80MPF1.250S000-01

Short description
Stepper motor Stepper motor flange size 60 mm, length 51.8 mm
General information
Certifications
CE Yes
Specific motor data
Wiring
Serial true
Parallel true
Current
Series wiring 2.5 A
Parallel wiring 5 A
Resistance/Phase
Series wiring 1.28 Ω
Parallel wiring 0.32 Ω
Inductance/Phase
Series wiring 3.4 mH
Parallel wiring 0.85 mH
Stall torque 0.8 Nm
Holding torque 1.1 Nm
Detent torque <35 mNm
Rotor inertia 280 gcm2
General motor data
Protection class IP30
Stepping angle 1.8°
Max. surface temperature 100°C
Average period of operation between failures 21,000 hours
Cable length 300 mm
Cable cross section 22 AWG
Shaft type Flat-sided shaft (D-cut)
Insulation class B (130°C)
Insulation resistance 100 MΩ min. 500 VDC
Dielectric resistance 500 VAC for 1 minute
Driver supply voltage Max. 80 VDC
Ambient conditions
Temperature
Operation -20 to 40°C
Storage -30 to 85°C
Transport -30 to 85°C
Relative humidity
Operation 5 to 95%, non-condensing
Storage 5 to 95%, non-condensing
Transport 5 to 95%, non-condensing
Mechanical properties
Max. radial load 75 N
Max. axial load The permissible axial load is not permitted to be greater than the motor mass.
Weight 620 g
Length 51.8 mm
Materiálové číslo:
80MPF1.250S000-01
Popis:
2-phase hybrid stepper motor, 60 mm flange, length 51.8 mm, 2.5 A serial / 5 A parallel, 1.1 Nm holding torque, 0.8 Nm stall torque
Volitelné příslušenství
Accessories
80XMPDXRE.W1-10 IP expansion and wiring clamp for stepper motors in the 80MPD and 80MPF series, IP65 for 80MPD motors and 80MPF motors, 10 units per package

Vyberte prosím zemi a jazyk

B&R Logo