8BVI0055HWS0.000-3

General information

B&R ID code	0x2F54
System requirements
Automation Studio	4.6.1.x or later
Cooling and mounting type	Wall mounting
Slots for plug-in modules	2
Certifications
CE	Yes
UKCA	Yes
Functional safety	Yes
UL	cULus E225616 Power conversion equipment
KC	Yes

DC bus connection

Voltage
Nominal	750 VDC
Continuous power consumption	5.6 kW
Power dissipation depending on switching frequency
Switching frequency 5 kHz	[0.6 * I_M² + 1.3 * I_M + 60] W
Switching frequency 10 kHz	[0.97 * I_M² + 0.5 * I_M + 110] W
Switching frequency 20 kHz	[1.7 * I_M² - 0.7 * I_M + 225] W
DC bus capacitance	165 µF
Variant	ACOPOSmulti backplane

24 VDC power supply

Input voltage	25 VDC ±1.6%
Input capacitance	23.5 µF
Max. power consumption	12 W + P_SLOT1 + P_SLOT2 + P_{24 V Out} + P_HoldingBrake
Variant	ACOPOSmulti backplane

24 VDC output

Quantity	2
Output voltage
DC bus voltage (U_DC): 260 to 315 VDC	25 VDC * (U_DC/315)
DC bus voltage (U_DC): 315 to 800 VDC	24 VDC ±6%
Fuse protection	250 mA (slow-blow) electronic, automatic reset

Motor connection

Quantity	1
Continuous power per motor connection	5.5 kW
Continuous current per motor connection	7.6 A_eff
Reduction of continuous current depending on switching frequency
Switching frequency 5 kHz	No reduction
Switching frequency 10 kHz	0.2 A/K (starting at 49°C)
Switching frequency 20 kHz	0.13 A/K (starting at 4°C)
Reduction of continuous current depending on installation elevation
Starting at 500 m above sea level	0.76 A_eff per 1000 m
Peak current	18.9 A_eff
Nominal switching frequency	5 kHz
Possible switching frequencies	5 / 10 / 20 kHz
Insulation stress of the connected motor per IEC TS 60034-25:2004	Limit value curve A
Protective measures
Overload protection	Yes
Short-circuit and ground fault protection	Yes
Max. output frequency	598 Hz
Variant
U, V, W, PE	Connector
Shield connection	Yes
Terminal connection cross section
Flexible and fine-stranded wires
With wire end sleeve	0.25 to 6 mm²
Approbation data
UL/C-UL-US	30 to 10 AWG
CSA	28 to 10 AWG
Terminal cable cross section dimension of shield connection	12 to 22 mm
Max. motor line length depending on switching frequency
Switching frequency 5 kHz	25 m
Switching frequency 10 kHz	25 m
Switching frequency 20 kHz	10 m

Motor holding brake connection

Quantity	1
Output voltage	24 VDC +5.8% / -0%
Continuous current per connection	1.1 A
Max. internal resistance	0.5 Ω
Extinction potential	Approx. 30 V
Max. extinction energy per switching operation	1.5 Ws
Max. switching frequency	0.5 Hz
Protective measures
Overload and short-circuit protection	Yes
Open-circuit monitoring	Yes
Undervoltage monitoring	Yes
Response threshold for open-circuit monitoring	Approx. 0.25 A
Response threshold for undervoltage monitoring	24 VDC +0% / -4%

Enable inputs

Quantity	2
Circuit	Sink
Electrical isolation
Input - Inverter module	Yes
Input - Input	Yes
Input voltage
Nominal	24 VDC
Maximum	30 VDC
Input current at nominal voltage	Approx. 30 mA
Switching threshold
Low	<5 V
High	>15 V
Switching delay at nominal input voltage
Enable 1 → 0, PWM off	Max. 20.5 ms
Enable 0 → 1, ready for PWM	Max. 100 µs
Modulation compared to ground potential	Max. ±38 V
OSSD signal connections	Permitted Max. test pulse length: 500 µs

Trigger inputs

Quantity	2
Circuit	Sink
Electrical isolation
Input - Inverter module	Yes
Input - Input	Yes
Input voltage
Nominal	24 VDC
Maximum	30 VDC
Switching threshold
Low	<5 V
High	>15 V
Input current at nominal voltage	Approx. 10 mA
Switching delay
Rising edge	52 µs ±0.5 µs (digitally filtered)
Falling edge	53 µs ±0.5 µs (digitally filtered)
Modulation compared to ground potential	Max. ±38 V

Temperature sensor connection

Quantity	1
Resistance range	500 Ω to 5 kΩ

Support

Motion system
mapp Motion	5.24.1 and higher
ACP10/ARNC0	5.24.1 and higher

Electrical properties

Discharge capacitance	0.14 µF
Energy efficiency (IE classification)
Power dissipation relative to continuous apparent power	IE2 (10,25) 2.5% IE2 (50,25) 2.5% IE2 (10,50) 2.7% IE2 (50,50) 2.7% IE2 (90,50) 2.7% IE2 (10,100) 3.2% IE2 (50,100) 3.2% IE2 (90,100) 3.2%
Nominal losses in standby mode	8.5 W

Operating conditions

Permissible mounting orientations
Hanging vertically	Yes
Horizontal, face up	Yes
Standing horizontally	No
Installation elevation above sea level
Nominal	0 to 500 m
Maximum	4000 m
Pollution degree per EN 61800-5-1	2 (non-conductive pollution)
Overvoltage category per EN 61800-5-1	III
Degree of protection per EN 60529	IP20

Ambient conditions

Temperature
Operation
Nominal	5 to 40°C
Maximum	55°C
Storage	-25 to 55°C
Transport	-25 to 70°C
Relative humidity
Operation	5 to 85%
Storage	5 to 95%
Transport	Max. 95% at 40°C

Mechanical properties

Dimensions
Width	53 mm
Height	317 mm
Depth
Wall mounting	263 mm
Weight	Approx. 2.7 kg
Module width	1

Référence produit:

8BVI0055HWS0.000-3

Description:

ACOPOSmulti3 inverter module, 7.6 A, AS, wall mounting, optimized for applications with decentralized, computationally intensive open-loop and closed-loop control requirements

Accessoires obligatoires

Terminal block sets

8BZVI0055S0.000-1A	Jeu de borniers à vis pour modules ACOPOSmulti 8BVI00xxHxS0 : 1x 8TB3104.204G-11, 1x 8TB2104.203L-00, 1x 8TB2106.2010-00, 1x 8TB2108.2010-00

Accessoires optionnels

Accessory sets

8BXB000.0000-00	Kit d'accessoires ACOPOSmulti pour la mise en mémoire tampon de l'encodeur, composé de : 1x pile AA 3,6 V, 1x couvercle de protection pour le support de pile

Fan modules

8BXF001.0000-00	Module de ventilation ACOPOSmulti, ventilateur de remplacement pour les modules ACOPOSmulti (8BxP/8B0C/8BVI/8BVE/8B0K)

POWERLINK/Ethernet cables

X20CA0E61.00020	Câble de connexion POWERLINK/Ethernet, RJ45 à RJ45, 0,2 m
X20CA0E61.00025	POWERLINK/Ethernet connection cable, RJ45 to RJ45, 0.25 m
X20CA0E61.00030	POWERLINK/Ethernet connection cable, RJ45 to RJ45, 0.3 m
X20CA0E61.00035	POWERLINK/Ethernet connection cable, RJ45 to RJ45, 0.35 m
X20CA0E61.00050	Câble de connexion POWERLINK/Ethernet, RJ45 à RJ45, 0,5 m
X20CA0E61.00100	Câble de connexion POWERLINK/Ethernet, RJ45 à RJ45, 1 m

Plug-in modules

8BAC0120.000-1	Module enfichable ACOPOSmulti, Interface EnDat 2.1
8BAC0120.001-2	Module enfichable ACOPOSmulti, Interface EnDat 2.2
8BAC0121.000-1	Module d'extension ACOPOSmulti, Interface HIPERFACE
8BAC0122.000-1	Module enfichable ACOPOSmulti, interface résolveur 10 kHz
8BAC0123.000-1	Module enfichable ACOPOSmulti, codeur incrémental et interface codeur absolu SSI pour signaux RS422
8BAC0123.001-1	Module enfichable ACOPOSmulti, interface codeur incrémental pour 5 V asymétrique et 5 V différentiels
8BAC0123.002-1	Module enfichable ACOPOSmulti, interface codeur incrémental pour 24 V single-ended et 24 V différentiels
8BAC0124.000-1	Module d'extension ACOPOSmulti, Interface SinCos
8BAC0125.000-1	Module enfichable ACOPOSmulti, Interface SinCos EnDat 2.1/SSI/BiSS
8BAC0130.000-1	Module enfichable ACOPOSmulti, 2 sorties numériques, 50 mA, max. 62,5 kHz, 2 sorties numériques, 500 mA, max. 1,25 kHz, 2 entrées numériques 24 VDC
8BAC0130.001-1	Module enfichable ACOPOSmulti, 2 sorties numériques, 50 mA, max. 62,5 kHz, 4 sorties numériques, 500 mA, max 1,25 kHz
8BAC0132.000-1	Module enfichable ACOPOSmulti, 4 entrées analogiques ±10 V
8BAC0133.000-1	Module enfichable ACOPOSmulti, 3 sorties RS422 pour l'émulation de l'encodeur ABR, 1 MHz

Shield component sets

8SCS000.0000-00	Kit de composants pour bouclier ACOPOSmulti : 1x plaque de blindage 1x type 0, 1x collier de serrage, B 9 mm, D 12-22 mm
8SCS002.0000-00	Kit de composants pour bouclier ACOPOSmulti : 1x plaque de serrage, 2x pince D 4-13.5 mm, 2x vis
8SCS005.0000-00	Jeu de composants pour bouclier ACOPOSmulti : 1x couvercle de fente / plaque de blindage
8SCS009.0000-00	Kit de composants de blindage ACOPOSmulti : 1x plaque de maintien ACOPOSmulti SK8-14, 1x pince de connexion de blindage SK14

Terminal blocks

8TB2104.203L-00	Bornier à vis à 4 broches, 1 rangée, pas : 5,08 mm, étiquette 3 : T- T+ B- B+, codage L : 1010
8TB2106.2010-00	Bornier à vis à 6 broches, 1 rangée, pas : 5,08 mm, étiquette 1 : numérotée consécutivement
8TB2108.2010-00	Bornier à vis à 8 broches, 1 rangée, pas : 5,08 mm, étiquette 1 : numérotée consécutivement
8TB3104.204G-11	Bornier à vis à 4 broches, 1 rangée, pas : 7,62 mm, étiquette 4 : PE W V U, codage G : 0110

Automation Studio HW Upgrades	Version (date)	Téléchargement
V4.6 HW Upgrade (8BVI0055HWS0.000-3)		EXE / 583 Ko Identification pour téléchargement
V4.6 HW Upgrade (8BVIxxxxxxSx.xxx-3)		EXE / 582 Ko Identification pour téléchargement
V4.6 HW Upgrade (8BVIxxxxxxSx.xxx-3)		EXE / 582 Ko Identification pour téléchargement
V6.0 HW Upgrade (8BVI0055HWS0.000-3)		EXE / 583 Ko Identification pour téléchargement
V6.0 HW Upgrade (8BVIxxxxxxSx.xxx-3)		EXE / 582 Ko Identification pour téléchargement

Certifications	Version (date)	Téléchargement
E225616 UL Certificate of Compliance ACOPOSmulti (UL 508C)		PDF / 282 Ko Identification pour téléchargement
E225616 UL Certificate of Compliance ACOPOSmulti (UL 61800-5-1)		PDF / 183 Ko Identification pour téléchargement
TÜV-certificate - function "Safe Pulse Disabling" for ACOPOSmulti		ZIP / 1 Mo Identification pour téléchargement

Documentation	Version (date)	Téléchargement
Datasheet 8BVI0055HWS0.000-3		PDF / 2 Mo Identification pour téléchargement

M-CAD (modèles mécaniques)	Version (date)	Téléchargement
3D file STEP 8BVI0055HWS0.000-3		ZIP / 147 Ko Identification pour téléchargement