8AC122.60-3

General information
Module type ACOPOS plug-in module
B&R ID code 0xA48B
Slot Slots 2, 3 and 4
Max. cable length 100 m
Power consumption Max. 2.5 W
Certifications
CE Yes
UKCA Yes
UL cULus E225616
Power conversion equipment
KC Yes
Resolver inputs
Reference output
Output current Max. 50 mAeff
Differential voltage Typ. 3.4 Veff
Frequency 10 kHz
Signal transmission Differential signals
Angular position resolution 14 bits/rev
Module-side connection 9-pin female DSUB
Status indicators UP/DN LEDs
Bandwidth 2.5 kHz
Encoder monitoring Yes
Accuracy ±8 angular minutes
Electrical isolation
Resolver - ACOPOS No
Resolver
Input frequency 10 kHz
Input voltage 3 to 7 Vrms
Number of pins 2-pin
Type BRX
Max. phase shift ±45°
Max. elec. angular error ±10 angular minutes
Nominal transformation ratio 0.5 ±10%
Sine/Cosine inputs
Input impedance at 10 kHz (per pin) 10.4 kΩ - j 11.1 kΩ
Signal transmission Differential signals
Encoder-ACOPOS electrical isolation No, common-mode voltage on the sine/cosine inputs max. ±20 V
Ambient conditions
Temperature
Operation
Nominal 5 to 40°C
Maximum 55°C
Storage -25 to 55°C
Transport -25 to 70°C
Relative humidity
Operation 5 to 85%
Storage 5 to 95%
Transport Max. 95% at 40°C
Référence produit:
8AC122.60-3
Description:
  • Resolver interface for installation in ACOPOS servo drives
  • Monitors encoder input signals
  • Resolver type BRX
ACOPOS plug-in module, resolver interface 10 kHz
Accessoires optionnels
Resolver cables
8CR005.12-1 Resolver cable, length 5 m, 3x 2x 24 AWG (19x 0.127), 12-pin female Intercontec resolver connector, 9-pin male DSUB servo connector, can be used in cable drag chains
8CR007.12-1 Resolver cable, length 7 m, 3x 2x 24 AWG (19x 0.127), 12-pin female Intercontec resolver connector, 9-pin male DSUB servo connector, can be used in cable drag chains
8CR010.12-1 Resolver cable, length 10 m, 3x 2x 24 AWG (19x 0.127), 12-pin female Intercontec resolver connector, 9-pin male DSUB servo connector, can be used in cable drag chains
8CR015.12-1 Resolver cable, length 15 m, 3x 2x 24 AWG (19x 0.127), 12-pin female Intercontec resolver connector, 9-pin male DSUB servo connector, can be used in cable drag chains
8CR020.12-1 Resolver cable, length 20 m, 3x 2x 24 AWG (19x 0.127), 12-pin female Intercontec resolver connector, 9-pin male DSUB servo connector, can be used in cable drag chains
8CR025.12-1 Resolver cable, length 25 m, 3x 2x 24 AWG (19x 0.127), 12-pin female Intercontec resolver connector, 9-pin male DSUB servo connector, can be used in cable drag chains
Automation Studio HW Upgrades Version (date) Téléchargement
V2.7 HW Upgrade (8AC122.60-3) EXE / 400 Ko
V3.0 HW Upgrade (8AC122.60-3) EXE / 399 Ko
V3.0 HW Upgrade (8AC122.60-3) EXE / 402 Ko
V4.0 HW Upgrade (8AC122.60-3) EXE / 195 Ko
Certifications Version (date) Téléchargement
ACOPOS KC certificates ZIP / 601 Ko
E225616 UL Certificate of Compliance ACOPOS PDF / 242 Ko
EU Declaration Servos ACOPOS PDF / 609 Ko
UK Declaration Servos ACOPOS PDF / 109 Ko
Documentation Version (date) Téléchargement
ACOPOS User´s Manual PDF / 49 Mo
Datasheet 8AC122.60-3 PDF / 932 Ko
E-CAD (modèles Electro ou EPLAN) Version (date) Téléchargement
ACOPOS EPLAN P8 from V2.4 EXE / 23 Mo
M-CAD (modèles mécaniques) Version (date) Téléchargement
3D file STEP 8AC122.60-x ZIP / 116 Ko

Veuillez sélectionner un pays et une langue

B&R Logo