DWL@DWL10000445873
| Verze | Jazyk | Operační systém | Datum | Velikost | Typ | Stáhnout |
|---|---|---|---|---|---|---|
| 2.0.1.0 | * | 15.06.2023 | 528 KB | EXE | AS4_HW_5AP5120.1505-000.exe | |
| Popis |
V4.2 HW Upgrade (5AP5120.1505-000) Revision information 5AP5120.1505-000 Version 2.0.1.0: ID: 770805 Configuration changes in case that the Panel is used as Panel PC in Terminal mode. Channel description changed: No Configuration description changed: Yes Firmware changed: No Version 2.0.0.0: ID: 667250 Extensions Hypervisorfrom AR A4.81 USB allocation between GPOS and RTOS also possible on the Automation Panel.This requires that the appropriate hardware upgrades are used for all components (APC/PPC, AP, SDLx Receiver, SDLx Transmitter). Starting with AS 4.8 following HWX upgrades (or newer) for AP5000 are recommended, mixed operation of the current and older HWX upgrades is not recommended: APC910 system unit: V2.1.0.0 5PC900.TS17-xx: V2.1.0.0 5AC901.LSD3-00: V2.0.0.0 5AC901.LSD4-00: V2.0.0.0 xPC2100 system unit: V2.1.0.0 xPC2200 system unit: V2.0.0.0 5ACCLI01.SDL0-000: V2.0.0.0 5ACCLI01.SDL3-000: V2.0.0.0 5ACCLI03.SDL4-000: V2.0.0.0 APC3100 system unit: V2.1.0.0 5ACCLI02.SD40-000: V2.0.0.0 AP5000 panels: V2.0.0.0 AP5000 extension unit: V2.0.0.0 5DLSDL.1001-00: V2.0.0.0 5DLSD3.1001-00: V2.0.0.0 5DLSD4.1001-00: V2.0.0.0 Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 667255 EPLAN Daten implemented Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 677785 Module supervision of the Automation Panels from AR A4.81 on the AutomationPC: The supervision at the usage as display unit of a Panel PC is activ from Automation Runtime version C4.34. The supervision at the usage as display unit of a Automation PC is activ from Automation Runtime version A4.81. In case of amissconfiguration or missing display unit the Panel PC/Automation PC is starting up in the service mode. This behavior can be configured via the configuration of the supervised option, the default is supervised = on. Channel description changed: No Configuration description changed: Yes Firmware changed: No Version 1.3.0.0: ID: 637895 Preparation to support the Panel PC 2200 Channel description changed: No Configuration description changed: Yes Firmware changed: No Version 1.2.0.0: ID: 575610 Preparation to support the SDL4 Receiver (5DLSD4.1001-00). Channel description changed: No Configuration description changed: Yes Firmwarechanged: No Version 1.1.0.0: ID: 552620 Bugfix for the module supervision The supervision of the 5AP1xxx.xxxx-xxx at the usage asdisplay unit of a Panel PC is activ from Automation Runtime version D4.34 on.In case of a missconfiguration of the display unit the Panel PC is starting up in the service mode. Channel description changed: No Configurationdescription changed: No Firmware changed: No ID: 552625 Check of station number and INA Node number in terminal mode The station number and the INA node number must be identical in terminal mode. If this is not the case, an error message is outputted by Automation Studio. Channel description changed: No Configuration description changed: No Firmware changed: No Version 1.0.0.0: ID: 491770 Support for 5AP5120.1505-000 The panel 5AP5120.1505-000 is supported beginning with Automation Studio 4.2.5.x. Channel description changed: Yes Configuration description changed: Yes Firmware changed: No |
|||||
| Verze | Jazyk | Operační systém | Datum | Velikost | Typ | Stáhnout |
| 2.0.0.0 | * | 08.04.2020 | 209 KB | EXE | AS4_HW_5AP5120.1505-000.exe | |
| Popis |
V4.2 HW Upgrade (5AP5120.1505-000) Revision information 5AP5120.1505-000 Version 2.0.0.0: ID: 667250 Extensions Hypervisor fromAR A4.81 USB allocation between GPOS and RTOS also possible on the Automation Panel.This requires that the appropriate hardware upgrades are used forall components (APC/PPC, AP, SDLx Receiver, SDLx Transmitter). Starting with AS 4.8 following HWX upgrades (or newer) for AP5000 are recommended, mixed operation of the current and older HWX upgrades is not recommended: APC910 system unit: V2.1.0.0 5PC900.TS17-xx: V2.1.0.0 5AC901.LSD3-00: V2.0.0.0 5AC901.LSD4-00: V2.0.0.0 xPC2100 system unit: V2.1.0.0 xPC2200 system unit: V2.0.0.0 5ACCLI01.SDL0-000: V2.0.0.0 5ACCLI01.SDL3-000: V2.0.0.0 5ACCLI03.SDL4-000: V2.0.0.0 APC3100 system unit: V2.1.0.0 5ACCLI02.SD40-000: V2.0.0.0 AP5000 panels: V2.0.0.0 AP5000 extension unit: V2.0.0.0 5DLSDL.1001-00: V2.0.0.0 5DLSD3.1001-00: V2.0.0.0 5DLSD4.1001-00: V2.0.0.0 Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 667255 EPLAN Daten implemented Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 677785 Module supervision of the Automation Panels from AR A4.81 on the AutomationPC: The supervision at the usage as display unit of a Panel PC is activ from Automation Runtime version C4.34. The supervision at the usage as display unit of a Automation PC is activ from Automation Runtime version A4.81. In case of amissconfiguration or missing display unit the Panel PC/Automation PC is starting up in the service mode.This behavior can be configured via the configuration of the supervised option, the default is supervised = on. Channel description changed: No Configuration description changed: Yes Firmware changed: No Version1.3.0.0: ID: 637895 Preparation to support the Panel PC 2200 Channel description changed: No Configuration description changed: Yes Firmware changed: No Version 1.2.0.0: ID: 575610 Preparation to support the SDL4 Receiver (5DLSD4.1001-00). Channel description changed: No Configuration description changed: Yes Firmware changed: No Version 1.1.0.0: ID: 552620 Bugfix for the modulesupervision The supervision of the 5AP1xxx.xxxx-xxx at the usage as display unit of a Panel PC is activ from Automation Runtime version D4.34 on. In case of a missconfiguration of the display unit the Panel PC is starting up in the service mode. Channel description changed: No Configuration description changed: No Firmware changed: No ID: 552625 Check of station number and INA Node number in terminal mode The station number and the INA node number must be identical in terminal mode. If this is not thecase, an error message is outputted by Automation Studio. Channel description changed: No Configuration description changed: No Firmware changed: No Version 1.0.0.0: ID: 491770 Support for 5AP5120.1505-000 The panel 5AP5120.1505-000 is supported beginning with Automation Studio 4.2.5.x. Channel description changed: Yes Configuration description changed: Yes Firmware changed: No |
|||||
| Verze | Jazyk | Operační systém | Datum | Velikost | Typ | Stáhnout |
| 1.3.0.0 | * | 16.07.2019 | 268 KB | EXE | AS4_HW_5AP5120.1505-000.exe | |
| Popis |
V4.2 HW Upgrade (5AP5120.1505-000) Revision information 5AP5120.1505-000 Version 1.3.0.0: ID: 637895 Preparation to support thePanel PC 2200 Channel description changed: No Configuration description changed: Yes Firmware changed: No Version 1.2.0.0: ID: 575610 Preparation to support the SDL4 Receiver (5DLSD4.1001-00). Channel description changed: No Configuration description changed: Yes Firmware changed: No Version 1.1.0.0: ID: 552620 Bugfix for the module supervision The supervision of the 5AP1xxx.xxxx-xxx at the usage as display unit of a Panel PC is activ from Automation Runtime version D4.34 on. In case of a missconfiguration of the display unit the Panel PC is starting up in the service mode. Channel description changed: No Configuration description changed: No Firmware changed: No ID: 552625 Check of station number and INA Node number in terminal mode The station number and the INA node number must be identical in terminal mode. If this is not the case, an error message is outputted by Automation Studio. Channel description changed: No Configuration description changed: No Firmware changed: No Version 1.0.0.0: ID: 491770 Support for 5AP5120.1505-000 The panel 5AP5120.1505-000 is supported beginning with Automation Studio 4.2.5.x. Channel description changed: Yes Configuration description changed: Yes Firmware changed: No |
|||||
| Verze | Jazyk | Operační systém | Datum | Velikost | Typ | Stáhnout |
| 1.2.0.0 | * | 06.02.2018 | 260 KB | EXE | AS4_HW_5AP5120.1505-000.exe | |
| Popis |
V4.2 HW Upgrade (5AP5120.1505-000) Revision information 5AP5120.1505-000 Version 1.2.0.0: ID: 575610 Preparation to support theSDL4 Receiver (5DLSD4.1001-00). Channel description changed: No Configuration description changed: Yes Firmware changed: No Version 1.1.0.0: ID: 552620 Bugfix for the module supervision The supervision of the 5AP1xxx.xxxx-xxx at the usage as display unit of a Panel PC is activ from Automation Runtime version D4.34 on. In case of a missconfiguration of the display unit the Panel PC is starting up in the service mode. Channel description changed: No Configuration description changed: No Firmware changed: No ID: 552625 Check of station number and INANode number in terminal mode The station number and the INA node number must be identical in terminal mode. If this is not the case, an error message is outputted by Automation Studio. Channel description changed: No Configuration description changed: No Firmware changed: No Version 1.0.0.0: ID: 491770 Support for 5AP5120.1505-000 The panel 5AP5120.1505-000 is supported beginning with Automation Studio 4.2.5.x. Channel description changed: Yes Configuration description changed: Yes Firmware changed: No |
|||||
