DWL@DWL10000559626
| Verze | Jazyk | Operační systém | Datum | Velikost | Typ | Stáhnout |
|---|---|---|---|---|---|---|
| 2.3.0.1 | * | 09.09.2020 | 425 KB | EXE | AS4_HW_8CVI045H1HCS0.00-1.exe | |
| Popis |
V4.0 HW Upgrade (8CVI045H1HCS0.00-1) Revision information 8CVI045E1HCS0.00-1 Version 2.3.0.1: ID: 682250 Parameter "SdcEnabled"initialized incorrectly Data type of parameter was changed to STRING andinital value to "off". Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 682430 Add-on for usage of automatic DNA configuration Feature add-on "DNA Configuration automatic" from Automation Studio 4.9 Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 687605 8CVI: Simulation mode erroneously not available The section for simulation mode was erroneously missing in the HWX file. Channel description changed: No Configuration description changed: Yes Firmware changed: No Version 2.3.0.0: ID: 600410 Misconfiguration of mapp Motion axis assignment not detected in Automation Studio mapp Motion axes can be assigned to a drive multiple times. This error is not recognized until runtime. Corrected in combination with: - mapp Motion V5.4.0 - Automation Studio V4.4.4 Channel description changed: No Configuration description changed: No Firmware changed: No Version 2.2.0.0: ID: 549230 Support of motion system mapp Motion HWX file extended for usage with motion system mapp Motion. Channel description changed: No Configuration description changed: No Firmwarechanged: No Version 1.0.0.6: ID: 395665 HW upgrade for 8CVI045E1HCS0.00-1 Correction of HWX file respective to passive powersupply and wizard With the "power supply = passive" setting it could happen that: -the ACOPOSmulti modul did not establish a powerlinkcommunication (ACOPOS errornumber 32225) -X2X I/O modlues did not work correct at X2X bus (preoperational state) -the powerlinkbus couldn't get started (PLK errornumber 30257) -Logger messages like "XML parse error near xx, xx" were recorded Channel description changed: No Configuration description changed: No Firmware changed: No Version 1.0.0.1: ID: 328650 Support of 8CVI045E1HCS0.00-1 Channel description changed: No Configuration description changed: No Firmware changed: No |
|||||
| Verze | Jazyk | Operační systém | Datum | Velikost | Typ | Stáhnout |
| 2.3.0.0 | * | 17.09.2018 | 381 KB | EXE | AS4_HW_8CVI045H1HCS0.00-1.exe | |
| Popis |
V4.0 HW Upgrade (8CVI045H1HCS0.00-1) Revision information 8CVI045E1HCS0.00-1 Version 2.3.0.0: ID: 600410 Misconfiguration of mapp Motion axis assignment not detected in Automation Studio mapp Motion axes can be assigned to a drive multiple times. This error is not recognized until runtime. Corrected in combination with: - mapp Motion V5.4.0 - Automation Studio V4.4.4 Channel description changed: No Configuration description changed: No Firmware changed: No Version 2.2.0.0: ID: 549230 Support of motion system mapp Motion HWX file extended for usage with motion system mapp Motion. Channel description changed: No Configuration description changed: No Firmware changed: No Version 1.0.0.6: ID: 395665 HW upgrade for 8CVI045E1HCS0.00-1 Correction of HWX file respective to passive powersupply and wizard With the "power supply = passive" setting it could happen that: -the ACOPOSmulti modul did not establish a powerlinkcommunication (ACOPOS errornumber32225) -X2X I/O modlues did not work correct at X2X bus (preoperational state) -the powerlinkbus couldn't get started (PLK errornumber 30257) -Logger messages like "XML parse error near xx, xx" were recorded Channel description changed: No Configuration description changed: No Firmware changed: No Version 1.0.0.1: ID: 328650 Support of 8CVI045E1HCS0.00-1 Channel description changed: No Configuration description changed: No Firmware changed: No |
|||||
