X90SM546.02-00

Short description
I/O module 2 stepper motor outputs
General information
B&R ID code 0xFABA
Status indicators -
Diagnostics
Module run/error Yes, using software
Supply voltage monitoring Yes, using software
Power consumption
Bus Max. 0.1 W
Certifications
CE Yes
UKCA Yes
Motor bridge - Power unit
Quantity 2
Type Stepper motor (full-bridge)
Nominal voltage 48 VDC
Nominal current 4 A
Max. current/motor 8 A
Step resolution 256 microsteps per full step
Electrical properties
Electrical isolation No
Operating conditions
Mounting orientation
Any Yes
Degree of protection per EN 60529 Up to IP69K
Ambient conditions
Temperature
Operation
Horizontal mounting orientation -40 to 85°C housing surface
Vertical mounting orientation -40 to 85°C housing surface
Storage -40 to 85°C
Transport -40 to 85°C
Relative humidity
Operation 5 to 100%, condensing
Storage 5 to 100%, condensing
Transport 5 to 100%, condensing
Mechanical properties
Dimensions
Width 47 mm
Length 95 mm
Materiálové číslo:
X90SM546.02-00
Popis:
  • 2 stepper motors with 4 A
  • 15 to 60 VDC
  • X2X Link

The SM option board offers the possibility of connecting two 4 A stepper motors with 15 to 60 V. Communication with the mainboard is made possible via X2X Link.

Vyberte prosím zemi a jazyk

B&R Logo