5LS197.6

Short description

Communication module	1x CAN bus, 1x X2X Link master

General information

Ready relay	Normally open and normally closed contact, max. 30 VDC, max. 6 A
Status indicators	1 LED per interface for sending data
Diagnostics
Data transfer	Yes, using LED status indicators and software
Power consumption	2.28 W
Electrical isolation
IF1 - IF2	Yes
PC - IFx	Yes
Certifications
CE	Yes
UL	cULus E115267 Industrial control equipment
EAC	Product family certification

Controller

SRAM	1 MB, battery-backed

Interfaces

Interface IF1
Signal	CAN bus
Variant	4-pin male multipoint connector
Max. distance	1000 m
Transfer rate	Max. 500 kbit/s
Interface IF2
Fieldbus	X2X Link master
Variant	4-pin male multipoint connector
Distance between 2 stations	Max. 100 m

Operating conditions

Degree of protection per EN 60529	IP20 when installed

Ambient conditions

Temperature
Operation	0 to 60°C
Storage	-25 to 70°C
Relative humidity
Operation	5 to 95%, non-condensing

Mechanical properties

Note	Order 3x 0TB704.9 terminal blocks separately Lithium battery included in delivery
Slot	Standard PCI half-size module, Plug & Play
Installation in
B&R Automation PC	Yes
B&R Panel PC	Yes
Desktop PC	Yes

Número de material:

5LS197.6

Descripción:

X2X Link connection
CAN bus interface

Logic scanner, PCI half-size module, 1 X2X Link master interface, electrically isolated, 1 CAN interface, electrically isolated, max. 500 Mbit/s, object buffer in transmit and receive direction, 1 MB SRAM (Automation Runtime), order 3x 0TB704.9 terminal blocks separately

Accesorios obligatorios

Terminal blocks

0TB704.9	Accessory terminal block, 4-pin, screw clamp terminal block 2.5 mm²

Accesorios opcionales

Batteries

0AC201.91	Baterías de litio 4 u., 3 V / 950 mAh pila de botón
4A0006.00-000	Batería de litio, 3 V / 950 mAh pila de botón

Infrastructure components

0AC913.93	Bus adapter, CAN bus, 2 CAN bus interfaces, including 03 m attachment cable (TB704)

Actualizaciones de hardware de Automation Studio	Versión (fecha)	Descargar
V2.6 HW Upgrade (5LS197.6)		EXE / 517 KB Para descargar se debe iniciar sesión
V3.0 HW Upgrade (5LS197.6)		EXE / 508 KB Para descargar se debe iniciar sesión
V3.0 HW Upgrade (5LS197.6)		EXE / 519 KB Para descargar se debe iniciar sesión
V4.0 HW Upgrade (5LS197.6)		EXE / 439 KB Para descargar se debe iniciar sesión

Documentación	Versión (fecha)	Descargar
Datasheet 5LS197.6		PDF / 2 MB Para descargar se debe iniciar sesión

E-CAD (plantillas Electro o EPLAN)	Versión (fecha)	Descargar
APC EPLAN P8 from V2.4		EXE / 99 MB Para descargar se debe iniciar sesión