General information
| Certifications | |
| CE | Yes |
Motor
| Nominal speed nN [rpm] | 4960 |
| Number of pole pairs | 4 |
| Nominal torque Mn [Nm] | 0.088 |
| Nominal current IN [A] | 1.9 |
| Stall torque M0 [Nm] | 0.094 |
| Stall current I0 [A] | 2 |
| Maximum torque Mmax [Nm] | 0.25 |
| Maximum current Imax [A] | 5.6 |
| Maximum speed nmax [rpm] | 8000 |
| Torque constant KT [Nm/A] | 0.056 |
| Voltage constant KE [V/1000 rpm] | 3.55 |
| Stator resistance R2ph [Ω] | 1.3 |
| Stator inductance L2ph [mH] | 1.75 |
| Electrical time constant tel [ms] | 1.35 |
| Thermal time constant ttherm [min] | 6.7 |
| Moment of inertia J [kgcm2] | 0.0177 |
| Weight without brake m [kg] | 0.36 |
Gearbox
| Number of gear stages | 2 |
| Gear ratio i | 16 |
| Max. drive speed n1max [rpm] | 10000 |
| Max. backlash Jt [arcmin] | 35 |
| Torsional rigidity Ct21 [Nm/arcmin] | 0.3 |
| Efficiency at full load ŋ [%] | 90 |
| Weight m [kg] | 0.16 |
| Moment of inertia J1 [kgcm2] | 0.012 |
Recommendations
| ACOPOSmicro 80VD100Px.xxxx-01 | C03X, C033 |
Référence produit:
8WSB32.ee016jjQop0Description:
Synchronous motor 8WSB32 with direct gearbox mounting, SSI encoder, single-turn, gear ratio = 16, smooth shaft, IP54, nominal speed: 4960 rpm, fixed attachment cable 0.5 m with hybrid connector
Accessoires obligatoires
Accessories
| 8BCM00X5.1B48E-0 | 8WS/ACOPOSmicro hybrid motor cable, length 0.5 m, ((2x(2x26AWG) + 2x24AWG)C + 3x16AWG)C, 12+3-pin female series 915 hybrid connector, can be used in cable drag chains |
Accessoires optionnels
Accessories
| 8BCM0003.1B470-0 | 8WS hybrid motor cable extension, length 3 m, ((3x(2x26AWG)+(2x24AWG))C+3x26AWG+3x16AWG)C, 12+3-pin Itec hybrid motor connector, can be used in cable drag chains |
| 8BCM0005.1B470-0 | 8WS hybrid motor cable extension, length 5 m, ((3x(2x26AWG)+(2x24AWG))C+3x26AWG+3x16AWG)C, 12+3-pin Itec hybrid motor connector, can be used in cable drag chains |
| 8BCM0010.1B470-0 | 8WS hybrid motor cable extension, length 10 m, ((3x(2x26AWG)+(2x24AWG))C+3x26AWG+3x16AWG)C, 12+3-pin Itec hybrid motor connector, can be used in cable drag chains |
| 8BCM0015.1B470-0 | 8WS hybrid motor cable extension, length 15 m, ((3x(2x26AWG)+(2x24AWG))C+3x26AWG+3x16AWG)C, 12+3-pin Itec hybrid motor connector, can be used in cable drag chains |
| Certifications | Version (date) | Téléchargement |
|---|---|---|
| E360421 UL Certificate of Compliance 8WS | PDF / 243 KB | |
| EU Declaration Motors 8WS | ZIP / 175 KB | |
| UK Declaration Motors 8WS | ZIP / 158 KB |
| DT Upgrade | Version (date) | Téléchargement |
|---|---|---|
| V4.0 DT Upgrade (8WSB32.F0016S0QKB0) | EXE / 298 KB |
| Documentation | Version (date) | Téléchargement |
|---|---|---|
| 8WS user's manual | PDF / 3 MB |