General information
Module type | ACOPOSmulti plug-in module |
B&R ID code | 0xA9D6 |
Slot | Slot 2 |
Max. power consumption | 800 mW |
Certifications | |
CE | Yes |
UKCA | Yes |
UL |
cULus E225616 Power conversion equipment |
KC | Yes |
Module connection
Module-side connection | 10-pin multipoint connector |
Status indicators | UP LED (module OK) and DN LED (module NOT OK) |
Digital inputs
Quantity | 2 |
Modulation compared to ground potential | Max. 30 V |
Circuit | Sink |
Input current at nominal voltage | Approx. 11 mA |
Input voltage | |
Nominal | 24 VDC |
Maximum | 30 VDC |
Electrical isolation | |
Input - Input | No |
Input - ACOPOSmulti | Yes |
Digital outputs
Quantity | 4 |
Readable outputs | Yes |
Continuous current | |
Outputs 1 - 2 | Max. 50 mA |
Outputs 3 - 4 | Max. 500 mA |
Short-circuit current at 24 V (until cutoff) | |
Outputs 1 - 2 | Approx. 0.2 A |
Outputs 3 - 4 | Approx. 1.2 A |
Electrical isolation | |
Output - ACOPOSmulti | Yes |
Output - Output | No |
Switching frequency (resistive load) | |
Outputs 1 - 2 | Max. 62.5 kHz |
Outputs 3 - 4 | Max. 1.25 kHz |
Switching voltage | |
Minimum | 18 VDC |
Nominal | 24 VDC |
Maximum | 30 VDC |
Switching delay 0 → 1 and 1 → 0 | |
Outputs 1 - 2 | Max. 1 µs |
Outputs 3 - 4 | Max. 50 µs |
Type | |
Outputs 1 - 2 | Push-Pull |
Outputs 3 - 4 | High side |
Protective measures | |
Short-circuit proof | Yes |
Overload-proof | Yes |
Modulation compared to ground potential | |
Outputs 3 - 4 | Max. 30 V |
Ambient conditions
Temperature | |
Operation | |
Nominal | 5 to 40°C |
Maximum | 55°C |
Storage | -25 to 55°C |
Transport | -25 to 70°C |
Relative humidity | |
Operation | 5 to 85% |
Storage | 5 to 95% |
Transport | Max. 95% at 40°C |
Material number:
8BAC0130.000-1Description:
- Digital mixed module for installation in ACOPOSmulti modules
- 2 inputs, +24 VDC
- 2 high-speed outputs, +24 VDC
- 2 standard readable outputs, +24 VDC
Mandatory Accessories
Terminal blocks
8TB1110.20D-00 | 10-pin screw clamp terminal block, 1-row, pitch: 3.5 mm, numbered consecutively, coding D: 1100110011 |
8TB1110.21D-00 | Cage clamp terminal block 10-pin, one-row, pitch: 3.5 mm, coding D: 1100110011 |
Automation Studio HW Upgrades | Version (Date) | Download |
---|---|---|
V3.0 HW Upgrade (8BAC0130.000-1) | EXE / 415 KB | |
V4.0 HW Upgrade (8BAC0130.000-1) | EXE / 199 KB |
Documentation | Version (Date) | Download |
---|---|---|
ACOPOSmulti User´s Manual | PDF / 302 MB | |
Datasheet 8BAC0130.000-1 | PDF / 1 MB |
E-CAD (Electro or EPLAN Templates) | Version (Date) | Download |
---|---|---|
ACOPOSmulti EPLAN P8 from V2.4 | EXE / 81 MB |