X20CM6209

Short description
I/O module 6 diodes, 24 VDC
General information
B&R ID code 0xA7A1
Power consumption
Bus -
Internal I/O -
Certifications
CE Yes
UKCA Yes
ATEX Zone 2, II 3G Ex nA nC IIA T5 Gc
IP20, Ta (see X20 user's manual)
FTZÚ 09 ATEX 0083X
UL cULus E115267
Industrial control equipment
HazLoc cCSAus 244665
Process control equipment
for hazardous locations
Class I, Division 2, Groups ABCD, T5
KC Yes
Diode array
Variant Schottky diode
Nominal voltage 24 VDC
Nominal input current 1 A
Threshold voltage Typ. 0.3 V
Input voltage 24 VDC -15% / +20%
Summation current 6 A, see section "Derating".
Short-circuit proof No
Operating conditions
Mounting orientation
Horizontal Yes
Vertical Yes
Installation elevation above sea level
0 to 2000 m No limitation
>2000 m Reduction of ambient temperature by 0.5°C per 100 m
Degree of protection per EN 60529 IP20
Ambient conditions
Temperature
Operation
Horizontal mounting orientation 0 to 55°C
Vertical mounting orientation 0 to 50°C
Derating See section "Derating".
Storage -25 to 70°C
Transport -25 to 70°C
Relative humidity
Operation 5 to 95%, non-condensing
Storage 5 to 95%, non-condensing
Transport 5 to 95%, non-condensing
Mechanical properties
Note Order 1x terminal block X20TB12,
order 1x bus module X20BM11 1x power supply bus module X20BM01 separately.
Pitch 12.5+0.2 mm
Malzeme numarası:
X20CM6209
Açıklama:
  • 6 potential-free diodes
  • 24 VDC
  • 1 A current load for each diode

This module is a diode array module with six diodes. The diodes can be used as freewheeling diodes or decoupling diodes.

The diode array module has no connection to X2X Link. It behaves like a dummy module.

Zorunlu aksesuarlar
Bus modules
X20BM11 X20 bus module, 24 VDC keyed, internal I/O power supply connected through
X20BM15 X20 bus module, with node number switch, 24 VDC keyed, internal I/O power supply connected through
Terminal blocks
X20TB12 X20 terminal block, 12-pin, 24 VDC keyed

Lütfen ülke ve dil seçin

B&R Logo