General information
Cable construction
Connector
Type | 8-pin female speedtec motor connector, size 1.5 |
Mating cycles | <500 |
Contacts | 8 (4 power and 4 signal contacts) |
Degree of protection per EN 60529 | IP66/67 when connected |
Electrical properties
Operating voltage | Max. 1000 VAC (UL) |
Test voltage | |
Wire - Wire | 4 kV |
Wire - Shield | 4 kV |
Conductor resistance | |
Power lines | ≤2 Ω/km |
Signal line | 0.75 mm²: ≤26.7 Ω/km, 1.5 mm²: ≤13.7 Ω/km |
Insulation resistance | ≥500 MΩ*km |
Current-carrying capacity per DIN VDE 0298 part 4, table 11 | |
Wall mounting | 64.6 A |
Installed in conduit or cable duct | 54.6 A |
Installed in cable tray | 68.3 A |
Référence produit:
8BCM0015.1525B-0Description:
- Can be used in cable drag chains
- Assembled specifically for use with ACOPOSmulti drive systems and B&R servo motors with motor connector size 1.5
- Pre-assembled power line connections on the servo side with M8 ring terminal ends
- speedtec - Innovative connector system for secure connections
- Integrated shield plate
A shield plate is attached to ACOPOSmulti 8BCM motor cables. If this shield plate is correctly installed on the respective ACOPOSmulti 8BVI inverter module, no additional shielding measures are necessary.
Certifications | Version (date) | Téléchargement |
---|---|---|
E225616 UL Certificate of Compliance ACOPOSmulti (UL 508C) | PDF / 282 Ko | |
EU Declaration Servos ACOPOSmulti | PDF / 219 Ko | |
UK Declaration ACOPOSmicro | PDF / 109 Ko | |
UK Declaration Servos ACOPOSmulti | PDF / 109 Ko |
Documentation | Version (date) | Téléchargement |
---|---|---|
Datasheet 8BCM0015.1525B-0 | PDF / 246 Ko |