General information
Controller
| Processor | netX 100 |
| Dual-port memory | 64 kB |
Fieldbus
| Type | PROFIBUS DP master |
| Variant | DSUB, 9-pin, male |
| Transfer rate | Max. 12 Mbit/s |
| Slaves | Max. 125 |
| Cyclic data | Max. 7168 bytes |
| DPV1 class 1, 2 | Yes |
| Configuration data | 244 bytes/slave |
| Application-specific parameters | 237 bytes/slave |
Electrical properties
| Nominal voltage | +3.3 V ±5% |
| Nominal current | 650 mA |
Ambient conditions
| Temperature | |
| Operation | 0 to 55°C |
Mechanical properties
| Dimensions | |
| Width | 120 mm |
| Height | 73.2 mm |
| Depth | 18.5 mm |
| Slot | Standard PCI half-size module, plug and play |
| Installation in | |
| B&R Automation PC | Yes |
| B&R Panel PC | Yes |
| Desktop PC | Yes |
Номер модель:
5ACPCI.XDPM-00Описание:
The 5ACPCI.XDPM-00 is equipped with a ProfibusDP master interface and can therefore be used as a master in a ProfibusDP network. Data is exchanged via the dual port memory.
| E-CAD (Electro или EPLAN шаблоны) | Версия (Дата) | Загрузка |
|---|---|---|
| APC EPLAN P8 from V2.4 | EXE / 99 МБ |
| Документация | Версия (Дата) | Загрузка |
|---|---|---|
| B&R Hilscher Fieldbus cards | PDF / 3 МБ | |
| Datasheet 5ACPCI.XDPM-00 | PDF / 680 кБ |
| Обновление Automation Studio HW | Версия (Дата) | Загрузка |
|---|---|---|
| V3.0 HW Upgrade (5ACPCI.XDPM-00) | EXE / 638 кБ | |
| V4.0 HW Upgrade (5ACPCI.XDPM-00) | EXE / 863 кБ |
| Обновление прошивки | Версия (Дата) | Загрузка |
|---|---|---|
| Hilscher firmware (5ACPCI.XDPM-00) | ZIP / 199 кБ |