DWL@DWL10000604627
| Verze | Jazyk | Operační systém | Datum | Velikost | Typ | Stáhnout |
|---|---|---|---|---|---|---|
| 2.5.0.0 | * | 22.09.2021 | 944 KB | EXE | AS4_HW_X20ST4492.exe | |
| Popis |
V4.6 HW Upgrade (X20ST4492) Revision information X20ST4492 Version 2.5.0.0: ID: 720250 Improved stability of FW during internalhardware tests Improved stability of FW during internal hardware tests Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 10\46105_1.fw(574) Version 2.4.0.0: ID: 719750 Failsafe at every boot It could happen under rare conditions that the module is stuck in failsafe state at every boot,generating logger messages: -1073565951/-1073561855 "internal cross communication error EPS" or -1073565945/-1073561849 "Received crc data is not equal to sent crc data" Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 726640 The power calculation of the modules is supported The data for the power calculation of the data sheet is included in the HWX. Channel description changed: No Configuration description changed: No Firmware changed: No ID: 727150 New data sheet V2.10 For changes see chapter "Version history" in the data sheet. Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 10\46105_1.fw(573) Version 2.3.0.0: ID: 714555 Handling of ADC-Tests adjusted Handling of ADC-Tests if DisableShuntTest=Yes is adjusted. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 714575 Limit values for themodule cycle time adjusted The limit values for the calculation and monitoring of module cycle time and slot time adjusted. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 714590 New data sheet V2.08 For changes see chapter "Version history" in the data sheet. Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 10\46105_1.fw(572) Version 2.2.0.0: ID: 613330 / Support ID:400263334 Changes in mappSafety firmware Bug was fixed with the firmware changes for mappSafety. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 668615 Adaptations for Automation Studio 4.8 Channel description changed: No Configuration description changed: No Firmware changed: No ID: 688765 / Support ID: 400299371 Loss of safety connection Lossof safety connection, even though the parametrized "safe data duration"is longer than the network failure Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 689715 Propagation delay statistics The Propagation delay statistics can now be read out. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 689950 Improvement of the internal voltage monitoring. Improvement of the internal voltage monitoring. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 690095 New data sheet V2.06 For changes see chapter "Version history" in the data sheet. Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 10\46105_1.fw(571) Version 2.1.0.0: ID: 568660 / Support ID: 400247281 Documentation of testcase sequence corrected Bug in documentation of test case sequence was corrected Channel description changed: No Configuration description changed: No Firmware changed: No ID: 644175 major (even incompatible) changes for mapp Safety First upgrade for mapp Safety. ATTENTION: existing applications must be adapted - see chapter "Switching to mapp Safety" in help! Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 10\46105_1.fw(570) Version 1.10.10.0: ID: 622665 Sporadic errors 114982, 102914, 120065, 110385 Sporadic errors 114982, 102914, 120065, 110385 have been fixed Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 3\46105_1.fw(295), 4\46105_1.fw(301), 5\46105_1.fw(302), 6\46105_1.fw(331) Version 1.10.9.1: ID: 643235 data sheet V1.141 See chapture "Version history" in the data sheet. i.a. calculation of Safety response time has been updated. Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\46105_1.fw(295), 4\46105_1.fw(301), 5\46105_1.fw(302), 6\46105_1.fw(330) Version 1.10.9.0: ID: 618285 logger entry 112174, 108078 Logger entry 112174, 108078 could happen sporadically with large projects. Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 3\46105_1.fw(295), 4\46105_1.fw(301), 5\46105_1.fw(302), 6\46105_1.fw(330) Version 1.10.1.5: ID: 585625 User configurable calculation of the input value during internal tests alsoin AS 3.x User configurable calculation of the input value during internal tests alsoin AS 3.x Channel description changed: Yes Configuration description changed: Yes Firmware changed: No ID: 585630 SafeThrSelector_0506_Bitx not working - Fix in AS 3.x The selection of the thresholds to use for channel 5 and 6 by SafeThrSelector_0506_Bitx is not working. Subsequently always the first thresholds are used. Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 3\46105_1.fw(295), 4\46105_1.fw(301), 5\46105_1.fw(302), 6\46105_1.fw(322) Version 1.10.1.1: ID: 533055 Add blackout mode Add blackout mode Channel description changed: No Configuration description changed: No Firmware changed: No ID: 533145 New channelfor ConnectionValid New channel for ConnectionValid Channel description changed: No Configuration description changed: No Firmware changed: No ID: 533195 Update ECAD data Update ECAD data Channel description changed: No Configuration description changed: No Firmware changed: No ID: 536305 SafeThrSelector_0506_Bitx not working The selection of the thresholds to use for channel 5 and 6 by SafeThrSelector_0506_Bitx is not working. Subsequently always the first thresholdsare used. Channel description changed: No Configuration descriptionchanged: No Firmware changed: Yes ID: 539130 User configurable calculation of the input value during internal tests User configurable calculation of the input value during internal tests Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\46105_1.fw(295), 4\46105_1.fw(301), 5\46105_1.fw(302), 6\46105_1.fw(322) Version 1.10.0.1: ID: 470650 changed manual verion to 1.100 changed manual verion to 1.100 Channel description changed: No Configuration description changed: No Firmware changed: No ID: 470655 Support of release 1.10 including openSAFETY 1.5 Support of release 1.10 including openSAFETY 1.5 with easier parametrization of timing parameters Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 3\46105_1.fw(295), 4\46105_1.fw(301), 5\46105_1.fw(302), 6\46105_1.fw(321) Version 1.9.0.0: ID: 404205 safety response time The safety response time is now depending on the configured filter. Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 3\46105_1.fw(295), 4\46105_1.fw(301), 5\46105_1.fw(302) Version 1.7.0.1: ID: 388465 internal Adjustments internal Adjustments Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\46105_1.fw(295), 4\46105_1.fw(301) Version 1.7.0.0: ID: 372070 changed manual verion to 1.70 changed manual verion to 1.70 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\46105_1.fw(295), 4\46105_1.fw(301) Version 1.6.0.98: ID: 370680 / Support ID: 400107215 Violation of cycle time in PreOp with input filter 1ms Functions were rearranged in PreOp to comply with the cycle time for all filters. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 370690 The module also supports SafetyRelease 1.8 Starting with this version, the module also supports SafetyRelease 1.8. SafetyRelease 1.8 serves as basis for the backward compatibility Channel description changed:No Configuration description changed: No Firmware changed: Yes Firmware: 3\46105_1.fw(295), 4\46105_1.fw(301), 5\46105_1.fw(311) Version 1.6.0.7: ID: 339295 internal Adjustments internal Adjustments Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\46105_1.fw(295) Version 1.6.0.5: ID: 335505 The module also supports SafetyRelease 1.7 Starting with this version, the module also supports SafetyRelease 1.7 Channel description changed: No Configuration description changed:No Firmware changed: No ID: 335510 / Support ID: 400083263 unlock of SafeModule IDs > 300 SafeModule IDs up to 1023 are now unlocked Channel description changed: No Configuration description changed:No Firmware changed: No Firmware: 3\46105_1.fw(295) Version 1.6.0.3: ID: 332250 The module also supports SafetyRelease 1.7 Starting with this version, the module also supports SafetyRelease 1.7 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\46105_1.fw(295) Version 1.6.0.2: ID: 328595 Correction for responsetimecalculator Correction of parameters used for the calculation of the worstcase responsetime in Release 1.6 with the responsetimecalculator. Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 3\46105_1.fw(295) Version 1.6.0.1: ID: 314585 Adaption of module configuration file release 1.6 Adaption of module configuration file release 1.6 Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 3\46105_1.fw(295) Version 1.5.0.5: ID: 312420 added pindefinitions for EPLAN export added pindefinitions for EPLAN export Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\46105_1.fw(295) Version 1.5.0.4: ID: 303410 Support of AutomationStudio 4.0 Support of AutomationStudio 4.0 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\46105_1.fw(295) Version 1.5.0.0: ID: 293960 First Official Release First Official Release Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\46105_1.fw(295) |
|||||
| Verze | Jazyk | Operační systém | Datum | Velikost | Typ | Stáhnout |
| 2.4.0.0 | * | 09.06.2021 | 945 KB | EXE | AS4_HW_X20ST4492.exe | |
| Popis |
V4.6 HW Upgrade (X20ST4492) Revision information X20ST4492 Version 2.4.0.0: ID: 719750 Failsafe at every boot It could happen under rare conditions that the module is stuck in failsafe state at every boot, generating logger messages: -1073565951/-1073561855 "internal cross communication error EPS" or -1073565945/-1073561849 "Received crc data is not equal to sent crc data" Channel description changed: No Configurationdescription changed: No Firmware changed: Yes ID: 726640 The power calculation of the modules is supported The data for the power calculation of the data sheet is included in the HWX. Channel description changed: No Configuration description changed: No Firmware changed: No ID: 727150 New data sheet V2.10 For changes see chapter "Version history" in the data sheet. Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 10\46105_1.fw(573) Version 2.3.0.0: ID: 714555 Handlingof ADC-Tests adjusted Handling of ADC-Tests if DisableShuntTest=Yes is adjusted. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 714575 Limit values for the module cycle time adjusted The limit values for the calculation andmonitoring of module cycle time andslot time adjusted. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 714590 New data sheet V2.08 For changes see chapter "Version history" in the data sheet. Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 10\46105_1.fw(572) Version 2.2.0.0: ID: 613330 / Support ID: 400263334 Changes in mappSafety firmware Bug was fixed with the firmware changes for mappSafety. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 668615 Adaptations for Automation Studio 4.8 Channel description changed: No Configuration description changed: No Firmware changed: No ID: 688765 / Support ID: 400299371 Loss of safety connection Loss of safety connection, even though the parametrized "safe data duration" is longer than the network failure Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 689715 Propagation delay statistics The Propagation delay statistics can now be read out. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 689950 Improvement of the internal voltage monitoring. Improvement of the internal voltage monitoring. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 690095 New data sheet V2.06 For changes see chapter "Version history" in the data sheet. Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 10\46105_1.fw(571) Version 2.1.0.0: ID: 568660 / Support ID: 400247281 Documentation oftest case sequence corrected Bug in documentation of test case sequence was corrected Channel description changed: No Configuration description changed: No Firmware changed: No ID: 644175 major (evenincompatible) changes for mapp Safety First upgrade for mapp Safety. ATTENTION: existing applications must be adapted - see chapter "Switching to mapp Safety" in help! Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 10\46105_1.fw(570) Version 1.10.10.0: ID: 622665 Sporadic errors 114982, 102914, 120065, 110385 Sporadic errors 114982, 102914, 120065, 110385 have been fixed Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 3\46105_1.fw(295), 4\46105_1.fw(301), 5\46105_1.fw(302), 6\46105_1.fw(331) Version 1.10.9.1: ID: 643235 data sheet V1.141 See chapture "Version history" in the data sheet. i.a. calculation of Safety response time has beenupdated. Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\46105_1.fw(295), 4\46105_1.fw(301), 5\46105_1.fw(302), 6\46105_1.fw(330) Version 1.10.9.0: ID: 618285 logger entry 112174, 108078 Logger entry 112174, 108078 could happen sporadically with large projects. Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 3\46105_1.fw(295), 4\46105_1.fw(301), 5\46105_1.fw(302), 6\46105_1.fw(330) Version 1.10.1.5: ID: 585625 User configurable calculation of the input value during internal tests alsoin AS 3.x User configurable calculation of the input value during internal tests alsoinAS 3.x Channel description changed: Yes Configuration description changed: Yes Firmware changed: No ID: 585630 SafeThrSelector_0506_Bitx not working - Fix in AS 3.x The selection of the thresholds touse for channel 5 and 6 by SafeThrSelector_0506_Bitx is not working. Subsequently always the first thresholds are used. Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 3\46105_1.fw(295), 4\46105_1.fw(301), 5\46105_1.fw(302), 6\46105_1.fw(322) Version 1.10.1.1: ID: 533055 Add blackout mode Add blackout mode Channel description changed: No Configuration description changed: No Firmware changed: No ID: 533145 New channel for ConnectionValid New channel for ConnectionValid Channel description changed: No Configuration description changed: No Firmwarechanged: No ID: 533195 Update ECAD data Update ECAD data Channel description changed: No Configuration description changed: No Firmware changed: No ID: 536305 SafeThrSelector_0506_Bitx not working The selection of the thresholds to use for channel 5 and 6 bySafeThrSelector_0506_Bitx is not working. Subsequently always the first thresholds are used. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 539130 User configurable calculation of the input value during internal tests User configurable calculation of the input value during internal tests Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\46105_1.fw(295), 4\46105_1.fw(301), 5\46105_1.fw(302), 6\46105_1.fw(322) Version 1.10.0.1: ID: 470650 changed manual verion to 1.100 changed manual verion to 1.100 Channel description changed: No Configuration description changed: No Firmware changed: No ID: 470655 Support of release 1.10 including openSAFETY 1.5 Support of release 1.10 including openSAFETY 1.5 with easier parametrization of timing parameters Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 3\46105_1.fw(295), 4\46105_1.fw(301), 5\46105_1.fw(302), 6\46105_1.fw(321) Version 1.9.0.0: ID: 404205 safety response time The safety response time is now depending on the configured filter. Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 3\46105_1.fw(295), 4\46105_1.fw(301), 5\46105_1.fw(302) Version 1.7.0.1: ID: 388465 internal Adjustments internal Adjustments Channel description changed: No Configurationdescription changed: No Firmware changed: No Firmware: 3\46105_1.fw(295), 4\46105_1.fw(301) Version 1.7.0.0: ID: 372070 changed manual verion to 1.70 changed manual verion to 1.70 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\46105_1.fw(295), 4\46105_1.fw(301) Version 1.6.0.98: ID: 370680 / Support ID: 400107215 Violation of cycle time in PreOp with input filter 1ms Functions were rearranged in PreOp tocomply with the cycle time for all filters. Channel description changed:No Configuration description changed: No Firmware changed: Yes ID: 370690 The module also supports SafetyRelease 1.8 Starting with this version, the module also supports SafetyRelease 1.8. SafetyRelease 1.8 serves as basis for the backward compatibility Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 3\46105_1.fw(295), 4\46105_1.fw(301), 5\46105_1.fw(311) Version 1.6.0.7: ID: 339295 internal Adjustments internal Adjustments Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\46105_1.fw(295) Version 1.6.0.5: ID: 335505 The module also supports SafetyRelease 1.7 Starting with this version, the module also supports SafetyRelease 1.7 Channel description changed: No Configuration description changed: No Firmware changed: No ID: 335510 / Support ID: 400083263 unlock of SafeModule IDs > 300 SafeModule IDs up to 1023 are now unlocked Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\46105_1.fw(295) Version 1.6.0.3: ID: 332250 The module also supports SafetyRelease 1.7 Starting with this version, the module also supports SafetyRelease 1.7 Channel description changed: No Configuration description changed:No Firmware changed: No Firmware: 3\46105_1.fw(295) Version 1.6.0.2: ID: 328595 Correction for responsetimecalculator Correction of parameters used for the calculation of the worstcase responsetimein Release 1.6 with the responsetimecalculator. Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 3\46105_1.fw(295) Version 1.6.0.1: ID: 314585 Adaption of module configuration file release 1.6 Adaption of module configuration file release 1.6 Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 3\46105_1.fw(295) Version 1.5.0.5: ID: 312420 added pindefinitions for EPLAN export added pindefinitions for EPLAN export Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\46105_1.fw(295) Version 1.5.0.4: ID: 303410 Support of AutomationStudio 4.0 Support of AutomationStudio 4.0 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\46105_1.fw(295) Version 1.5.0.0: ID: 293960 First Official Release First Official Release Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\46105_1.fw(295) |
|||||
| Verze | Jazyk | Operační systém | Datum | Velikost | Typ | Stáhnout |
| 2.3.0.0 | * | 08.03.2021 | 940 KB | EXE | AS4_HW_X20ST4492.exe | |
| Popis |
V4.6 HW Upgrade (X20ST4492) Revision information X20ST4492 Version 2.3.0.0: ID: 714555 Handling of ADC-Tests adjusted Handling of ADC-Tests if DisableShuntTest=Yes is adjusted. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 714575 Limit values for the module cycle time adjusted The limit values for the calculation and monitoring of module cycle timeandslot time adjusted. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 714590 New data sheet V2.08 For changes see chapter "Version history" in the data sheet. Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 10\46105_1.fw(572) Version 2.2.0.0: ID: 613330 / Support ID: 400263334 Changes in mappSafety firmware Bug was fixed with the firmware changes for mappSafety. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 668615 Adaptations for Automation Studio 4.8 Channel description changed: No Configuration description changed: No Firmware changed: No ID: 688765 / Support ID:400299371 Loss of safety connection Loss of safety connection, eventhough the parametrized "safe data duration"is longer than the network failure Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 689715 Propagation delay statistics The Propagation delay statistics can now be read out. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 689950 Improvement of the internal voltagemonitoring. Improvement of the internal voltage monitoring. Channeldescription changed: No Configuration description changed: No Firmware changed: Yes ID: 690095 New data sheet V2.06 For changes see chapter "Version history" in the data sheet. Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 10\46105_1.fw(571) Version 2.1.0.0: ID: 568660/ Support ID: 400247281 Documentation of test case sequence corrected Bug in documentation of test case sequence was corrected Channel description changed: No Configuration description changed: No Firmware changed: No ID: 644175 major (even incompatible) changes for mapp Safety First upgrade for mapp Safety. ATTENTION: existing applicationsmust be adapted - see chapter "Switching to mapp Safety" in help! Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 10\46105_1.fw(570) Version 1.10.10.0: ID: 622665 Sporadic errors 114982, 102914, 120065, 110385 Sporadic errors 114982, 102914, 120065, 110385 have been fixed Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 3\46105_1.fw(295), 4\46105_1.fw(301), 5\46105_1.fw(302), 6\46105_1.fw(331) Version 1.10.9.1: ID: 643235 data sheet V1.141 See chapture "Version history" in the data sheet. i.a. calculation of Safety response time has been updated. Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\46105_1.fw(295), 4\46105_1.fw(301), 5\46105_1.fw(302), 6\46105_1.fw(330) Version 1.10.9.0: ID: 618285 logger entry 112174, 108078 Logger entry 112174, 108078 could happen sporadically with large projects. Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 3\46105_1.fw(295), 4\46105_1.fw(301), 5\46105_1.fw(302), 6\46105_1.fw(330) Version 1.10.1.5: ID: 585625 User configurable calculation of the input value during internal tests alsoin AS 3.x User configurable calculation ofthe input value during internal tests also in AS 3.x Channel descriptionchanged: Yes Configuration description changed: Yes Firmware changed: No ID: 585630 SafeThrSelector_0506_Bitx not working - Fix in AS 3.x The selection of the thresholds to use for channel 5 and 6 by SafeThrSelector_0506_Bitx is not working. Subsequently always the first thresholdsare used. Channel description changed: No Configuration descriptionchanged: Yes Firmware changed: No Firmware: 3\46105_1.fw(295), 4\46105_1.fw(301), 5\46105_1.fw(302), 6\46105_1.fw(322) Version 1.10.1.1: ID: 533055 Add blackout mode Add blackout mode Channel description changed: No Configuration description changed: No Firmware changed: No ID: 533145 New channel for ConnectionValid New channel for ConnectionValid Channel description changed: No Configuration description changed: No Firmware changed: No ID: 533195 Update ECAD data Update ECAD data Channel description changed:No Configuration description changed: No Firmware changed: No ID: 536305 SafeThrSelector_0506_Bitx not working The selection of the thresholds to use for channel 5 and 6 by SafeThrSelector_0506_Bitx is not working. Subsequently always the first thresholds are used. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 539130 User configurable calculation of the input value during internal tests User configurable calculation of the inputvalue during internal tests Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\46105_1.fw(295), 4\46105_1.fw(301), 5\46105_1.fw(302), 6\46105_1.fw(322) Version 1.10.0.1: ID: 470650 changed manual verion to 1.100 changed manual verion to 1.100 Channel description changed: No Configuration description changed: No Firmware changed: No ID: 470655 Support of release 1.10 including openSAFETY 1.5 Support of release 1.10 including openSAFETY 1.5 with easier parametrization of timing parameters Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 3\46105_1.fw(295), 4\46105_1.fw(301), 5\46105_1.fw(302), 6\46105_1.fw(321) Version 1.9.0.0: ID:404205 safety response time The safety response time is now depending on the configured filter. Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 3\46105_1.fw(295), 4\46105_1.fw(301), 5\46105_1.fw(302) Version 1.7.0.1: ID: 388465 internal Adjustments internal Adjustments Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\46105_1.fw(295), 4\46105_1.fw(301) Version 1.7.0.0: ID: 372070 changed manual verion to 1.70 changed manual verion to 1.70 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\46105_1.fw(295), 4\46105_1.fw(301) Version 1.6.0.98: ID: 370680 / Support ID: 400107215 Violation of cycle time in PreOp with input filter 1ms Functions were rearranged in PreOp to comply with the cycle time for all filters. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 370690 The module also supports SafetyRelease 1.8 Starting with this version, the module also supports SafetyRelease 1.8. SafetyRelease 1.8 serves as basis for the backward compatibility Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 3\46105_1.fw(295), 4\46105_1.fw(301), 5\46105_1.fw(311) Version 1.6.0.7: ID: 339295 internal Adjustments internal Adjustments Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\46105_1.fw(295) Version 1.6.0.5: ID: 335505 The module also supports SafetyRelease 1.7 Starting with thisversion, the module also supports SafetyRelease 1.7 Channel description changed: No Configuration description changed: No Firmware changed: No ID: 335510 / Support ID: 400083263 unlock of SafeModule IDs >300 SafeModule IDs up to 1023 are now unlocked Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\46105_1.fw(295) Version 1.6.0.3: ID: 332250 The module also supports SafetyRelease 1.7 Starting with this version, the module also supports SafetyRelease 1.7 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\46105_1.fw(295) Version 1.6.0.2: ID: 328595 Correction for responsetimecalculator Correction of parameters used forthe calculation of the worstcase responsetime in Release 1.6 with the responsetimecalculator. Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 3\46105_1.fw(295) Version 1.6.0.1: ID: 314585 Adaption of module configuration file release 1.6 Adaption of module configuration file release 1.6 Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 3\46105_1.fw(295) Version 1.5.0.5: ID: 312420 added pindefinitions for EPLAN export added pindefinitions for EPLAN export Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\46105_1.fw(295) Version 1.5.0.4: ID: 303410 Support of AutomationStudio 4.0 Support of AutomationStudio 4.0 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\46105_1.fw(295) Version 1.5.0.0: ID: 293960 First Official Release First Official Release Channel description changed: No Configuration description changed: No Firmwarechanged: No Firmware: 3\46105_1.fw(295) |
|||||
| Verze | Jazyk | Operační systém | Datum | Velikost | Typ | Stáhnout |
| 2.2.0.0 | * | 21.07.2020 | 897 KB | EXE | AS4_HW_X20ST4492.exe | |
| Popis |
V4.6 HW Upgrade (X20ST4492) Revision information X20ST4492 Version 2.2.0.0: ID: 613330 / Support ID: 400263334 Changes in mappSafety firmware Bug was fixed with the firmware changes for mappSafety. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 668615 Adaptations for AutomationStudio 4.8 Channel description changed: No Configuration description changed: No Firmware changed: No ID: 688765 / Support ID: 400299371 Loss of safety connection Loss of safety connection, even though the parametrized "safe data duration" is longer than the network failure Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 689715 Propagation delay statistics The Propagation delay statistics can now be read out. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 689950 Improvement of the internal voltage monitoring. Improvement of the internal voltage monitoring. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 690095 New data sheet V2.06 For changes seechapter "Version history" in the data sheet. Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 10\46105_1.fw(571) Version 2.1.0.0: ID: 568660 / Support ID: 400247281 Documentation of test case sequence corrected Bug in documentation of test case sequence was corrected Channel description changed: No Configuration description changed: No Firmware changed: No ID: 644175 major (even incompatible) changes for mapp Safety First upgrade for mapp Safety. ATTENTION: existing applications mustbe adapted - see chapter "Switching to mapp Safety" in help! Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 10\46105_1.fw(570) Version 1.10.10.0: ID: 622665 Sporadic errors 114982, 102914, 120065, 110385 Sporadic errors 114982, 102914, 120065, 110385 have been fixed Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 3\46105_1.fw(295), 4\46105_1.fw(301), 5\46105_1.fw(302), 6\46105_1.fw(331) Version 1.10.9.1: ID: 643235 data sheet V1.141 See chapture "Version history" in the data sheet. i.a. calculation of Safety response time has been updated. Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\46105_1.fw(295), 4\46105_1.fw(301), 5\46105_1.fw(302), 6\46105_1.fw(330) Version 1.10.9.0: ID: 618285 logger entry 112174, 108078 Logger entry 112174, 108078 could happen sporadically with large projects. Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 3\46105_1.fw(295), 4\46105_1.fw(301), 5\46105_1.fw(302), 6\46105_1.fw(330) Version 1.10.1.5: ID: 585625 User configurable calculation of the input value during internal tests alsoin AS 3.x User configurable calculation of the input value during internal tests alsoin AS 3.x Channel description changed: Yes Configuration description changed: Yes Firmware changed: No ID: 585630 SafeThrSelector_0506_Bitx not working - Fix in AS 3.x The selection of the thresholds to use for channel 5 and 6 by SafeThrSelector_0506_Bitx is not working. Subsequently always the first thresholds are used. Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 3\46105_1.fw(295), 4\46105_1.fw(301), 5\46105_1.fw(302), 6\46105_1.fw(322) Version 1.10.1.1: ID: 533055 Add blackout mode Add blackout mode Channel description changed: No Configuration description changed: No Firmware changed: No ID: 533145 New channel for ConnectionValid New channel for ConnectionValid Channel description changed: No Configuration description changed: No Firmware changed: No ID: 533195 Update ECAD data Update ECAD data Channel description changed: No Configuration description changed: No Firmware changed: No ID: 536305 SafeThrSelector_0506_Bitx not working The selection of thethresholds to use for channel 5 and 6 by SafeThrSelector_0506_Bitx is not working. Subsequently always the first thresholds are used. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 539130 User configurable calculation of the input value during internal tests User configurable calculation of the input value during internal tests Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\46105_1.fw(295), 4\46105_1.fw(301), 5\46105_1.fw(302), 6\46105_1.fw(322) Version1.10.0.1: ID: 470650 changed manual verion to 1.100 changed manual verion to 1.100 Channel description changed: No Configuration description changed: No Firmware changed: No ID: 470655 Support of release 1.10 including openSAFETY 1.5 Support of release 1.10 including openSAFETY 1.5 with easier parametrization of timing parameters Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 3\46105_1.fw(295), 4\46105_1.fw(301), 5\46105_1.fw(302), 6\46105_1.fw(321) Version 1.9.0.0: ID: 404205 safety response time The safety response time is now depending onthe configured filter. Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 3\46105_1.fw(295), 4\46105_1.fw(301), 5\46105_1.fw(302) Version 1.7.0.1: ID: 388465 internal Adjustments internal Adjustments Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\46105_1.fw(295), 4\46105_1.fw(301) Version 1.7.0.0: ID: 372070 changed manual verion to 1.70 changed manual verion to 1.70 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\46105_1.fw(295), 4\46105_1.fw(301) Version 1.6.0.98: ID: 370680 / Support ID: 400107215 Violation of cycle time in PreOp with input filter 1ms Functions were rearranged in PreOp to comply with the cycle time for all filters. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 370690 The module also supports SafetyRelease 1.8 Starting with this version, the module also supports SafetyRelease 1.8. SafetyRelease 1.8 serves as basis for the backward compatibility Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 3\46105_1.fw(295), 4\46105_1.fw(301), 5\46105_1.fw(311) Version 1.6.0.7: ID: 339295 internal Adjustments internal Adjustments Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\46105_1.fw(295) Version 1.6.0.5: ID: 335505 The module also supports SafetyRelease 1.7 Starting with this version, the module also supports SafetyRelease 1.7 Channel description changed: No Configuration description changed: No Firmware changed: No ID: 335510 / Support ID: 400083263 unlock of SafeModule IDs > 300 SafeModule IDs up to 1023 are now unlocked Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\46105_1.fw(295) Version 1.6.0.3: ID: 332250 The module also supports SafetyRelease 1.7 Starting with this version, the module also supports SafetyRelease 1.7 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\46105_1.fw(295) Version 1.6.0.2: ID: 328595 Correction for responsetimecalculator Correction of parameters used for the calculation of the worstcase responsetime in Release 1.6 with the responsetimecalculator. Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 3\46105_1.fw(295) Version 1.6.0.1: ID: 314585 Adaption of module configuration file release 1.6 Adaption of module configuration file release 1.6 Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 3\46105_1.fw(295) Version 1.5.0.5: ID: 312420 added pindefinitions for EPLAN export added pindefinitions for EPLAN export Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\46105_1.fw(295) Version 1.5.0.4: ID: 303410 Support of AutomationStudio 4.0 Support of AutomationStudio 4.0 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\46105_1.fw(295) Version 1.5.0.0: ID: 293960 First Official Release First Official Release Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\46105_1.fw(295) |
|||||
| Verze | Jazyk | Operační systém | Datum | Velikost | Typ | Stáhnout |
| 2.1.0.0 | * | 05.07.2019 | 760 KB | EXE | AS4_HW_X20ST4492.exe | |
| Popis |
V4.6 HW Upgrade (X20ST4492) Revision information X20ST4492 Version 2.1.0.0: ID: 568660 / Support ID: 400247281 Documentation oftest case sequence corrected Bug in documentation of test case sequence was corrected Channel description changed: No Configuration description changed: No Firmware changed: No ID: 644175 major (evenincompatible) changes for mapp Safety First upgrade for mapp Safety. ATTENTION: existing applications must be adapted - see chapter "Switching to mapp Safety" in help! Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 10\46105_1.fw(570) Version 1.10.10.0: ID: 622665 Sporadic errors 114982, 102914, 120065, 110385 Sporadic errors 114982, 102914, 120065, 110385 have been fixed Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 3\46105_1.fw(295), 4\46105_1.fw(301), 5\46105_1.fw(302), 6\46105_1.fw(331) Version 1.10.9.1: ID: 643235 data sheet V1.141 See chapture "Version history" in the data sheet. i.a. calculation of Safety response time has beenupdated. Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\46105_1.fw(295), 4\46105_1.fw(301), 5\46105_1.fw(302), 6\46105_1.fw(330) Version 1.10.9.0: ID: 618285 logger entry 112174, 108078 Logger entry 112174, 108078 could happen sporadically with large projects. Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 3\46105_1.fw(295), 4\46105_1.fw(301), 5\46105_1.fw(302), 6\46105_1.fw(330) Version 1.10.1.5: ID: 585625 User configurable calculation of the input value during internal tests alsoin AS 3.x User configurable calculation of the input value during internal tests alsoinAS 3.x Channel description changed: Yes Configuration description changed: Yes Firmware changed: No ID: 585630 SafeThrSelector_0506_Bitx not working - Fix in AS 3.x The selection of the thresholds touse for channel 5 and 6 by SafeThrSelector_0506_Bitx is not working. Subsequently always the first thresholds are used. Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 3\46105_1.fw(295), 4\46105_1.fw(301), 5\46105_1.fw(302), 6\46105_1.fw(322) Version 1.10.1.1: ID: 533055 Add blackout mode Add blackout mode Channel description changed: No Configuration description changed: No Firmware changed: No ID: 533145 New channel for ConnectionValid New channel for ConnectionValid Channel description changed: No Configuration description changed: No Firmwarechanged: No ID: 533195 Update ECAD data Update ECAD data Channel description changed: No Configuration description changed: No Firmware changed: No ID: 536305 SafeThrSelector_0506_Bitx not working The selection of the thresholds to use for channel 5 and 6 bySafeThrSelector_0506_Bitx is not working. Subsequently always the first thresholds are used. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 539130 User configurable calculation of the input value during internal tests User configurable calculation of the input value during internal tests Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\46105_1.fw(295), 4\46105_1.fw(301), 5\46105_1.fw(302), 6\46105_1.fw(322) Version 1.10.0.1: ID: 470650 changed manual verion to 1.100 changed manual verion to 1.100 Channel description changed: No Configuration description changed: No Firmware changed: No ID: 470655 Support of release 1.10 including openSAFETY 1.5 Support of release 1.10 including openSAFETY 1.5 with easier parametrization of timing parameters Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 3\46105_1.fw(295), 4\46105_1.fw(301), 5\46105_1.fw(302), 6\46105_1.fw(321) Version 1.9.0.0: ID: 404205 safety response time The safety response time is now depending on the configured filter. Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 3\46105_1.fw(295), 4\46105_1.fw(301), 5\46105_1.fw(302) Version 1.7.0.1: ID: 388465 internal Adjustments internal Adjustments Channel description changed: No Configurationdescription changed: No Firmware changed: No Firmware: 3\46105_1.fw(295), 4\46105_1.fw(301) Version 1.7.0.0: ID: 372070 changed manual verion to 1.70 changed manual verion to 1.70 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\46105_1.fw(295), 4\46105_1.fw(301) Version 1.6.0.98: ID: 370680 / Support ID: 400107215 Violation of cycle time in PreOp with input filter 1ms Functions were rearranged in PreOp tocomply with the cycle time for all filters. Channel description changed:No Configuration description changed: No Firmware changed: Yes ID: 370690 The module also supports SafetyRelease 1.8 Starting with this version, the module also supports SafetyRelease 1.8. SafetyRelease 1.8 serves as basis for the backward compatibility Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 3\46105_1.fw(295), 4\46105_1.fw(301), 5\46105_1.fw(311) Version 1.6.0.7: ID: 339295 internal Adjustments internal Adjustments Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\46105_1.fw(295) Version 1.6.0.5: ID: 335505 The module also supports SafetyRelease 1.7 Starting with this version, the module also supports SafetyRelease 1.7 Channel description changed: No Configuration description changed: No Firmware changed: No ID: 335510 / Support ID: 400083263 unlock of SafeModule IDs > 300 SafeModule IDs up to 1023 are now unlocked Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\46105_1.fw(295) Version 1.6.0.3: ID: 332250 The module also supports SafetyRelease 1.7 Starting with this version, the module also supports SafetyRelease 1.7 Channel description changed: No Configuration description changed:No Firmware changed: No Firmware: 3\46105_1.fw(295) Version 1.6.0.2: ID: 328595 Correction for responsetimecalculator Correction of parameters used for the calculation of the worstcase responsetimein Release 1.6 with the responsetimecalculator. Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 3\46105_1.fw(295) Version 1.6.0.1: ID: 314585 Adaption of module configuration file release 1.6 Adaption of module configuration file release 1.6 Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 3\46105_1.fw(295) Version 1.5.0.5: ID: 312420 added pindefinitions for EPLAN export added pindefinitions for EPLAN export Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\46105_1.fw(295) Version 1.5.0.4: ID: 303410 Support of AutomationStudio 4.0 Support of AutomationStudio 4.0 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\46105_1.fw(295) Version 1.5.0.0: ID: 293960 First Official Release First Official Release Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\46105_1.fw(295) |
|||||
