5PPC2100.BY01-000

General information
LEDs Power, CFast, Link, Run
B&R ID code 0xE522
Cooling Passive via housing
Power button Yes
Reset button Yes
Buzzer No
Certifications
CE Yes
UKCA Yes
CRA (Cyber Resilience Act) In preparation
UL cULus E115267
Industrial control equipment
HazLoc cULus HazLoc E180196
Industrial control equipment
for hazardous locations
Class I, Division 2, Groups ABCD, T4
Controller
Bootloader UEFI BIOS
Processor
Type Intel Atom E3815
Clock frequency 1460 MHz
Total number of cores 1
Architecture 22 nm
Thermal design power (TDP) 5 W
L2 cache 512 kB
Intel 64 architecture Yes
Intel Hyper-Threading Technology No
Intel vPro Technology No
Intel Virtualization Technology (VT-x) Yes
Intel Virtualization Technology for Directed I/O (VT-d) No
Enhanced Intel SpeedStep Technology Yes
Chipset Intel Bay Trail
Real-time clock
Accuracy At 25°C: Typ. 12 ppm (1 second) per day
Retention time Typ. approx. 400 h
Min. approx. 200 h
Battery-backed No
Power failure logic
Controller MTCX
Buffer time 10 ms
Memory
Type DDR3 SDRAM
Memory size 1 GB
Velocity DDR3L-1067
Memory interface width Single channel
Removable No
Graphics
Controller Intel HD Graphics
Max. dynamic graphics frequency 400 MHz
Color depth Max. 32-bit
DirectX support 11
OpenGL support 4.0
Power management ACPI 4.0
Interfaces
CFast slot
Quantity 1
Type SATA II (SATA 3.0 Gbit/s)
USB
Quantity 2
Type 1x USB 3.0
1x USB 2.0
Variant Type A
Transfer rate Low speed (1.5 Mbit/s), full speed (12 Mbit/s), high speed (480 Mbit/s) to SuperSpeed (5 Gbit/s)
Current-carrying capacity Max. 1 A per connection
Ethernet
Quantity 2
Variant RJ45, shielded
Transfer rate 10/100/1000 Mbit/s
Max. baud rate 1 Gbit/s
Slots
Interface option 1
Support
Software
Automation Studio Up to V4.12
Electrical properties
Nominal voltage 24 VDC ±25%
Nominal current 3.5 A
Inrush current Typ. 6 A, max. 10 A for < 300 μs
Overvoltage category per EN 61131-2 II
Galvanic isolation Yes
Operating conditions
Pollution degree per EN 61131-2 Pollution degree 2
Degree of protection per EN 60529 Back: IP20 (front: depends on the panel used)
Ambient conditions
Elevation
Operation Max. 3000 m (component-dependent)
Mechanical properties
Dimensions
Width 190 mm
Height 115 mm
Depth 29.7 mm
Weight 577 g
Número de material:
5PPC2100.BY01-000
Descripción:
  • Intel Atom E3815 processor
  • Intel Bay Trail platform
  • Intel HD graphics
  • 1 GB DDR3 memory
  • 1 CFast slot
  • Insert for 1 interface option
PPC2100 system unit - Intel Atom E3815 1.46 GHz - Single core - 1 GB SDRAM - For Automation Panel 923/933/1000
Accesorios obligatorios
CFast cards
5CFAST.016G-00 CFast 16 GB SLC
5CFAST.032G-00 CFast 32 GB SLC
5CFAST.032G-10 CFast 32 GB MLC
5CFAST.064G-10 CFast 64 GB MLC
5CFAST.128G-10 CFast 128 GB MLC
5CFAST.256G-10 CFast 256 GB MLC
Accesorios opcionales
Interface options
5ACCIF01.FPCC-000 Interface card - 2x CAN interfaces - 1x X2X Link interface - 1x POWERLINK interface - 512 kB nvSRAM - For APC2x00/PPC2x00 - Only available with a new device
5ACCIF01.FPLK-000 Interface card - 1x POWERLINK interface - Integrated 2-port hub - 512 kB nvSRAM - For APC2x00/PPC2x00 - Only available with a new device
5ACCIF01.FPLS-000 Interface card - 1x RS232 interface - 1x POWERLINK interface - 32 kB FRAM - For APC2x00/PPC2x00 - Only available with a new device
5ACCIF01.FPLS-001 Interface card - 1x RS232 interface - 1x POWERLINK interface - 512 kB nvSRAM - For APC2x00/PPC2x00 - Only available with a new device
5ACCIF01.FPSC-000 Interface card - 1x RS232 interface - 1x CAN interface - 1x POWERLINK interface - 32 kB FRAM - For APC2x00/PPC2x00 - Only available with a new device
5ACCIF01.FPSC-001 Interface card - 1x RS232 interface - 1x CAN interface - 1x X2X Link Interface - 1x POWERLINK interface - 512 kB nvSRAM - For APC2x00/PPC2x00 - Only available with a new device
5ACCIF01.ICAN-000 Interface card - 1x CAN interface - For APC2100/PPC2100/APC2200/PPC2200 - Only available with a new device
5ACCIF01.IS00-000 Interface card - 1x RS232 interface - For APC2x00/PPC2x00 - Only available with a new device
Actualizaciones de firmware Versión (fecha) Descargar
PPC2100 Firmware Upgrade (MTCX) ZIP / 4 MB
Actualizaciones de hardware de Automation Studio Versión (fecha) Descargar
V4.0 HW Upgrade (5PPC2100.BY01-000) EXE / 491 KB
V4.1 HW Upgrade (5PPC2100.BY01-000) EXE / 471 KB
BIOS Versión (fecha) Descargar
BIOS Upgrade Bay Trail ZIP / 4 MB
Documentación Versión (fecha) Descargar
ADI driver User's Manual (Win10 2016 64-bit) PDF / 358 KB
Data sheet 5ACCIF01.ICAN-C01 PDF / 194 KB
HMI Service Center User's manual PDF / 605 KB
Industrial PCs Benchmark Automation Runtime User's manual PDF / 4 MB
Panel PC 2100 Built-in devices User's manual PDF / 40 MB
Driver Versión (fecha) Descargar
ADI driver universal (Win10 2016 64-bit) ZIP / 4 MB
Chipset driver Bay Trail (Win10 64-bit) EXE / 3 MB
Ethernet driver Bay Trail (Win10 64-bit) EXE / 56 MB
Graphics driver Bay Trail (Win10 64-bit) EXE / 124 MB
Touch driver B&R (Win10 64-bit) ZIP / 10 MB
E-CAD (plantillas Electro o EPLAN) Versión (fecha) Descargar
Panel EPLAN P8 from V2.4 EXE / 67 MB
Herramientas/Utilidades/Ejemplos Versión (fecha) Descargar
ADI .NET SDK (Win10 2016 64-Bit) ZIP / 2 MB
ADI Development Kit (Win10 2016 64-bit) ZIP / 4 MB
HMI Service Center Maintenance ZIP / 354 KB
HMI Service Center Update Paket ZIP / 507 MB
M-CAD (plantillas mecánicas) Versión (fecha) Descargar
3D file DXF/STEP 5PPC2100.BYxx-000 ZIP / 610 KB

Seleccione país e idioma

B&R Logo