5ACCIFM0.FPC3-000

General information
B&R ID code 0x28A3
Temperature sensor Max. specified 90°C
Certifications
CE Yes
UKCA Yes
Controller
FRAM
Size 64 kB
Data retention 10 years
Read/Write endurance Min. 1013 times/byte
Remanent variables in power failure mode 32 kB (for e.g. Automation Runtime, see Automation Help)
Interfaces
POWERLINK
Quantity 1
Type Type 4
Variant M12, 4-pin, D-coded
Transfer rate 100 Mbit/s
Transfer 100BASE-TX
Line length Max. 100 m between two stations (segment length)
CAN
Quantity 3
Variant M12, 5-pin, A-coded, galvanically isolated
Transfer rate Max. 1 Mbit/s
Terminating resistor
Type Can be switched on and off with software
Default setting Off
Electrical properties
Power consumption Max. 1.7 W
Operating conditions
Pollution degree per EN 61131-2 Pollution degree 2
Degree of protection per EN 60529 IP69K
Ambient conditions
Temperature
Operation -40 to 70°C, condensing
Storage -40 to 85°C, condensing
Transport -40 to 85°C, condensing
Mechanical properties
Weight Approx. 100 g
Materiaalnummer:
5ACCIFM0.FPC3-000
Omschrijving:
  • 1x POWERLINK interface managing or controlled node
  • 3x CAN bus master interface
  • 64 kB FRAM
  • Compatible with Automation PC 3100 mobile
Expansion option - 1x POWERLINK interface - 3x CAN interface - 64 kB FRAM - For APC mobile - Only available with a new device
Automation Studio HW Upgrades Versie (Datum) Download
V4.11 HW Upgrade (5ACCIFM0.FPC3-000) EXE / 774 KB
Documentatie Versie (Datum) Download
Automation PC 3100 mobile device number key PDF / 126 KB
Automation PC 3100 mobile user's manual PDF / 10 MB

Graag land en taal kiezen

B&R Logo