Material Number Description Compare products ...
  • Website
  • Model Number
  • Serial number
Login
Logged in as UsernameLogout
Loading...
B&R Logo

Technology Guard

lib.block.product.categories

  • Components and Modules

Material NumberDescriptionCompare products ...
    0TG1000.01
    Technology Guard (MSD)
    Technology Guard (MSD)
    0TG1000.02
    Technology Guard (HID)
    Technology Guard (HID)
    0TGF016.01
    Technology Guard (MSD) with integrated flash drive, 16 GB (MLC)
    Technology Guard (MSD) with integrated flash drive, 16 GB (MLC)
    1TG10X0.1
    TG license for controller redundancy - Changeover times within a few milliseconds - Synchronization with microsecond accuracy - Seamless integration via X20 redundancy link interface - No special controller hardware, standard X20 controller - One-click configuration - Bumpless software download - Non-reactive component exchange during operation B&R controller redundancy ensures the highest availability in machine, process, plant and infrastructure automation. A redundant controller consists of two assemblies (primary/secondary) with identical hardware. If one of the controllers fails, then a bumpless redundancy switchover to the other controller takes places automatically.
    TG license for controller redundancy - Changeover times within a few milliseconds - Synchronization with microsecond accuracy...
    1TG4600.10-5
    Automation Runtime Windows, TG license
    Automation Runtime Windows, TG license
    1TG4600.20
    Automation Runtime Windows Desktop TG license
    Automation Runtime Windows Desktop TG license
    1TG4601.06-5
    Automation Runtime Embedded, TG license
    Automation Runtime Embedded, TG license
    1TG4601.06-T
    Automation Runtime Embedded Terminal TG license
    Automation Runtime Embedded Terminal TG license
    1TG7110.M
    Advanced Controller Tuning TG license - Model-based closed loop control procedure
    Advanced Controller Tuning TG license - Model-based closed loop control procedure
    1TG7111.M
    Advanced Model Identification TG license - Identification of the controlled system
    Advanced Model Identification TG license - Identification of the controlled system
    1TG7120.M
    TG license for advanced signal processing
    TG license for advanced signal processing
    1TG7210.M
    Temperature Control TG license - Heating and cooling processes - Fully automatic control tuning procedure - Automatic multi-zone synchronization - Control with minimal overshooting - Kalman filter - Temperature setpoint generator - Simulation model
    Temperature Control TG license - Heating and cooling processes - Fully automatic control tuning procedure...
    1TG7310.M
    Valve-based hydraulic control TG license - Position and speed control - Alternating pressure/force control - Valve servo correction - Simulation model for a hydraulic drive
    Valve-based hydraulic control TG license - Position and speed control - Alternating pressure/force control...
    1TG7350.M
    Hydraulic Servo Pump Control TG license - Alternating speed/pressure control for the hydraulic pump - Pump protection - Overview of features - Simulation model for a hydraulic drive
    Hydraulic Servo Pump Control TG license - Alternating speed/pressure control for the hydraulic pump - Pump protection...
    1TG7410.M
    Winder Control TG license - Dancer position control - Tension control - Web accumulator control - Diameter estimation - Inertia compensation - Dynamic preset tension - Simulation model
    Winder Control TG license - Dancer position control - Tension control...
    1TG7430.M
    Tension Control TG license - Multi-zone tension control - Individual preset tension for each zone - Automatic control parameter tracking - Acceleration compensation - Simulation model
    Tension Control TG license - Multi-zone tension control - Individual preset tension for each zone...
    1TG7450.1
    TG license for register control (legacy) - Key and sequential color registration - Independent of substrate - Automatic control parameter tracking - Acceleration compensation - Simulation model
    TG license for register control (legacy) - Key and sequential color registration - Independent of substrate...
    1TG8CNC0000.00-01
    ARNC0 license (existing range of functions) - Path control (CNC) for 1 CNC channel with up to 4 axes Configurable syntax interpreter for: - CNC programs based on DIN/ISO 66025 - ST-based robotics programs - Application-specific functions Powerful geometric and dynamic path planning, optimal contour precision Automatic tangential axis Tool compensation Workspace monitoring Path-accurate restart functions Forward/Backward movements on the path Path-synchronous control signals No authorization required to export this version
    ARNC0 license (existing range of functions) - Path control (CNC) for 1 CNC channel with up to 4 axes ...
    1TG8CNC0000.00-02
    ARNC0 license (existing range of functions) - Path control (CNC) for up to 2 CNC channels with up to 4 axes Configurable syntax interpreter for: - CNC programs based on DIN/ISO 66025 - ST-based robotics programs - Application-specific functions Powerful geometric and dynamic path planning, optimal contour precision Automatic tangential axis Tool compensation Workspace monitoring Path-accurate restart functions Forward/Backward movements on the path Path-synchronous control signals Required: 1TG8TRF0000.01-xx No authorization required to export this version
    ARNC0 license (existing range of functions) - Path control (CNC) for up to 2 CNC channels with up to 4 axes ...
    1TG8CNC0000.00-04
    ARNC0 license (existing range of functions) - Path control (CNC) for up to 4 CNC channels with up to 4 axes Configurable syntax interpreter for: - CNC programs based on DIN/ISO 66025 - ST-based robotics programs - Application-specific functions Powerful geometric and dynamic path planning, optimal contour precision Automatic tangential axis Tool compensation Workspace monitoring Path-accurate restart functions Forward/Backward movements on the path Path-synchronous control signals No authorization required to export this version
    ARNC0 license (existing range of functions) - Path control (CNC) for up to 4 CNC channels with up to 4 axes ...
    1TG8CNC0000.00-08
    ARNC0 license (existing range of functions) - Path control (CNC) for up to 8 CNC channels with up to 4 axes Configurable syntax interpreter for: - CNC programs based on DIN/ISO 66025 - ST-based robotics programs - Application-specific functions Powerful geometric and dynamic path planning, optimal contour precision Automatic tangential axis Tool compensation Workspace monitoring Path-accurate restart functions Forward/Backward movements on the path Path-synchronous control signals No authorization required to export this version
    ARNC0 license (existing range of functions) - Path control (CNC) for up to 8 CNC channels with up to 4 axes ...
    1TG8CNC0000.00-09
    ARNC0 license (existing range of functions) - Path control (CNC) for more than 8 CNC channels with up to 4 axes Configurable syntax interpreter for: - CNC programs based on DIN/ISO 66025 - ST-based robotics programs - Application-specific functions Powerful geometric and dynamic path planning, optimal contour precision Automatic tangential axis Tool compensation Workspace monitoring Path-accurate restart functions Forward/Backward movements on the path Path-synchronous control signals No authorization required to export this version
    ARNC0 license (existing range of functions) - Path control (CNC) for more than 8 CNC channels with up to 4 axes ...
    1TG8CNC0000.01-01
    ARNC0 license (existing range of functions) - Path control (CNC) for 1 CNC channel with up to 9 axes Configurable syntax interpreter for: - CNC programs based on DIN/ISO 66025 - ST-based robotics programs - Application-specific functions Powerful geometric and dynamic path planning, optimal contour precision Automatic tangential axis Tool compensation Workspace monitoring Path-accurate restart functions Forward/Backward movements on the path Path-synchronous control signals Authorization required to export this version Council Regulation (EC) 428/2009 (dual use): 2D002 This license is subject to special terms of use and can only be used in combination with library ARNC0ext. ARNC0ext must be obtained from B&R.
    ARNC0 license (existing range of functions) - Path control (CNC) for 1 CNC channel with up to 9 axes ...
    1TG8CNC0000.01-02
    ARNC0 license (existing range of functions) - Path control (CNC) for up to 2 CNC channels with up to 9 axes Configurable syntax interpreter for: - CNC programs based on DIN/ISO 66025 - ST-based robotics programs - Application-specific functions Powerful geometric and dynamic path planning, optimal contour precision Automatic tangential axis Tool compensation Workspace monitoring Path-accurate restart functions Forward/Backward movements on the path Path-synchronous control signals Authorization required to export this version Council Regulation (EC) 428/2009 (dual use): 2D002 This license is subject to special terms of use and can only be used in combination with library ARNC0ext. ARNC0ext must be obtained from B&R.
    ARNC0 license (existing range of functions) - Path control (CNC) for up to 2 CNC channels with up to 9 axes ...
    1TG8CNC0000.01-04
    ARNC0 license (existing range of functions) - Path control (CNC) for up to 4 CNC channels with up to 9 axes Configurable syntax interpreter for: - CNC programs based on DIN/ISO 66025 - ST-based robotics programs - Application-specific functions Powerful geometric and dynamic path planning, optimal contour precision Automatic tangential axis Tool compensation Workspace monitoring Path-accurate restart functions Forward/Backward movements on the path Path-synchronous control signals Authorization required to export this version Council Regulation (EC) 428/2009 (dual use): 2D002 This license is subject to special terms of use and can only be used in combination with library ARNC0ext. ARNC0ext must be obtained from B&R.
    ARNC0 license (existing range of functions) - Path control (CNC) for up to 4 CNC channels with up to 9 axes ...
    1TG8CNC0000.01-08
    ARNC0 license (existing range of functions) - Path control (CNC) for up to 8 CNC channels with up to 9 axes Configurable syntax interpreter for: - CNC programs based on DIN/ISO 66025 - ST-based robotics programs - Application-specific functions Powerful geometric and dynamic path planning, optimal contour precision Automatic tangential axis Tool compensation Workspace monitoring Path-accurate restart functions Forward/Backward movements on the path Path-synchronous control signals Required: 1TG8TRF0000.01-01 Authorization required to export this version Council Regulation (EC) 428/2009 (dual use): 2D002 This license is subject to special terms of use and can only be used in combination with library ARNC0ext. ARNC0ext must be obtained from B&R.
    ARNC0 license (existing range of functions) - Path control (CNC) for up to 8 CNC channels with up to 9 axes ...
    1TG8CNC0000.01-09
    ARNC0 license (existing range of functions) - Path control (CNC) for more than 8 CNC channels with up to 9 axes Configurable syntax interpreter for: - CNC programs based on DIN/ISO 66025 - ST-based robotics programs - Application-specific functions Powerful geometric and dynamic path planning, optimal contour precision Automatic tangential axis Tool compensation Workspace monitoring Path-accurate restart functions Forward/Backward movements on the path Path-synchronous control signals Authorization required to export this version Council Regulation (EC) 428/2009 (dual use): 2D002 This license is subject to special terms of use and can only be used in combination with library ARNC0ext. ARNC0ext must be obtained from B&R.
    ARNC0 license (existing range of functions) - Path control (CNC) for more than 8 CNC channels with up to 9 axes ...
    1TG8CNCAX00.01-01
    ARNC0 license (existing range of functions) - Path control (CNC) for 1 CNC channel with more than 9 axes Configurable syntax interpreter for: - CNC programs based on DIN/ISO 66025 - ST-based robotics programs - Application-specific functions Powerful geometric and dynamic path planning, optimal contour precision Automatic tangential axis Tool compensation Workspace monitoring Path-accurate restart functions Forward/Backward movements on the path Path-synchronous control signals Authorization required to export this version Council Regulation (EC) 428/2009 (dual use): 2D002 This license is subject to special terms of use and can only be used in combination with library ARNC0ext. ARNC0ext must be obtained from B&R.
    ARNC0 license (existing range of functions) - Path control (CNC) for 1 CNC channel with more than 9 axes ...
    1TG8CNCAX00.01-02
    ARNC0 license (existing range of functions) - Path control (CNC) for up to 2 CNC channels with more than 9 axes Configurable syntax interpreter for: - CNC programs based on DIN/ISO 66025 - ST-based robotics programs - Application-specific functions Powerful geometric and dynamic path planning, optimal contour precision Automatic tangential axis Tool compensation Workspace monitoring Path-accurate restart functions Forward/Backward movements on the path Path-synchronous control signals Authorization required to export this version Council Regulation (EC) 428/2009 (dual use): 2D002 This license is subject to special terms of use and can only be used in combination with library ARNC0ext. ARNC0ext must be obtained from B&R.
    ARNC0 license (existing range of functions) - Path control (CNC) for up to 2 CNC channels with more than 9 axes ...
    1TG8CNCAX00.01-04
    ARNC0 license (existing range of functions) - Path control (CNC) for up to 4 CNC channels with more than 9 axes Configurable syntax interpreter for: - CNC programs based on DIN/ISO 66025 - ST-based robotics programs - Application-specific functions Powerful geometric and dynamic path planning, optimal contour precision Automatic tangential axis Tool compensation Workspace monitoring Path-accurate restart functions Forward/Backward movements on the path Path-synchronous control signals Authorization required to export this version Council Regulation (EC) 428/2009 (dual use): 2D002 This license is subject to special terms of use and can only be used in combination with library ARNC0ext. ARNC0ext must be obtained from B&R.
    ARNC0 license (existing range of functions) - Path control (CNC) for up to 4 CNC channels with more than 9 axes ...
    1TG8CNCAX00.01-08
    ARNC0 license (existing range of functions) - Path control (CNC) for up to 8 CNC channels with more than 9 axes Configurable syntax interpreter for: - CNC programs based on DIN/ISO 66025 - ST-based robotics programs - Application-specific functions Powerful geometric and dynamic path planning, optimal contour precision Automatic tangential axis Tool compensation Workspace monitoring Path-accurate restart functions Forward/Backward movements on the path Path-synchronous control signals Authorization required to export this version Council Regulation (EC) 428/2009 (dual use): 2D002 This license is subject to special terms of use and can only be used in combination with library ARNC0ext. ARNC0ext must be obtained from B&R.
    ARNC0 license (existing range of functions) - Path control (CNC) for up to 8 CNC channels with more than 9 axes ...
    1TG8CNCAX00.01-09
    ARNC0 license (existing range of functions) - Path control (CNC) for more than 8 CNC channels with more than 9 axes Total number of CNC channels and kinematic structures used: Max. 8 Configurable syntax interpreter for: - CNC programs based on DIN/ISO 66025 - ST-based robotics programs - Application-specific functions Powerful geometric and dynamic path planning, optimal contour precision Automatic tangential axis Tool compensation Workspace monitoring Path-accurate restart functions Forward/Backward movements on the path Path-synchronous control signals Authorization required to export this version Council Regulation (EC) 428/2009 (dual use): 2D002 This license is subject to special terms of use and can only be used in combination with library ARNC0ext. ARNC0ext must be obtained from B&R.
    ARNC0 license (existing range of functions) - Path control (CNC) for more than 8 CNC channels with more than 9 axes ...
    1TG8COL0000.01-01
    3D collision detection - 1 external kinematic structure
    3D collision detection - 1 external kinematic structure
    1TG8COL0000.01-02
    3D collision detection - 2 external kinematic structures
    3D collision detection - 2 external kinematic structures
    1TG8COL0000.01-04
    3D collision detection - 4 external kinematic structures
    3D collision detection - 4 external kinematic structures
    1TG8COL0000.01-08
    3D collision detection - 8 external kinematic structures
    3D collision detection - 8 external kinematic structures
    1TG8COL0000.01-09
    3D collision detection - External kinematic structures
    3D collision detection - External kinematic structures
    1TG8SDC0000.01-01
    SDC software ClosedLoop license for 1 independent positioning axis Application for devices with: - Speed interface (AO) - Absolute position interface and enabled position controller Application examples: - Stepper motor and motor modules - Frequency inverters - Servo drive from other vendors
    SDC software ClosedLoop license for 1 independent positioning axis Application for devices with...
    1TG8SDC0000.01-02
    SDC software ClosedLoop license for up to 2 independent positioning axes Application for devices with: - Speed interface (AO) - Absolute position interface and enabled position controller Application examples: - Stepper motor and motor modules - Frequency inverters - Servo drive from other vendors
    SDC software ClosedLoop license for up to 2 independent positioning axes Application for devices with...
    1TG8SDC0000.01-04
    SDC software ClosedLoop license for up to 4 independent positioning axes Application for devices with: - Speed interface (AO) - Absolute position interface and enabled position controller Application examples: - Stepper motor and motor modules - Frequency inverters - Servo drive from other vendors
    SDC software ClosedLoop license for up to 4 independent positioning axes Application for devices with...
    1TG8SDC0000.01-08
    SDC software ClosedLoop license for up to 8 independent positioning axes Application for devices with: - Speed interface (AO) - Absolute position interface and enabled position controller Application examples: - Stepper motor and motor modules - Frequency inverters - Servo drive from other vendors
    SDC software ClosedLoop license for up to 8 independent positioning axes Application for devices with...
    1TG8SDC0000.01-09
    SDC software ClosedLoop license for more than 8 independent positioning axes Application for devices with: - Speed interface (AO) - Absolute position interface and enabled position controller Application examples: - Stepper motor and motor modules - Frequency inverters - Servo drive from other vendors
    SDC software ClosedLoop license for more than 8 independent positioning axes Application for devices with...
    1TG8SDC0000.02-01
    SDC software Advanced license for 1 independent positioning axis Functions: - Electronic gears - Cams - Cam Profile Automat - ACOPOS reACTION Technology
    SDC software Advanced license for 1 independent positioning axis Functions:...
    1TG8SDC0000.02-02
    SDC software Advanced license for up to 2 independent positioning axes Functions: - Electronic gears - Cams - Cam Profile Automat - ACOPOS reACTION Technology
    SDC software Advanced license for up to 2 independent positioning axes Functions:...
    1TG8SDC0000.02-04
    SDC software Advanced license for up to 4 independent positioning axes Functions: - Electronic gears - Cams - Cam Profile Automat - ACOPOS reACTION Technology
    SDC software Advanced license for up to 4 independent positioning axes Functions:...
    1TG8SDC0000.02-08
    SDC software Advanced license for up to 8 independent positioning axes Functions: - Electronic gears - Cams - Cam Profile Automat - ACOPOS reACTION Technology
    SDC software Advanced license for up to 8 independent positioning axes Functions:...
    1TG8SDC0000.02-09
    SDC software Advanced license for more than 8 independent positioning axes Functions: - Electronic gears - Cams - Cam Profile Automat - ACOPOS reACTION Technology
    SDC software Advanced license for more than 8 independent positioning axes Functions:...
    1TG8SDC0000.03-01
    SDC software Premium license for 1 independent positioning axis Function: - Cycle time less than 800 µs
    SDC software Premium license for 1 independent positioning axis Function:...
    1TG8SDC0000.03-02
    SDC software Premium license for up to 2 independent positioning axes Function: - Cycle time less than 800 µs
    SDC software Premium license for up to 2 independent positioning axes Function:...
    1TG8SDC0000.03-04
    SDC software Premium license for up to 4 independent positioning axes Function: - Cycle time less than 800 µs
    SDC software Premium license for up to 4 independent positioning axes Function:...
    1TG8SDC0000.03-08
    SDC software Premium license for up to 8 independent positioning axes Function: - Cycle time less than 800 µs
    SDC software Premium license for up to 8 independent positioning axes Function:...
    1TG8SDC0000.03-09
    SDC software Premium license for more than 8 independent positioning axes Function: - Cycle time less than 800 µs
    SDC software Premium license for more than 8 independent positioning axes Function:...
    1TG8TRF0000.01-01
    3D transformation functions License for 1 kinematic structure with up to 4 joint axes - SCARA - Double SCARA - 2D rod kinematics - Tripod Interface support for user-specific transformations with up to 4 or more joint axes Required: - CNC/Robotics 1TG8CNC0000.00-xx (up to 4 joint axes) - CNC/Robotics 1TG8CNC0000.01-xx (up to 9 joint axes) - CNC/Robotics 1TG8CNCAX00.00-xx (more than 9 joint axes) No authorization required to export this version
    3D transformation functions License for up to 1 kinematic structures with up to 4 joint axes ...
    1TG8TRF0000.01-02
    3D transformation functions License for up to 2 kinematic structures with up to 4 joint axes - SCARA - Double SCARA - 2D rod kinematics - Tripod Interface support for user-specific transformations with up to 4 or more joint axes Required: - CNC/Robotics 1TG8CNC0000.00-xx (up to 4 joint axes) - CNC/Robotics 1TG8CNC0000.01-xx (up to 9 joint axes) - CNC/Robotics 1TG8CNCAX00.00-xx (more than 9 joint axes) No authorization required to export this version
    3D transformation functions License for up to 2 kinematic structures with up to 4 joint axes ...
    1TG8TRF0000.01-04
    3D transformation functions License for up to 4 kinematic structures with up to 4 joint axes - SCARA - Double SCARA - 2D rod kinematics - Tripod Interface support for user-specific transformations with up to 4 or more joint axes Required: - CNC/Robotics 1TG8CNC0000.00-xx (up to 4 joint axes) - CNC/Robotics 1TG8CNCAX00.00-xx (more than 4 joint axes) No authorization required to export this version
    3D transformation functions License for up to 4 kinematic structures with up to 4 joint axes ...
    1TG8TRF0000.01-08
    3D transformation functions License for up to 8 kinematic structures with up to 4 joint axes - SCARA - Double SCARA - 2D rod kinematics - Tripod Interface support for user-specific transformations with up to 4 or more joint axes Required: - CNC/Robotics 1TG8CNC0000.00-xx (up to 4 joint axes) - CNC/Robotics 1TG8CNC0000.01-xx (up to 9 joint axes) - CNC/Robotics 1TG8CNCAX00.00-xx (more than 9 joint axes) No authorization required to export this version
    3D transformation functions License for up to 8 kinematic structures with up to 4 joint axes ...
    1TG8TRF0000.01-09
    3D transformation function License for up to 9 or more kinematic structures with up to 4 joint axes - SCARA - Double SCARA - 2D rod kinematics - Tripod Interface support for user-specific transformations with up to 4 or more joint axes Required: - CNC/Robotics 1TG8CNC0000.00-xx (up to 4 joint axes) - CNC/Robotics 1TG8CNCAX00.00-xx (more than 4 joint axes) No authorization required to export this version
    3D transformation functions License for up to 9 or more kinematic structures with up to 4 joint axes ...
    1TG8TRF0000.02-01
    3D transformation functions License for 1 kinematic structure with more than 4 joint axes - 6-axis articulated arm - 5-axis CNC - Galileo Interface support for user-specific transformations Required: CNC/Robotics 1TG8CNCAX00.01-xx Authorization required to export this version Council Regulation (EC) 428/2009 (dual use): 2D002 This license is subject to special terms of use and can only be used in combination with library ARNC0ext. ARNC0ext must be obtained from B&R.
    3D transformation functions License for up to 1 kinematic structures with more than 4 joint axes ...
    1TG8TRF0000.02-02
    3D transformation functions License for up to 2 kinematic structures with more than 4 joint axes - 6-axis articulated arm - 5-axis CNC - Galileo Interface support for user-specific transformations Required: CNC/Robotics 1TG8CNCAX00.01-xx Authorization required to export this version Council Regulation (EC) 428/2009 (dual use): 2D002 This license is subject to special terms of use and can only be used in combination with library ARNC0ext. ARNC0ext must be obtained from B&R.
    3D transformation functions License for up to 2 kinematic structures with more than 4 joint axes ...
    1TG8TRF0000.02-04
    3D transformation functions License for up to 4 kinematic structures with more than 4 joint axes - 6-axis articulated arm - 5-axis CNC - Galileo Interface support for user-specific transformations Required: CNC/Robotics 1TG8CNCAX00.01-xx Authorization required to export this version Council Regulation (EC) 428/2009 (dual use): 2D002 This license is subject to special terms of use and can only be used in combination with library ARNC0ext. ARNC0ext must be obtained from B&R.
    3D transformation functions License for up to 4 kinematic structures with more than 4 joint axes ...
    1TG8TRF0000.02-08
    3D transformation functions License for up to 8 kinematic structures with more than 4 joint axes - 6-axis articulated arm - 5-axis CNC - Galileo Interface support for user-specific transformations Required: CNC/Robotics 1TG8CNCAX00.01-xx Authorization required to export this version Council Regulation (EC) 428/2009 (dual use): 2D002 This license is subject to special terms of use and can only be used in combination with library ARNC0ext. ARNC0ext must be obtained from B&R.
    3D transformation functions License for up to 8 kinematic structures with more than 4 joint axes ...
    1TG8TRF0000.02-09
    3D transformation functions License for more than 8 kinematic structures with more than 4 joint axes - 6-axis articulated arm - 5-axis CNC - Galileo Interface support for user-specific transformations Required: CNC/Robotics 1TG8CNCAX00.01-xx Authorization required to export this version Council Regulation (EC) 428/2009 (dual use): 2D002 This license is subject to special terms of use and can only be used in combination with library ARNC0ext. ARNC0ext must be obtained from B&R.
    3D transformation functions License for more than 8 kinematic structures with more than 4 joint axes ...
    1TGACP0000.00-01
    License for 1 ACOPOS P3 technology function per axis Examples for technology functions: - Virtual axis - Closed-loop control of elastic systems - Pitch error and backlash compensation - Repetitive control - ISQ ripple identification - ACOPOS reACTION - SafeMOTION with motors from 3rd-party vendors - ...
    License for 1 ACOPOS P3 technology function per axis Technology function examples:...
    1TGACP0000.00-99
    General license for all ACOPOS P3 technology functions and networked SafeMOTION packages per axis
    General license for all ACOPOS P3 technology functions and networked SafeMOTION packages per axis
    1TGACPSMC0.00-01
    License for 1 networked SafeMOTION package per axis Networked SafeMOTION package examples: - Velocity (safety functions SOS, SS2, SLS, SMS, SLA) - Position (safety functions Safe Homing, SLP, SMP, RSP) - Torque (safety functions SBT, SLT ) - Etc.
    License for 1 networked SafeMOTION package per axis Networked SafeMOTION package examples:...
    1TG-AP.SR-LIB-BAS
    APROL Basic Library/CTRL The license enables the use of basic APROL functions on a B&R controller(SG4 target). To use the license, a dongle (0TG1000.01-Technology Guard) is required.
    APROL Basic Library/CTRL The license enables the use of basic APROL...
    1TG-AP.SR-LIB-PAL
    APROL Process Automation Lib(PAL)/CTRL The license enables the use of basic APROL functions on a B&R controller(SG4 target). To use the license, a dongle (0TG1000.01-Technology Guard) is required.
    APROL Process Automation Lib(PAL)/CTRL The license enables the use of basic APROL...
    1TGMPASSET.20-01
    mapp Asset Intensity calculates the effectiveness of a machine based on its production data. The calculated data is then prepared for display in the form of a list or graph or made available for export.
    mapp Asset Intensity calculates the effectiveness of a machine based on its production data. The calculated data is then prepared for display in the form of a list or graph or made available for export.
    1TGMPAUDIT.02
    B&R software license - MpAudit - Single license - Records various events (user management, alarm management, OPC UA, etc.) - Archival and export in various formats (encrypted .zip archive, readable PDF, etc.) - Support for modular software concepts - Web-based diagnostics and XML configuration The use of mapp flat-rate 1TGMPFLAT.02 is possible as an alternative.
    B&R software license - MpAudit - Single license - Records various events (user management, alarm management, OPC UA, etc.)...
    1TGMPAUDIT.10-01
    mapp Audit collects and manages a wide range of different events. These include when user-defined events occur, when machine operators log in/out or when an alarm occurs. All events are collected and can be exported with password protection to protect them from tampering.
    mapp Audit collects and manages a wide range of different events. These include when user-defined events occur, when machine operators log in/out or when an alarm occurs. All events are collected and can be exported with password protection to protect them from tampering.
    1TGMPAXFLAT.10-01
    Contains all licenses for mapp Axis advanced ACOPOS P3 features. License only required for ACOPOS P3.
    Contains all licenses for mapp Axis advanced ACOPOS P3 features. License only required for ACOPOS P3.
    1TGMPAXIS.00-01
    The mapp Axis "Basic" license allows the use of mapp Axis on the target system. It is required if axis functionality is used. Only one license is required per target system.
    The mapp Axis "Basic" license allows the use of mapp Axis on the target system. It is required if axis functionality is used. Only one license is required per target system.
    1TGMPBCKLSH.10-01
    More precise positioning of spindle drives with and without backlash. License required for ACOPOS P3.
    More precise positioning of spindle drives with and without backlash. License required for ACOPOS P3.
    1TGMPBRCLNT.10-01
    License for one additional client on B&R hardware.
    License for one additional client on B&R hardware.
    1TGMPCLIENT.10-01
    License for one additional client.
    License for one additional client.
    1TGMPCNC.00-01
    This license allows the use of Cartesian mechanical systems. The maximum number of path-controlled axes is 4. One license is required per axis group. Included is the functionality of mapp Axis basic license 1TGMPAXIS.00-01.
    This license allows the use of Cartesian mechanical systems. The maximum number of path-controlled axes is 4. One license is required per axis group. Included is the functionality of mapp Axis basic license 1TGMPAXIS.00-01.
    1TGMPCNC.02
    B&R software license - MpCnc - Single license - CNC functional interface for Cartesian systems - Starting programs, moving/jogging blocks, etc. - Web-based diagnostics and XML configuration The use of mapp flat-rate 1TGMPFLAT.02 is possible as an alternative. The license for the CNC channel must be ordered separately.
    B&R software license - MpCnc - Single license - CNC functional interface for Cartesian systems...
    1TGMPCNC4.00-01
    This license allows the use of a mechanical system with up to 4 axes. The maximum number of path-controlled axes is 4. One license is required per axis group. Included is the functionality of mapp Axis basic license 1TGMPAXIS.00-01.
    This license allows the use of a mechanical system with up to 4 axes. The maximum number of path-controlled axes is 4. One license is required per axis group. Included is the functionality of mapp Axis basic license 1TGMPAXIS.00-01.
    1TGMPCNC4X.00-01
    This license allows the use of a mechanical system with up to 4 axes. There is no restriction on the number of path-controlled axes. One license is required per axis group; it is subject to the dual-use export restrictions per Regulation (EC) No. 428/2009 of the European Community. Also included is the functionality of mapp Axis basic license 1TGMPAXIS.00-01.
    This license allows the use of a mechanical system with up to 4 axes. There is no restriction on the number of path-controlled axes. One license is required per axis group; it is subject to the dual-use export restrictions per Regulation (EC) No. 428/2009 of the European Community. Also included is the functionality of mapp Axis basic license 1TGMPAXIS.00-01.
    1TGMPCNC5X.00-01
    This license allows the use of a mechanical system with up to 5 axes. There is no restriction on the number of path-controlled axes. One license is required per axis group; it is subject to the dual-use export restrictions per Regulation (EC) No. 428/2009 of the European Community. Also included is the functionality of mapp Axis basic license 1TGMPAXIS.00-01.
    This license allows the use of a mechanical system with up to 5 axes. There is no restriction on the number of path-controlled axes. One license is required per axis group; it is subject to the dual-use export restrictions per Regulation (EC) No. 428/2009 of the European Community. Also included is the functionality of mapp Axis basic license 1TGMPAXIS.00-01.
    1TGMPCNC6X.00-01
    This license allows the use of a mechanical system with up to 6 axes. There is no restriction on the number of path-controlled axes. One license is required per axis group; it is subject to the dual-use export restrictions per Regulation (EC) No. 428/2009 of the European Community. Also included is the functionality of mapp Axis basic license 1TGMPAXIS.00-01.
    This license allows the use of a mechanical system with up to 6 axes. There is no restriction on the number of path-controlled axes. One license is required per axis group; it is subject to the dual-use export restrictions per Regulation (EC) No. 428/2009 of the European Community. Also included is the functionality of mapp Axis basic license 1TGMPAXIS.00-01.
    1TGMPCNCCDC.10-01
    This license allows the use of tool radius compensation. One license is required for each axis group.
    This license allows the use of tool radius compensation. One license is required for each axis group.
    1TGMPCNCCOMP.10-01
    This license allows the use of compressor technology. One license is required for each axis group.
    This license allows the use of compressor technology. One license is required for each axis group.
    1TGMPCNCFLAT.00-01
    This license allows the use of any number of axis groups (of all types) on a target system. An unlimited number of path-controlled axes per axis group is possible. Only one license is required per target system; it is subject to the dual-use export restrictions per Regulation (EC) No. 428/2009 of the European Community. Also included is the functionality of mapp Axis basic license 1TGMPAXIS.00-01.
    This license allows the use of any number of axis groups (of all types) on a target system. An unlimited number of path-controlled axes per axis group is possible. Only one license is required per target system; it is subject to the dual-use export restrictions per Regulation (EC) No. 428/2009 of the European Community. Also included is the functionality of mapp Axis basic license 1TGMPAXIS.00-01.
    1TGMPCNCGEOC.10-01
    This license allows the use of geometric compensation. One license is required for each axis group.
    This license allows the use of geometric compensation. One license is required for each axis group.
    1TGMPCNCJERK.10-01
    This license allows the use of a jerk-limited path planner. One license is required for each axis group.
    This license allows the use of a jerk-limited path planner. One license is required for each axis group.
    1TGMPCNCPMF.10-01
    This license allows the use of programmed moving frames. One license is necessary for each axis group.
    This license allows the use of programmed moving frames. One license is necessary for each axis group.
    1TGMPCNCWSM.10-01
    This license allows the use of workspace monitoring. One license is required for each axis group.
    This license allows the use of workspace monitoring. One license is required for each axis group.
    1TGMPCNCX.00-01
    This license allows the use of Cartesian mechanical systems. There is no restriction on the number of path-controlled axes. One license is required per axis group; it is subject to the dual-use export restrictions per Regulation (EC) No. 428/2009 of the European Community. Also included is the functionality of mapp Axis basic license 1TGMPAXIS.00-01.
    This license allows the use of Cartesian mechanical systems. There is no restriction on the number of path-controlled axes. One license is required per axis group; it is subject to the dual-use export restrictions per Regulation (EC) No. 428/2009 of the European Community. Also included is the functionality of mapp Axis basic license 1TGMPAXIS.00-01.
    1TGMPCODEBOX.10-01
    B&R software license - MpCodeBox - Single license - Requires mapp Services base license 1TGMPSRV.00-01 - Extend the application on the machine at runtime - Program in Structured Text or Ladder Diagram - Support for modular software concepts - Web-based diagnostics and XML configuration
    B&R software license - MpCodeBox - Single license - Requires mapp Services base license 1TGMPSRV.00-01...
    1TGMPCONTROL.00-01
    This license includes advanced functions in closed-loop control and signal processing. This includes areas such as autotuning, system identification, statistical data evaluation and profile generation.
    This license includes advanced functions in closed-loop control and signal processing. This includes areas such as autotuning, system identification, statistical data evaluation and profile generation.
    1TGMPDATA.02
    B&R software license - MpData - Single license - Traces variable values during runtime - Records on value change, trigger or time interval - Dynamic variable mapping at runtime - Data archival in CSV file(s) - Support for modular software concepts - Web-based diagnostics and XML configuration The use of mapp flat-rate 1TGMPFLAT.02 is possible as an alternative.
    B&R software license - MpData - Single license - Traces variable values during runtime...
    1TGMPDATA.10-01
    mapp Data makes it possible log process data. The user defines the process data and the time frame in which it should be collected. In addition, data can be displayed in table form or evaluated statistically.
    mapp Data makes it possible log process data. The user defines the process data and the time frame in which it should be collected. In addition, data can be...
    1TGMPDELTA.00-01
    This license allows the use of a delta mechanical system. The maximum number of path-controlled axes is 4. One license is required per axis group. Included is the functionality of mapp Axis basic license 1TGMPAXIS.00-01.
    This license allows the use of a delta mechanical system. The maximum number of path-controlled axes is 4. One license is required per axis group. Included is the functionality of mapp Axis basic license 1TGMPAXIS.00-01.
    1TGMPDELTA.02
    B&R software license - MpDelta - Single license - Delta robot interface - Starting programs, jogging, etc. - Various coordinate systems - Support for modular software concepts - Web-based diagnostics and XML configuration The use of mapp flat-rate 1TGMPFLAT.02 is possible as an alternative. The license for the CNC channel and transformation must be ordered separately.
    B&R software license - MpDelta - Single license - Delta robot interface...
    1TGMPDELTAX.00-01
    This license allows the use of a delta mechanical system. There is no restriction on the number of path-controlled axes. One license is required per axis group; it is subject to the dual-use export restrictions per Regulation (EC) No. 428/2009 of the European Community. Also included is the functionality of mapp Axis basic license 1TGMPAXIS.00-01.
    This license allows the use of a delta mechanical system. There is no restriction on the number of path-controlled axes. One license is required per axis group; it is subject to the dual-use export restrictions per Regulation (EC) No. 428/2009 of the European Community. Also included is the functionality of mapp Axis basic license 1TGMPAXIS.00-01.
    1TGMPDS402.20-01
    The mapp Axis "DS402-compliant drive" license allows the use of DS402-compatible drives via POWERLINK. One license is required for each axis.
    The mapp Axis "DS402-compliant drive" license allows the use of DS402-compatible drives via POWERLINK. One license is required for each axis.
    1TGMPELS.10-01
    More precise closed-loop control of flexible drive systems with model-based control and integrated virtual sensors. License required for ACOPOS P3.
    More precise closed-loop control of flexible drive systems with model-based control and integrated virtual sensors. License required for ACOPOS P3.
    1TGMPENERGY.10-01
    mapp Energy collects energy data from various modules in the machine and prepares the data so that energy consumption can be visualized. In addition, data is collected and made available as a file for analysis.
    mapp Energy collects energy data from various modules in the machine and prepares the data so that energy consumption can be visualized. In addition, data is collected and made available as a file for analysis.
    1TGMPFLAT.02
    - mapp technology flatrate included "1TGMPYYYY.02" single licenses per PLC - Future "1TGMPYYYY.02" single licenses are also covered
    - mapp technology flatrate included "1TGMPYYYY.02" single licenses per PLC - Future "1TGMPYYYY.02" single licenses are also covered
    1TGMPISQRIP.10-01
    Compensation for motor-specific disturbances. License required for ACOPOS P3.
    Compensation for motor-specific disturbances. License required for ACOPOS P3.
    1TGMPOEE.02
    B&R software license - MpOee - Single license - Records overall equipment effectiveness (KPI) for measuring productivity - Display of measured values as list, timeline or graph - Export of measured values in CSV format - Support for modular software concepts - Web-based diagnostics and XML configuration The use of mapp flat-rate 1TGMPFLAT.02 is possible as an alternative.
    B&R software license - MpOee - Single license - Records overall equipment effectiveness (KPI) for measuring...
    1TGMPOEE.10-01
    mapp OEE calculates overall equipment effectiveness based on the performance, availability and quality of the machine. The calculated data is then prepared for display in the form of a list or graph or made available for export.
    mapp OEE calculates overall equipment effectiveness based on the performance, availability and quality of the machine. The calculated data is then prepared for display in the form of a list or graph or made available for export.
    1TGMPPACKML.02
    B&R software license - MpPackML - Single license - OMAC PackML state model - Configuration of states for each operating mode - Support for several operating modes - Support for modular software concepts - Web-based diagnostics and XML configuration The use of mapp flat-rate 1TGMPFLAT.02 is possible as an alternative.
    B&R software license - MpPackML - Single license - OMAC PackML state model...
    1TGMPPACKML.10-01
    mapp PackML provides support when implementing the OMAC PackML standard. Special focus is placed on the state model as well as managing the various operating modes. In addition, the current machine state can be shared with other machines/stations in the network using PackTags.
    mapp PackML provides support when implementing the OMAC PackML standard. Special focus is placed on the state model as well as managing the various operating modes. In addition, the current machine state can be shared with other machines/stations in the network using PackTags.
    1TGMPPAPER.20-01
    Widget "Paper" is based on SVG technology and makes it possible to implement animations, transitions and transformations in a mapp View HMI application to show the machine process in motion.
    Widget "Paper" is based on SVG technology and makes it possible to implement animations, transitions and transformations in a mapp View HMI application to show the machine process in motion.
    1TGMPPLAST.00-01
    Base license for mapp Plastics This license is required to use the advanced functions in the mapp Control Technology Package that are related to machines in the plastics industry. The license includes mapp Clamp (operation of a clamp), mapp Inject (operation of injection and plasticizing equipment), mapp Ejector (operation of an ejector), mapp InjUnit (operation of an injection unit) and other basic functions for these types of machines.
    Base license for mapp Plastics This license is required to use the advanced functions in the mapp Control Technology Package that are related to machines in the plastics industry. The license includes mapp Clamp (operation of a...
    1TGMPREACT.10-01
    User-specific functions directly on the drive with low cycle time. License required for ACOPOS P3.
    User-specific functions directly on the drive with low cycle time. License required for ACOPOS P3.
    1TGMPREPCTRL.10-01
    Automatic compensation of lag error caused by periodic disturbances. License required for ACOPOS P3.
    Automatic compensation of lag error caused by periodic disturbances. License required for ACOPOS P3.
    1TGMPREPORT.20-01
    mapp Report makes it possible to generate PDF reports directly at the machine. A wide range of data can be included in the report, such as diagnostic data or current production values. These reports can then be localized and exported in a user-specified design.
    mapp Report makes it possible to generate PDF reports directly at the machine. A wide range of data can be included in the report, such as diagnostic data or current production values. These reports can then be localized and exported in a user-specified design.
    1TGMPROBCDC.10-01
    This license allows the use of cutter diameter compensation. One license is necessary for each axis group.
    This license allows the use of cutter diameter compensation. One license is necessary for each axis group.
    1TGMPROBFF.10-01
    This license allows the use of feed-forward control based on a dynamic model. One license is necessary for each axis group.
    This license allows the use of feed-forward control based on a dynamic model. One license is necessary for each axis group.
    1TGMPROBFLAT.00-01
    This license allows the use of any number of axis groups (of all types) on a target system. An unlimited number of path-controlled axes per axis group is possible. Only one license is required per target system; it is subject to the dual-use export restrictions per Regulation (EC) No. 428/2009 of the European Community. Also included is the functionality of mapp Axis basic license 1TGMPAXIS.00-01.
    This license allows the use of any number of axis groups (of all types) on a target system. An unlimited number of path-controlled axes per axis group is possible. Only one license is required per target system; it is subject to the dual-use export restrictions per Regulation (EC) No. 428/2009 of the European Community. Also included is the functionality of mapp Axis basic license 1TGMPAXIS.00-01.
    1TGMPROBO4.00-01
    This license allows the use of a 4-axis robotic arm mechanical system. The maximum number of path-controlled axes is 4. One license is required per axis group. Included is the functionality of mapp Axis basic license 1TGMPAXIS.00-01.
    This license allows the use of a 4-axis robotic arm mechanical system. The maximum number of path-controlled axes is 4. One license is required per axis group. Included is the functionality of mapp Axis basic license 1TGMPAXIS.00-01.
    1TGMPROBO4X.00-01
    This license allows the use of a 4-axis robotic arm mechanical system. There is no restriction on the number of path-controlled axes. One license is required per axis group; it is subject to the dual-use export restrictions per Regulation (EC) No. 428/2009 of the European Community. Also included is the functionality of mapp Axis basic license 1TGMPAXIS.00-01.
    This license allows the use of a 4-axis robotic arm mechanical system. There is no restriction on the number of path-controlled axes. One license is required per axis group; it is subject to the dual-use export restrictions per Regulation (EC) No. 428/2009 of the European Community. Also included is the functionality of mapp Axis basic license 1TGMPAXIS.00-01.
    1TGMPROBO5X.00-01
    This license allows the use of a 5-axis robotic arm mechanical system. There is no restriction on the number of path-controlled axes. One license is required per axis group; it is subject to the dual-use export restrictions per Regulation (EC) No. 428/2009 of the European Community. Also included is the functionality of mapp Axis basic license 1TGMPAXIS.00-01.
    This license allows the use of a 5-axis robotic arm mechanical system. There is no restriction on the number of path-controlled axes. One license is required per axis group; it is subject to the dual-use export restrictions per Regulation (EC) No. 428/2009 of the European Community. Also included is the functionality of mapp Axis basic license 1TGMPAXIS.00-01.
    1TGMPROBO6X.00-01
    This license allows the use of a 6-axis robotic arm mechanical system. There is no restriction on the number of path-controlled axes. One license is required per axis group; it is subject to the dual-use export restrictions per Regulation (EC) No. 428/2009 of the European Community. Also included is the functionality of mapp Axis basic license 1TGMPAXIS.00-01.
    This license allows the use of a 6-axis robotic arm mechanical system. There is no restriction on the number of path-controlled axes. One license is required per axis group; it is subject to the dual-use export restrictions per Regulation (EC) No. 428/2009 of the European Community. Also included is the functionality of mapp Axis basic license 1TGMPAXIS.00-01.
    1TGMPROBOARM.02
    B&R software license - MpRoboArm - Single license - Interface for serial robot kinematics (anthropomorphic) - Starting programs, jogging, etc. - Various coordinate systems - Support for modular software concepts - Web-based diagnostics and XML configuration The use of mapp flat-rate 1TGMPFLAT.02 is possible as an alternative. The license for the CNC channel and transformation must be ordered separately.
    B&R software license - MpRoboArm - Single license - Interface for serial robot kinematics (anthropomorphic)...
    1TGMPROBOX.02
    B&R software license - MpRoboX - Single license - Flexible use of various robot kinematics - Starting programs, jogging, etc. - Various coordinate systems - Support for modular software concepts - Web-based diagnostics and XML configuration The use of mapp flat-rate 1TGMPFLAT.02 is possible as an alternative. The license for the CNC channel and transformation must be ordered separately.
    B&R software license - MpRoboX - Single license - Flexible use of various robot kinematics...
    1TGMPROBPMF.10-01
    This license allows the use of programmed moving frames. One license is necessary for each axis group.
    This license allows the use of programmed moving frames. One license is necessary for each axis group.
    1TGMPSAFETYX.00-01
    B&R software license MpSafetyX - Single license - For interacting with B&R safety components - Provides secure data exchange between HMI elements and the SafeLOGIC controller - Transfer of safe parameters from an HMI application to the safe application - Support for modular software concepts - Web-based diagnostics and XML configuration
    B&R software license MpSafetyX - Single license - For interacting with B&R safety components...
    1TGMPSCARA.00-01
    This license allows the use of a SCARA mechanical system. The maximum number of path-controlled axes is 4. One license is required per axis group. Included is the functionality of mapp Axis basic license 1TGMPAXIS.00-01.
    This license allows the use of a SCARA mechanical system. The maximum number of path-controlled axes is 4. One license is required per axis group. Included is the functionality of mapp Axis basic license 1TGMPAXIS.00-01.
    1TGMPSCARA.02
    B&R software license - MpScara - Single license - SCARA robot interface - Starting programs, jogging, etc. - Various coordinate systems - Support for modular software concepts - Web-based diagnostics and XML configuration The use of mapp flat-rate 1TGMPFLAT.02 is possible as an alternative. The license for the CNC channel and transformation must be ordered separately.
    B&R software license - MpScara - Single license - SCARA robot interface...
    1TGMPSCARAX.00-01
    This license allows the use of a SCARA mechanical system. There is no restriction on the number of path-controlled axes. One license is required per axis group; it is subject to the dual-use export restrictions per Regulation (EC) No. 428/2009 of the European Community. Also included is the functionality of mapp Axis basic license 1TGMPAXIS.00-01.
    This license allows the use of a SCARA mechanical system. There is no restriction on the number of path-controlled axes. One license is required per axis group; it is subject to the dual-use export restrictions per Regulation (EC) No. 428/2009 of the European Community. Also included is the functionality of mapp Axis basic license 1TGMPAXIS.00-01.
    1TGMPSEQ.20-01
    mapp Sequence makes it possible to implement dynamic machine sequences. It allows the operator to influence the production sequence as needed directly via the machine's HMI application without having to change the software.
    mapp Sequence makes it possible to implement dynamic machine sequences. It allows the operator to influence the production sequence as needed directly via the machine's HMI application without having to change the software.
    1TGMPSMCADV.10-01
    This license activates the use of the "openSAFETY advanced extension set" for SafeMOTION. License required for ACOPOS P3.
    This license activates the use of the "openSAFETY advanced extension set" for SafeMOTION. License required for ACOPOS P3.
    1TGMPSMCPOS.10-01
    This license activates the use of the "openSAFETY encoder basic set" for SafeMOTION. License required for ACOPOS P3.
    This license activates the use of the "openSAFETY encoder basic set" for SafeMOTION. License required for ACOPOS P3.
    1TGMPSMCVEL.10-01
    This license activates the use of the "openSAFETY speed extension set" for SafeMOTION. License required for ACOPOS P3.
    This license activates the use of the "openSAFETY speed extension set" for SafeMOTION. License required for ACOPOS P3.
    1TGMPSPINDLE.02
    B&R software license - MpSpindle - Single license - Axis spindle functionality - Interface to handheld operating device - Interface to CNC program - Support for modular software concepts - Web-based diagnostics and XML configuration The use of mapp flat-rate 1TGMPFLAT.02 is possible as an alternative.
    B&R software license - MpSpindle - Single license - Axis spindle functionality...
    1TGMPSRV.00-01
    Basic license for mapp Services Required to use extended functions of the mapp Technology Package. This license includes mapp AlarmX (alarm management), mapp IO (dynamic hardware configuration), mapp User (user management), mapp Alarm (alarm management with reference to VC4), mapp File (file explorer) and mapp Recipe (recipe management).
    Basic license for mapp Services Required to use extended functions of the mapp Technology Package. This license includes mapp AlarmX (alarm management), mapp IO (dynamic hardware configuration), mapp User (user management), mapp Alarm (alarm management with reference to VC4), mapp File (file explorer) and mapp Recipe (recipe management).
    1TGMPTEMP.10-01
    mapp Temperature provides functions for optimal control of temperature processes. Requirements such as autotuning controllers, zone-synchronous heating profiles, minimum overshoot or multi-zone control for heating and cooling processes can be easily configured.
    mapp Temperature provides functions for optimal control of temperature processes. Requirements such as autotuning controllers, zone-synchronous heating profiles, minimum overshoot or multi-zone control for heating and cooling processes can be easily configured.
    1TGMPTWEET.20-01
    mapp Tweet makes it possible to transmit messages directly from the machine. This allows service technicians to be informed of emergencies involving the machine via SMS text message. Quick responses to critical situations are possible via a direct connection to mapp AlarmX.
    mapp Tweet makes it possible to transmit messages directly from the machine. This allows service technicians to be informed of emergencies involving the machine via SMS text message. Quick responses to critical situations are possible via a direct connection to mapp AlarmX.
    1TGMPUSER.02
    B&R software license - MpUser - Single license - User and group management - Password management (e.g. expiration date) - Password encryption - Import and export of users and groups - Support for modular software concepts - Web-based diagnostics and XML configuration The use of mapp flat-rate 1TGMPFLAT.02 is possible as an alternative.
    B&R software license - MpUser - Single license - User and group management...
    1TGMPUSERX.02
    B&R software license - MpUserX - Single license - User and role management - Password management (e.g. expiration date) - Password encryption - Import and export of users and roles - Support for modular software concepts - Web-based diagnostics and XML configuration The use of mapp flat-rate 1TGMPFLAT.02 is possible as an alternative.
    B&R software license - MpUserX - Single license - User and role management...
    1TGMPUSERX.10-01
    mapp UserX allows the implementation of user management based on the Automation Studio user role system. This includes logging in/out, creating and editing users and saving additional user data (e.g. telephone numbers). Changes to user data can also be recorded as audit events.
    mapp UserX allows the implementation of user management based on the Automation Studio user role system. This includes logging in/out, creating and editing users and saving additional user data (e.g. telephone numbers). Changes to user data can also be recorded as audit events.
    1TGMPVAXIS.10-01
    Virtual axis for setpoint generation and axis couplings. License required for ACOPOS P3.
    Virtual axis for setpoint generation and axis couplings. License required for ACOPOS P3.
    1TGMPVIEW.00-01
    Contains mapp View server, one client license and a standard set of widgets
    Contains mapp View server, one client license and a standard set of widgets
    1TGMPVNCVIEW.20-01
    This widget establishes a connection to a VNC server and displays its contents in the web-based mapp View HMI application.
    This widget establishes a connection to a VNC server and displays its contents in the web-based mapp View HMI application.
    1TGSWAS.CRP.00-01
    The corporate license allows the use of Automation Studio by all users at a company at all of a company's sites, including all associated companies, for a period of one year. With the corporate license, it is permitted to license Automation Studio on a B&R Automation PC that is delivered with the machine if it can be guaranteed that only service personnel working for the machine or plant manufacturer will have access to that instance of Automation Studio. Licensing takes place via activation over the Internet. After one year, the license will automatically be extended an additional year and invoiced accordingly as long as the license has not been canceled before expiration. See the EULA at https://www.br-automation.com/en/service/automation-studio-licensing/.
    The corporate license allows the use of Automation Studio by all users at a company at all of a company's sites, including all associated companies, for a period of one year. With the corporate license, it is permitted to license Automation Studio on a B&R Automation PC that is delivered with the machine if it can be guaranteed that only service personnel...
    1TGSWAS.SNG.00-01
    The single license allows the use of Automation Studio by exactly one user for a period of one year. The license is saved on a Technology Guard (dongle). This permits multiple users to share the right to use Automation Studio on different workstations by connecting the Technology Guard with the single license to the respective workstation computer. After one year, the license will automatically be extended an additional year and invoiced accordingly as long as the license has not been canceled before expiration. The Technology Guard is not included as part of the single license and must be ordered separately. See the EULA at https://www.br-automation.com/en/service/automation-studio-licensing/.
    The single license allows the use of Automation Studio by exactly one user for a period of one year. The license is saved on a Technology Guard (dongle). This permits multiple users to share the right...
    1TGSWAS.STE.00-01
    A site license allows the use of Automation Studio by any number of users at a single company location. The users must be employed at the respective company site but can use Automation Studio regardless of their location (internationally active service technicians, for example). Licensing takes place via activation over the Internet. After one year, the license will automatically be extended an additional year and invoiced accordingly as long as the license has not been canceled before expiration. See the EULA at https://www.br-automation.com/en/service/automation-studio-licensing/.
    A site license allows the use of Automation Studio by any number of users at a single company location. The users must be employed at the respective company site but can use Automation Studio regardless of their location (internationally active service technicians, for example). Licensing takes place via activation over the Internet. After one year, the license will automatically be extended an additional year and invoiced accordingly as long as the license has not been canceled before expiration. See the EULA at https://www.br-automation.com/en/service/automation...
    1TGSWAS.STE.E0-01
    This license permits the licensing of any number of users for educational purposes at the site of the educational facility. The license expires after 400 calendar days and cannot be extended. The license also includes use of the software on private PCs belonging to students as long as individual, name-based registration takes place. See the EULA at https://www.br-automation.com/en/service/automation-studio-licensing/.
    This license permits the licensing of any number of users for educational purposes at the site of the educational facility. The license expires after 400 calendar days and cannot...
Share
This site uses cookies to enable a better customer experience. By continuing to browse the site you are agreeing to our use of cookies. Please find more information about cookies in our Privacy Policy.