 1.5 mm² + 2x 2x 0.75 mm², 8-pin female speedtec motor connector size 1, 8-pin male speedtec servo connector size 1, can be used in cable drag chains |
8CCM0010.11110-0 | ACOPOSremote motor cable, length 10 m, 4x 1.5 mm² + 2x 2x 0.75 mm², 8-pin female speedtec motor connector size 1, 8-pin male speedtec servo connector size 1, can be used in cable drag chains |
8CCM0015.11110-0 | ACOPOSremote motor cable, length 15 m, 4x 1.5 mm² + 2x 2x 0.75 mm², 8-pin female speedtec motor connector size 1, 8-pin male speedtec servo connector size 1, can be used in cable drag chains |
8BVE / 8CVI connection cables
8CCH0005.11120-1 | Hybrid cable for connecting 8BVE to 8CVI or 8DI, length 5 m, 2x 2x 0.34 mm² + 4x 0.75 mm² + 5x 2.5 mm², 1x 15-pin female TYCO connector, 1x RJ45 connector, integrated shield fixing, can be used in cable drag chains |
8CCH0007.11120-1 | Hybrid cable for connecting 8BVE to 8CVI or 8DI, length 7 m, 2x 2x 0.34 mm² + 4x 0.75 mm² + 5x 2.5 mm², 1x 15-pin female TYCO connector, 1x RJ45 connector, integrated shield fixing, can be used in cable drag chains |
8CCH0010.11120-1 | Hybrid cable for connecting 8BVE to 8CVI or 8DI, length 10 m, 2x 2x 0.34 mm² + 4x 0.75 mm² + 5x 2.5 mm², 1x 15-pin female TYCO connector, 1x RJ45 connector, integrated shield fixing, can be used in cable drag chains |
Accessory sets
8CXC000.0000-00 | Accessory set: 1x slot cover for hybrid connector |
8CXM000.0000-00 | ACOPOSremote accessory set: 4x hex socket screw M6x80mm for 8CVI inverter modules |
Hybrid cables
8CCH0003.11110-1 | Hybrid cable, length 3 m, 2x 2x 0.34 mm² + 4x 0.75 mm² + 5x 2.5 mm², 2x 15-pin female TYCO connector, can be used in cable drag chains |
8CCH0003.11130-1 | Hybrid cable, length 3 m, 2x 2x 0.34 mm² + 4x 0.75 mm² + 5x 2.5 mm², 2x 15-pin female TYCO connector, 1x connector insert rotated 180°, can be used in cable drag chains |
8CCH0005.11110-1 | Hybrid cable, length 5 m, 2x 2x 0.34 mm² + 4x 0.75 mm² + 5x 2.5 mm², 2x 15-pin female TYCO connector, can be used in cable drag chains |
8CCH0010.11110-1 | Hybrid cable, length 10 m, 2x 2x 0.34 mm² + 4x 0.75 mm² + 5x 2.5 mm², 2x 15-pin female TYCO connector, can be used in cable drag chains |
8CCH0015.11110-1 | Hybrid cable, length 15 m, 2x 2x 0.34 mm² + 4x 0.75 mm² + 5x 2.5 mm², 2x 15-pin female TYCO connector, can be used in cable drag chains |
8CCH0020.11110-1 | Hybrid cable, length 20 m, 2x 2x 0.34 mm² + 4x 0.75 mm² + 5x 2.5 mm², 2x 15-pin female TYCO connector, can be used in cable drag chains |
SinCos cables
8CCS0003.11110-0 | ACOPOSremote EnDat 2.1 cable, length 3 m, 10x 0.14 mm² + 2x 0.5 mm², 12-pin female series 615 signal connector, 15-pin male series 615 signal connector, can be used in cable drag chains |
8CCS0005.11110-0 | ACOPOSremote EnDat 2.1 cable, length 5 m, 10x 0.14 mm² + 2x 0.5 mm², 12-pin female series 615 signal connector, 15-pin male series 615 signal connector, can be used in cable drag chains |
8CCS0010.11110-0 | ACOPOSremote EnDat 2.1 cable, length 10 m, 10x 0.14 mm² + 2x 0.5 mm², 12-pin female series 615 signal connector, 15-pin male series 615 signal connector, can be used in cable drag chains |
8CCS0015.11110-0 | ACOPOSremote EnDat 2.1 cable, length 15 m, 10x 0.14 mm² + 2x 0.5 mm², 12-pin female series 615 signal connector, 15-pin male series 615 signal connector, can be used in cable drag chains |
Actualizaciones de hardware de Automation Studio | Versión (fecha) | Descargar |
---|---|---|
V4.0 HW Upgrade (8CVI155S1HCS0.01-1) | EXE / 371 KB |
Documentación | Versión (fecha) | Descargar |
---|---|---|
Datasheet 8CVI155S1HCS0.01-1 | PDF / 1,002 KB |