Inloggning

X20BC008U

Short description

Bus controller	OPC UA server

General information

B&R ID code	0xEAFB
Status indicators	Module status, bus function
Diagnostics
Module status	Yes, using LED status indicator and software
Bus function	Yes, using LED status indicator and software
Power consumption
Bus	2.5 W
Additional power dissipation caused by actuators (resistive) [W]	-
Certifications
CE	Yes
UKCA	Yes
ATEX	Zone 2, II 3G Ex nA nC IIA T5 Gc IP20, Ta (see X20 user's manual) FTZÚ 09 ATEX 0083X
UL	cULus E115267 Industrial control equipment
EAC	Yes

Interfaces

Fieldbus	OPC UA server
Variant	2x shielded RJ45 (switch)
Line length	Max. 100 m between 2 stations (segment length)
Transfer rate	100 Mbit/s
Transfer
Physical layer	100BASE-TX
Half-duplex	Yes
Full-duplex	Yes
Autonegotiation	Yes
Auto-MDI/MDIX	Yes
Min. cycle time
Fieldbus	10 ms
X2X Link	2 ms
Synchronization between bus systems possible	Yes

Electrical properties

Electrical isolation	OPC UA isolated from bus and I/O

Operating conditions

Mounting orientation
Horizontal	Yes
Vertical	Yes
Installation elevation above sea level
0 to 2000 m	No limitation
>2000 m	Reduction of ambient temperature by 0.5°C per 100 m
Degree of protection per EN 60529	IP20

Ambient conditions

Temperature
Operation
Horizontal mounting orientation	-25 to 60°C
Vertical mounting orientation	-25 to 50°C
Derating	-
Storage	-40 to 85°C
Transport	-40 to 85°C
Relative humidity
Operation	5 to 95%, non-condensing
Storage	5 to 95%, non-condensing
Transport	5 to 95%, non-condensing

Mechanical properties

Note	Order 1x terminal block X20TB12 separately. Order 1x power supply module X20PS9400 or X20PS9402 separately. Order 1x bus base X20BB80 separately.
Pitch	37.5^+0.2 mm

Materialnummer:

X20BC008U

Beskrivning:

Protocol: OPC UA
I/O configuration via OPC UA
10 ms minimum cycle time
Integrated switch for wiring multiple slaves
100 Mbit/s full-duplex mode
Up to 1440 bytes of input data and up to 1440 bytes of output data possible
Integrated web page for firmware updates
OPC UA diagnostics and module diagnostics at runtime via OPC UA clients

This bus controller provides OPC UA server functions. This allows any OPC UA clients access to read or write data from I/O modules connected to the bus controller.

Obligatoriska tillbehör

System modules for bus controllers

X20BB80	X20 bus base, for X20 base module (BC, HB, etc.) and X20 power supply module, X20 end cover plates (left and right) X20AC0SL1/X20AC0SR1 included
X20PS9400	X20 power supply module, for bus controller and internal I/O power supply X2X Link power supply
X20PS9402	X20 power supply module, for bus controller and internal I/O power supply, X2X Link supply, supply not galvanically isolated

Terminal blocks

X20TB12	X20 terminal block, 12-pin, 24 VDC keyed

Certifikat	Version (datum)	Ladda ner
E115267 UL CoC X20		PDF / 1 MB Inloggning för nedladdning
EU Declaration ATEX X20		PDF / 218 KB Inloggning för nedladdning
EU Declaration of conformity PLC X20		PDF / 169 KB Inloggning för nedladdning
UK Declaration PLC X20		PDF / 151 KB Inloggning för nedladdning

Dokumentation	Version (datum)	Ladda ner
Data sheet X20BC008U		PDF / 796 KB Inloggning för nedladdning
Installation- / EMC-Guide		PDF / 20 MB Inloggning för nedladdning
OPC UA Bus Controller User's manual		PDF / 9 MB Inloggning för nedladdning
X20 System User´s Manual		PDF / 7 MB Inloggning för nedladdning

E-CAD (Electro eller EPLAN mallar)	Version (datum)	Ladda ner
X20 EPLAN P8 from V2.4		EXE / 160 MB Inloggning för nedladdning

M-CAD (Mechan. mallar)	Version (datum)	Ladda ner
3D File STEP/DXF X20BC and X20IF Module		ZIP / 1 MB Inloggning för nedladdning

Mjukvaruuppdateringar	Version (datum)	Ladda ner
Firmwareupgrade X20BC008U		ZIP / 493 KB Inloggning för nedladdning