General information
Cable construction
Connector
Type | 9-pin female DSUB connector |
Mating cycles | <200 |
Contacts | 9 |
Additional connectors |
8-pin male Mini I/O servo connector Mating cycles: <1500 Contacts: 8 Degree of protection per EN 60529: IP30 when connected |
Degree of protection per EN 60529 | IP20 when connected |
Malzeme numarası:
8ECF00X4.1241C-0Açıklama:
- ACOPOS P3 adapter cable for digital encoder interfaces
- Makes it possible to connect an encoder cable with 9-pin DSUB connector to a digital encoder interface on an ACOPOS P3 8EI servo drive or ACOPOS P3 8EAC0150.00x-1 plug-in module
- Assembled specifically for use with ACOPOS P3 8EI servo drives and ACOPOS P3 8EAC0150.00x-1 plug-in modules
On X4x connectors of ACOPOS P3 SafeMOTION 8EIxxxxxxS... servo drives, it is only permitted to use adapter cable 8ECF00X4.1241C-0 in combination with B&R cables (e.g. 8BCFxxxx.1221B-0).
Dökümantasyon | Sürüm (Tarih) | İndirme |
---|---|---|
Datasheet 8ECF00X4.1241C-0 | PDF / 966 KB |
Sertifikalar | Sürüm (Tarih) | İndirme |
---|---|---|
EU Declaration Servos ACOPOS P3 | PDF / 205 KB | |
UK Declaration ACOPOSmicro | PDF / 109 KB | |
UK Declaration Servos ACOPOS P3 | PDF / 126 KB |