DWL@DWL10000377404
Verze | Jazyk | Operační systém | Datum | Velikost | Typ | Stáhnout |
---|---|---|---|---|---|---|
2.1.1.0 | * | 04.08.2023 | 531 KB | EXE | AS4_HW_5AP99D.185B-B62.exe | |
Popis |
V4.0 HW Upgrade (5AP99D.185B-B62) Revision information 5AP99D.185B-B62 Version 2.1.1.0: ID: 774000 Configuration changes in case that the Panel is used as Panel PC in Terminal mode. Channel description changed: No Configuration description changed: Yes Firmware changed: No Version 2.0.1.0: ID: 765085 / Support ID: 400397919 Bugfix error 7121 Missing configuration-enties in terminal-mode added Channel description changed: No Configuration description changed: Yes Firmware changed: No Version 2.0.0.1: ID: 719090 USB-malfunction on SDL4-operation Failure in USB-configuration has been fixed. Channel description changed: No Configuration description changed: Yes Firmware changed: No Version 2.0.0.0: ID: 707965 Extensions Extensions Hypervisor from AR A4.81: USB allocation between GPOS and RTOS also possible on the Automation Panel. This requires that the appropriate hardware upgrades are used for all components (APC/PPC, AP, SDLx Receiver, SDLx Transmitter). Starting with AS 4.8 following HWX upgrades(or newer) for AP1000 are recommended, mixed operation of the current and older HWX upgrades is not recommended: APC910 system unit: V2.1.0.0 5PC900.TS17-xx: V2.1.0.0 5AC901.LSD3-00: V2.0.0.0 5AC901.LSD4-00: V2.0.0.0 xPC2100 system unit: V2.1.0.0 xPC2200 system unit: V2.0.0.0 5ACCLI01.SDL0-000: V2.0.0.0 5ACCLI01.SDL3-000:V2.0.0.0 5ACCLI03.SDL4-000: V2.0.0.0 xPC3100 system unit: V2.1.0.0 5ACCLI02.SD40-000: V2.0.0.0 AP1000 panels: V2.0.0.0 5DLSDL.1001-00: V2.0.0.0 5DLSD3.1001-00: V2.0.0.0 5DLSD4.1001-00: V2.0.0.0 Module supervision of the Automation Panels from AR A4.81 on the Automation PC: The supervision at the usage as display unit of a Panel PC is activ from Automation Runtime version C4.34. The supervision at the usage as display unit of a Automation PC is activ from Automation Runtime version A4.81. In case of a missconfiguration or missing display unit the Panel PC/Automation PC is starting up in the service mode. This behavior can be configured via the configuration of the supervised option, the default is supervised = on. Channel description changed: No Configuration descriptionchanged: Yes Firmware changed: No Version 1.4.0.0: ID: 659990 Support Panel PC2200 Now also a PPC2200 can be used. Channel description changed: No Configuration description changed: Yes Firmware changed: No Version 1.3.0.0: ID: 552555 Bugfix for the module supervision The supervision of the 5AP9xx.xxxx-B62 at the usage as display unit of a Panel PC is activ from Automation Runtime version C4.34 on. In case of a missconfiguration of the display unit the Panel PC is starting up in the service mode. Channel description changed: No Configuration description changed: No Firmware changed: No ID: 552720 Check of station number and INA Node number in terminal mode The station number and the INA node number must be identical in terminal mode. If this is not the case, an error message is outputted by Automation Studio. Channel description changed: No Configuration description changed: No Firmware changed: No Version 1.1.0.0: ID: 507890 Support of optional keys - Now also optional keys T6-T9 can be used. - New datasheet V1.20 - Bugfix Parent mechanism from Version AR U4.06 (AS 4.0) AR H4.09 (AS 4.1) AR O4.10 (AS 4.1) AR D4.26 (AS 4.2) AR B4.33 (AS 4.3) Channel description changed: Yes Configuration description changed: Yes Firmware changed: No Version 1.0.0.0: ID: 437945 Support of AS 4 Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes |
|||||
Verze | Jazyk | Operační systém | Datum | Velikost | Typ | Stáhnout |
2.0.1.0 | * | 16.02.2023 | 531 KB | EXE | AS4_HW_5AP99D.185B-B62.exe | |
Popis |
V4.0 HW Upgrade (5AP99D.185B-B62) Revision information 5AP99D.185B-B62 Version 2.0.1.0: ID: 765085 / Support ID: 400397919 Bugfix error 7121 Missing configuration-enties in terminal-mode added Channel description changed: No Configuration description changed: Yes Firmware changed: No Version 2.0.0.1: ID: 719090 USB-malfunction on SDL4-operation Failure in USB-configuration has been fixed. Channel description changed: No Configuration description changed: Yes Firmware changed: No Version 2.0.0.0: ID: 707965 Extensions Extensions Hypervisor from AR A4.81: USB allocation between GPOS and RTOS also possible on the Automation Panel. This requires that the appropriate hardware upgrades are used for all components (APC/PPC, AP, SDLx Receiver, SDLx Transmitter). Starting with AS 4.8 following HWX upgrades (or newer) for AP1000 are recommended, mixed operation of the current and older HWX upgrades is not recommended: APC910 system unit: V2.1.0.0 5PC900.TS17-xx: V2.1.0.0 5AC901.LSD3-00: V2.0.0.0 5AC901.LSD4-00: V2.0.0.0 xPC2100 system unit: V2.1.0.0 xPC2200 system unit: V2.0.0.0 5ACCLI01.SDL0-000: V2.0.0.0 5ACCLI01.SDL3-000: V2.0.0.0 5ACCLI03.SDL4-000: V2.0.0.0 xPC3100 system unit: V2.1.0.0 5ACCLI02.SD40-000: V2.0.0.0 AP1000 panels: V2.0.0.0 5DLSDL.1001-00: V2.0.0.0 5DLSD3.1001-00: V2.0.0.0 5DLSD4.1001-00: V2.0.0.0 Module supervision of the Automation Panels from AR A4.81 on the Automation PC: The supervision at the usage as display unit of a Panel PC is activ from Automation Runtime version C4.34. The supervision at the usage as display unit of a Automation PC is activ from Automation Runtime version A4.81. In case of a missconfiguration or missing display unit the Panel PC/Automation PC is starting up in the service mode. This behavior can be configured via the configuration of the supervised option, the default is supervised = on. Channel description changed: No Configuration description changed: Yes Firmware changed: No Version 1.4.0.0: ID: 659990 Support Panel PC2200 Now also a PPC2200 can be used. Channel description changed: No Configuration description changed: Yes Firmware changed: No Version 1.3.0.0: ID: 552555 Bugfix for themodule supervision The supervision of the 5AP9xx.xxxx-B62 at the usage as display unit of a Panel PC is activ from Automation Runtime version C4.34 on. In case of a missconfiguration of the display unit the Panel PC is startingup in the service mode. Channel description changed: No Configuration description changed: No Firmware changed: No ID: 552720 Check of station number and INA Node number in terminal mode The station number and the INA node number must be identical in terminal mode. If this is not the case, an error message is outputted by Automation Studio. Channeldescription changed: No Configuration description changed: No Firmware changed: No Version 1.1.0.0: ID: 507890 Support of optional keys - Now also optional keys T6-T9 can be used. - New datasheet V1.20 - Bugfix Parent mechanism from Version AR U4.06 (AS 4.0) AR H4.09 (AS 4.1) AR O4.10 (AS 4.1) AR D4.26 (AS 4.2) AR B4.33 (AS 4.3) Channel description changed: Yes Configuration description changed: Yes Firmware changed: No Version 1.0.0.0: ID: 437945 Support of AS 4 Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes |
|||||
Verze | Jazyk | Operační systém | Datum | Velikost | Typ | Stáhnout |
2.0.0.1 | * | 04.03.2021 | 211 KB | EXE | AS4_HW_5AP99D.185B-B62.exe | |
Popis |
V4.0 HW Upgrade (5AP99D.185B-B62) Revision information 5AP99D.185B-B62.156B-B62 Version 2.0.0.1: ID: 719090 USB-malfunction on SDL4-operation Failure in USB-configuration has been fixed. Channel description changed: No Configuration description changed: Yes Firmware changed: No Version 2.0.0.0: ID: 707965 Extensions Extensions Hypervisor from AR A4.81: USB allocation between GPOS and RTOS also possible on the Automation Panel. This requires that the appropriate hardware upgrades are used for all components (APC/PPC, AP, SDLx Receiver, SDLx Transmitter). Starting with AS 4.8 following HWX upgrades (or newer) for AP1000 are recommended, mixed operation of the current and older HWX upgrades is not recommended: APC910 system unit: V2.1.0.0 5PC900.TS17-xx: V2.1.0.0 5AC901.LSD3-00: V2.0.0.0 5AC901.LSD4-00: V2.0.0.0 xPC2100 system unit: V2.1.0.0 xPC2200 system unit: V2.0.0.0 5ACCLI01.SDL0-000: V2.0.0.0 5ACCLI01.SDL3-000: V2.0.0.0 5ACCLI03.SDL4-000: V2.0.0.0 xPC3100 system unit: V2.1.0.0 5ACCLI02.SD40-000: V2.0.0.0 AP1000 panels: V2.0.0.0 5DLSDL.1001-00: V2.0.0.0 5DLSD3.1001-00: V2.0.0.0 5DLSD4.1001-00: V2.0.0.0 Module supervision of the Automation Panels from AR A4.81 on the Automation PC: The supervision at the usage as display unit of a Panel PC is activ from Automation Runtime version C4.34. The supervision at the usage as display unit of a Automation PC is activ from Automation Runtime version A4.81. Incase of a missconfiguration or missing display unit the Panel PC/Automation PC is startingup in the service mode. This behavior can be configured via the configurationof the supervised option, the default is supervised = on. Channel description changed: No Configuration description changed: Yes Firmware changed: No Version 1.4.0.0: ID: 659990 Support Panel PC2200 Now also a PPC2200 can be used. Channel description changed: No Configuration description changed: Yes Firmware changed: No Version 1.3.0.0: ID: 552555 Bugfix for the module supervision The supervision of the 5AP9xx.xxxx-B62 at the usage as display unit of a Panel PC is activ from Automation Runtime version C4.34 on. In case of a missconfiguration of the display unit the Panel PC is starting up in the service mode. Channel description changed: No Configuration description changed: No Firmware changed: No ID: 552720 Check of station number and INA Node number in terminal mode The station number and the INA node number must be identical in terminal mode. If this is not the case, an error message is outputted by Automation Studio. Channel descriptionchanged: No Configuration description changed: No Firmware changed:No Version 1.1.0.0: ID: 507890 Support of optional keys - Now also optional keys T6-T9 can be used. - New datasheet V1.20 -Bugfix Parent mechanism from Version AR U4.06 (AS 4.0) AR H4.09 (AS 4.1) AR O4.10 (AS 4.1) AR D4.26 (AS 4.2) AR B4.33 (AS 4.3) Channel description changed: Yes Configuration description changed: Yes Firmware changed: No Version 1.0.0.0: ID: 437945 Support of AS 4 Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes |
|||||
Verze | Jazyk | Operační systém | Datum | Velikost | Typ | Stáhnout |
2.0.0.0 | * | 09.11.2020 | 211 KB | EXE | AS4_HW_5AP99D.185B-B62.exe | |
Popis |
V4.0 HW Upgrade (5AP99D.185B-B62) Revision information 5AP93D.185B-B62 Version 2.0.0.0: ID: 707965 Extensions Extensions Hypervisor from AR A4.81: USB allocation between GPOS and RTOS also possibleon the Automation Panel. This requires that the appropriate hardware upgradesare used for all components (APC/PPC, AP, SDLx Receiver, SDLx Transmitter). Starting with AS 4.8 following HWX upgrades (or newer) for AP1000 are recommended, mixed operation of the current and older HWX upgrades is not recommended: APC910 system unit: V2.1.0.0 5PC900.TS17-xx: V2.1.0.0 5AC901.LSD3-00: V2.0.0.0 5AC901.LSD4-00: V2.0.0.0 xPC2100 system unit: V2.1.0.0 xPC2200 system unit: V2.0.0.0 5ACCLI01.SDL0-000:V2.0.0.0 5ACCLI01.SDL3-000: V2.0.0.0 5ACCLI03.SDL4-000: V2.0.0.0 xPC3100 system unit: V2.1.0.0 5ACCLI02.SD40-000: V2.0.0.0 AP1000 panels: V2.0.0.0 5DLSDL.1001-00: V2.0.0.0 5DLSD3.1001-00: V2.0.0.0 5DLSD4.1001-00: V2.0.0.0 Module supervision of the Automation Panels from AR A4.81 on the Automation PC: The supervision at the usage as display unit of a Panel PC is activ from Automation Runtime version C4.34. The supervision at the usage as display unit of a Automation PC is activ from Automation Runtime version A4.81. In case of a missconfiguration or missing display unit the Panel PC/Automation PC is starting up in the service mode. This behavior can be configured via the configuration of the supervised option, the default is supervised = on. Channel description changed: No Configuration description changed: Yes Firmware changed: No Version 1.4.0.0: ID: 659990 Support Panel PC2200 Now also a PPC2200 can be used. Channel description changed: No Configuration description changed: Yes Firmware changed: No Version 1.3.0.0: ID: 552555 Bugfix for the module supervision The supervision of the 5AP9xx.xxxx-B62 at the usage as display unit of a Panel PC is activ from Automation Runtime version C4.34 on. In case of a missconfiguration of the display unit the Panel PC is starting up in the service mode. Channel description changed: No Configuration description changed: No Firmware changed: No ID: 552720 Check of station number andINA Node number in terminal mode The station number and the INA node number must be identical in terminal mode. If this is not the case, an error message is outputted by Automation Studio. Channel description changed: No Configuration description changed: No Firmware changed: No Version 1.1.0.0: ID: 525485 Bugfix Parent mechanism from Version AR U4.06 (AS 4.0) AR H4.09 (AS 4.1) AR O4.10 (AS 4.1) AR D4.26 (AS 4.2) AR B4.33 (AS 4.3) - New datasheet V1.20 Channel description changed: No Configuration description changed: Yes Firmware changed: No Version 1.0.0.0: ID: 437935 Support of AS 4 Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes |
|||||
Verze | Jazyk | Operační systém | Datum | Velikost | Typ | Stáhnout |
1.4.0.0 | * | 27.01.2020 | 210 KB | EXE | AS4_HW_5AP99D.185B-B62.exe | |
Popis |
V4.0 HW Upgrade (5AP99D.185B-B62) Revision information 5AP93D.185B-B62 Version 1.4.0.0: ID: 659990 Support Panel PC2200 Now also a PPC2200 can be used. Channel description changed: No Configuration description changed: Yes Firmware changed: No Version 1.3.0.0: ID: 552555 Bugfix for the module supervision The supervision of the 5AP9xx.xxxx-B62 at the usage as display unit of a Panel PC is activ from Automation Runtime version C4.34 on. In case of a missconfiguration of the display unit the Panel PC is starting up in the service mode. Channel description changed: No Configuration description changed: No Firmware changed: No ID: 552720 Check of station number and INA Node number in terminal mode The station number and the INA node number must be identical in terminal mode. If this is not the case, an error message is outputted by Automation Studio. Channel description changed: No Configuration description changed: No Firmware changed: No Version 1.1.0.0: ID: 525485 Bugfix Parent mechanism from Version ARU4.06 (AS 4.0) AR H4.09 (AS 4.1) AR O4.10 (AS 4.1) AR D4.26 (AS 4.2) AR B4.33 (AS 4.3) - New datasheet V1.20 Channel description changed: No Configuration description changed: Yes Firmware changed: No Version 1.0.0.0: ID: 437935 Support of AS 4 Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes |
|||||
Verze | Jazyk | Operační systém | Datum | Velikost | Typ | Stáhnout |
1.3.0.0 | * | 01.09.2017 | 7 MB | EXE | AS4_HW_5AP99D.185B-B62.exe | |
Popis |
V4.0 HW Upgrade (5AP99D.185B-B62) Revision information 5AP93D.185B-B62 Version 1.3.0.0: ID: 552555 Bugfix for the module supervision The supervision of the 5AP9xx.xxxx-B62 at the usage as display unit of a Panel PC is activ from Automation Runtime version D4.34 on. In case of a missconfiguration of the display unit the Panel PC is starting up in the service mode. Channel description changed: No Configuration descriptionchanged: No Firmware changed: No ID: 552720 Check of station number and INA Node number in terminal mode The station number and theINA node number must be identical in terminal mode. If this is not the case, an error message is outputted by Automation Studio. Channel description changed: No Configuration description changed: No Firmware changed: No Version 1.1.0.0: ID: 525485 Bugfix Parent mechanism from Version AR U4.06 (AS 4.0) AR H4.09 (AS 4.1) AR O4.10 (AS 4.1) AR D4.26 (AS 4.2) AR B4.33 (AS 4.3) - New datasheet V1.20 Channel description changed: No Configuration description changed: Yes Firmware changed: No Version 1.0.0.0: ID: 437935 Supportof AS 4 Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes |