Short description
Power supply module | 24 VDC power supply module for internal I/O power supply |
General information
Input I/O power supply
Input voltage | 24 VDC -15% / +20% |
Input current | Max. 6 A |
Fuse | Integrated 6.3 A, slow-blow, can be replaced |
Reverse polarity protection | No |
Output I/O power supply
Nominal output voltage | 24 VDC |
Behavior on short circuit | Integrated fuse |
Permissible contact load | 6 A |
Electrical properties
Electrical isolation | I/O supply not isolated from I/O power supply |
Operating conditions
Mounting orientation | |
Horizontal | Yes |
Vertical | Yes |
Installation elevation above sea level | |
0 to 2000 m | No limitation |
>2000 m | Reduction of ambient temperature by 0.5°C per 100 m |
Degree of protection per EN 60529 | IP20 |
Ambient conditions
Temperature | |
Operation | |
Horizontal mounting orientation | -25 to 60°C |
Vertical mounting orientation | -25 to 50°C |
Derating | - |
Storage | -40 to 85°C |
Transport | -40 to 85°C |
Relative humidity | |
Operation | 5 to 95%, non-condensing |
Storage | 5 to 95%, non-condensing |
Transport | 5 to 95%, non-condensing |
Mechanical properties
Note |
Order 1x terminal block X20TB12 separately. Order 1x power supply bus module X20BM01 separately |
Pitch | 12.5+0.2 mm |
Materialnummer:
X20PS2110Beskrivning:
- 24 VDC supply module for internal I/O supply
- Fuse for I/O power supply integrated in module
The power supply module is used for the internal I/O power supply. The module has an integrated replaceable fuse for the I/O power supply.
Obligatoriska tillbehör
Bus modules
Terminal blocks
X20TB12 | X20 terminal block, 12-pin, 24 VDC keyed |
Automation Studio HW uppdateringar | Version (datum) | Ladda ner |
---|---|---|
V2.7 HW Upgrade (X20PS2110) | EXE / 1,016 KB | |
V3.0 HW Upgrade (X20PS2110) | EXE / 1 MB | |
V4.0 HW Upgrade (X20PS2110) | EXE / 644 KB |
Dokumentation | Version (datum) | Ladda ner |
---|---|---|
Data sheet X20PS2110 | PDF / 426 KB | |
Installation- / EMC-Guide | PDF / 20 MB | |
X20 System User´s Manual | PDF / 7 MB |
E-CAD (Electro eller EPLAN mallar) | Version (datum) | Ladda ner |
---|---|---|
X20 EPLAN P8 from V2.4 | EXE / 160 MB |
M-CAD (Mechan. mallar) | Version (datum) | Ladda ner |
---|---|---|
3D File DXF/STEP X20 Electronic module | ZIP / 10 KB | |
3D File STEP X20 I/O-Slice | ZIP / 872 KB | |
Dimensions PDF X20 Electronic module | PDF / 3 KB |