Please choose country and language

General information
B&R ID code 0xB1CD
Configuration software Automation Studio (version 3.0.81 and higher) / SYCONnet
Certifications
CE Yes
UL cULus E115267
Industrial control equipment
HazLoc cULus HazLoc E180196
Industrial control equipment
for hazardous locations
Class I, Division 2, Groups ABCD
EAC Product family certification
Controller
Processor netX 100
Dual-port memory 64 kB
Fieldbus
Type PROFIBUS DP master
Variant 9-pin, male, DSUB connector
Transfer rate Max. 12 Mbit/s
Slaves Max. 125
Cyclic data Max. 7168 bytes
DPV1 class 1, 2 Yes
Configuration data 244 byte / slave
Application-specific parameters 237 byte / slave
Electrical properties
Nominal voltage +3.3 V ±5%
Nominal current 650 mA
Ambient conditions
Temperature
Operation 0 to 55°C
Mechanical properties
Dimensions
Width 120 mm
Height 73.2 mm
Depth 18.5 mm
Slot Standard PCI half-size module, Plug & Play
Installation in
B&R Automation PC Yes
B&R Panel PC Yes
Desktop PC Yes
Produktové číslo:
5ACPCI.XDPM-00
Popis:

The 5ACPCI.XDPM-00 is equipped with a ProfibusDP master interface and can therefore be used as a master in a ProfibusDP network. Data is exchanged via the dual port memory.

Automation Studio HW Upgrades Verze (Datum) Stáhnout
V3.0 HW Upgrade (5ACPCI.XDPM-00) EXE / 638 KB
V4.0 HW Upgrade (5ACPCI.XDPM-00) EXE / 551 KB
Dokumentace Verze (Datum) Stáhnout
B&R Hilscher Fieldbus cards PDF / 3 MB
Datasheet 5ACPCI.XDPM-00 PDF / 678 KB
E-CAD (Electro or EPLAN Templates) Verze (Datum) Stáhnout
APC EPLAN P8 from V2.4 EXE / 90 MB
Firmware Upgrades Verze (Datum) Stáhnout
Hilscher firmware (5ACPCI.XDPM-00) ZIP / 229 KB

Please choose country and language

B&R Logo

Please choose country

B&R Logo