General information
Module type | ACOPOSmulti plug-in module |
B&R ID code | 0xA5CB |
Slot | Slots 1 and 2 |
Max. power consumption | 1.2 W |
Certifications | |
CE | Yes |
UKCA | Yes |
UL |
cULus E225616 Power conversion equipment |
KC | Yes |
Module connection
Module-side connection | 10-pin multipoint connector |
Status indicators | UP LED (module OK) and DN LED (module NOT OK) |
Analog inputs
Quantity | 4 |
Digital converter resolution | 14-bit |
Conversion time | <10 µs |
Variant | Differential input |
Electrical isolation | |
Input - ACOPOSmulti | Yes |
Input - Input | No |
Input signal | |
Nominal | -10 to +10 V |
Maximum | -15 to +15 V |
Operating modes | Cyclic measurement synchronous to 50 µs clock |
Conversion procedure | Successive approximation |
Input filter | Analog third-order low-pass filter / cutoff frequency: 30 kHz |
Common-mode rejection | |
DC | 80 dB |
50 Hz | 80 dB |
Nonlinearity | ±1 LSB |
Differential input impedance | >10 MΩ |
Ambient conditions
Temperature | |
Operation | |
Nominal | 5 to 40°C |
Maximum | 55°C |
Storage | -25 to 55°C |
Transport | -25 to 70°C |
Relative humidity | |
Operation | 5 to 85% |
Storage | 5 to 95% |
Transport | Max. 95% at 40°C |
Materialnummer:
8BAC0132.000-1Beskrivning:
- Analog input module for installation in ACOPOSmulti modules
- 4 high-speed analog inputs ±10 V
Obligatoriska tillbehör
Terminal blocks
8TB1110.20B-00 | 10-pin screw clamp terminal block, 1-row, pitch: 3.5 mm, numbered consecutively, coding B: 0011111100 |
8TB1110.21B-00 | Cage clamp terminal block 10-pin, one-row, pitch: 3.5 mm, coding B: 0011111100 |
Automation Studio HW uppdateringar | Version (datum) | Ladda ner |
---|---|---|
V4.0 HW Upgrade (8BAC0132.000-1) | EXE / 195 KB |
Dokumentation | Version (datum) | Ladda ner |
---|---|---|
ACOPOSmulti User´s Manual | PDF / 302 MB | |
Datasheet 8BAC0132.000-1 | PDF / 927 KB |
E-CAD (Electro eller EPLAN mallar) | Version (datum) | Ladda ner |
---|---|---|
ACOPOSmulti EPLAN P8 from V2.4 | EXE / 81 MB |