cULus HazLoc E180196 Industrial control equipment for hazardous locations Class I, Division 2, Groups ABCD, T4
DNV
Temperature: B (0 - 55°C) Humidity: B (up to 100%) Vibration: A (0.7 g) EMC: B (bridge and open deck)
LR
ENV3
KR
Yes
ABS
Yes
BV
EC31B Temperature: 5 - 55°C Vibration: 0.7 g EMC: Bridge and open deck
EAC
Product family certification
Controller
nvSRAM
Size
512 kB
Data retention
20 years
Read/Write endurance
Min. 1,000,000
Remanent variables in power failure mode
256 kB (for e.g. Automation Runtime, see Automation Help)
Interfaces
POWERLINK
Quantity
1
Type
Type 4
Variant
RJ45, shielded
Transfer rate
100 Mbit/s
Transfer
100BASE-TX
Line length
Max. 100 m between two stations (segment length)
CAN
Quantity
2
Variant
10-pin, male
Transfer rate
Max. 1 Mbit/s
Terminating resistor
Type
Can be switched on and off with slide switch
Default setting
Each off
X2X
Type
X2X Link master
Quantity
1
Variant
10-pin, male, galvanically isolated
Electrical properties
Power consumption
2 W
Operating conditions
Pollution degree per EN 61131-2
Pollution degree 2
Ambient conditions
Temperature
Operation
-20 to 55°C
Storage
-20 to 60°C
Transport
-20 to 60°C
Relative humidity
Operation
5 to 90%, non-condensing
Storage
5 to 95%, non-condensing
Transport
5 to 95%, non-condensing
Mechanical properties
Weight
25 g
Materiálové číslo:
5ACCIF01.FPCC-000
Popis:
1x POWERLINK interface managing or controlled node
2x CAN bus master interfaces
1x X2X Link master interface
512 kB nvSRAM
Compatible with APC2100/PPC2100 and APC2200/PPC2200
Interface option 5ACCIF01.FPCC-000 is equipped with a POWERLINK interface, 2 CAN bus master interfaces and an X2X Link master interface. In addition, 512 kB nvSRAM is installed.