DWL@DWL10000382803
| Version | Langue | Système d'exploitation | Date | Taille | Type | Téléchargement |
|---|---|---|---|---|---|---|
| 1.8.0.0 | * | 31/03/2021 | 2 Mo | EXE | AS3.0_HW_X20cIF1072.exe | |
| Description |
V3.0 HW Upgrade (X20cIF1072) Revision information X20cIF1072 Version 1.8.0.0: ID: 719930 Resolve potential boot and warm restart issue In rare cases it could happen that the module is not reliably identified after a bootup or warm restart. Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\58630_0.pci(15), 1\58630_1.pci(5), 1\58630_4.pci(4), 1\58630a0.can(130), 1\58630a1.can(130), 1\58630a4.can(0) Version 1.7.0.0: ID: 676370 / Support ID: 400312519 Support for hardware variant 4 Channeldescription changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\58630_0.pci(15), 1\58630_1.pci(5), 1\58630_4.pci(3), 1\58630a0.can(130), 1\58630a1.can(130), 1\58630a4.can(0) Version 1.6.0.0: ID: 686485 / Support ID: 400315650 Corrected handling of RTR objects Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\58630_0.pci(15), 1\58630_1.pci(5), 1\58630a0.can(130), 1\58630a1.can(130) Version 1.5.0.0: ID: 637130 Support for hardware variant 1 Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\58630_0.pci(15), 1\58630_1.pci(5), 1\58630a0.can(122), 1\58630a1.can(122) Version 1.2.0.0: ID: 611305 CAN passive error In some rare cases the CAN controller in the BC detects erroneous bit errors in CAN frames if the incoming frame starts during a short period of time before the BC itself starts the transmission of a CAN frame. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 611315 Module documentation revised Data sheet V2.33 Channel description changed: No Configurationdescription changed: No Firmware changed: No ID: 618155 / Support ID: 301108691 Boot behavior of X20CP15xx is incorrect. X20IF1072 sporadically causes a boot error in X20CP15xx. Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\58630_0.pci(12), 1\58630a0.can(122) Version 1.1.0.0: ID: 611305 CAN passive error In some rare cases the CAN controller in the BC detects erroneous bit errors in CAN frames if the incoming frame starts during a short period of time before the BC itself starts the transmission of a CAN frame. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 611315 Module documentation revised Data sheet V2.33 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\58630_0.pci(11), 1\58630a0.can(122) Version 1.0.8.0: ID: 517730 Module documentation revised Data sheet V2.32 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\58630_0.pci(9), 1\58630a0.can(122) Version 1.0.7.0: ID: 473690 Error reading NodeSwitch corrected Channel description changed: Yes Configuration description changed: No Firmware changed: No Firmware: 1\58630_0.pci(9), 1\58630a0.can(122) Version 1.0.6.0: ID: 465960 Enhancement data pointModuleOk, update online help Channel description changed: Yes Configuration description changed: No Firmware changed: No Firmware: 1\58630_0.pci(9), 1\58630a0.can(122) Version 1.0.0.2: ID: 372655 Support X20cIF1072 Support for Automation Studio Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\58630_0.pci(9), 1\58630a0.can(122) |
|||||
| Version | Langue | Système d'exploitation | Date | Taille | Type | Téléchargement |
| 1.7.0.0 | * | 21/08/2020 | 2 Mo | EXE | AS3.0_HW_X20cIF1072.exe | |
| Description |
V3.0 HW Upgrade (X20cIF1072) Revision information X20cIF1072 Version 1.7.0.0: ID: 676370 / Support ID: 400312519 Support for hardware variant 4 Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\58630_0.pci(15), 1\58630_1.pci(5), 1\58630_4.pci(2), 1\58630a0.can(130), 1\58630a1.can(130), 1\58630a4.can(0) Version 1.6.0.0: ID: 686485 / Support ID: 400315650 Corrected handling of RTR objects Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\58630_0.pci(15), 1\58630_1.pci(5), 1\58630a0.can(130), 1\58630a1.can(130) Version 1.5.0.0: ID: 637130 Support for hardware variant 1 Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\58630_0.pci(15), 1\58630_1.pci(5), 1\58630a0.can(122), 1\58630a1.can(122) Version 1.2.0.0: ID: 611305 CAN passive error In some rare cases the CAN controller in the BC detects erroneous bit errors in CAN frames if the incoming frame starts during a short period of time before the BC itself starts the transmission of a CAN frame. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 611315 Module documentation revised Data sheet V2.33 Channel description changed: No Configuration description changed: No Firmware changed: No ID: 618155 / Support ID: 301108691 Boot behavior of X20CP15xx is incorrect. X20IF1072 sporadically causes a boot error in X20CP15xx. Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\58630_0.pci(12), 1\58630a0.can(122) Version 1.1.0.0: ID: 611305 CAN passive error In some rare cases the CAN controller in the BC detects erroneous bit errors in CAN frames if the incoming frame starts during a short period of time before theBC itself starts the transmission of a CAN frame. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 611315 Module documentation revised Data sheet V2.33 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\58630_0.pci(11), 1\58630a0.can(122) Version 1.0.8.0: ID: 517730 Module documentation revised Data sheet V2.32 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\58630_0.pci(9), 1\58630a0.can(122) Version 1.0.7.0: ID: 473690 Error reading NodeSwitch corrected Channel description changed: Yes Configuration description changed: No Firmware changed: No Firmware: 1\58630_0.pci(9), 1\58630a0.can(122) Version 1.0.6.0: ID: 465960 Enhancement data point ModuleOk, update online help Channel description changed: Yes Configuration description changed: No Firmware changed: No Firmware: 1\58630_0.pci(9), 1\58630a0.can(122) Version 1.0.0.2: ID: 372655 Support X20cIF1072 Support for Automation Studio Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\58630_0.pci(9), 1\58630a0.can(122) |
|||||
| Version | Langue | Système d'exploitation | Date | Taille | Type | Téléchargement |
| 1.6.0.0 | * | 29/04/2020 | 1 Mo | EXE | AS3.0_HW_X20cIF1072.exe | |
| Description |
V3.0 HW Upgrade (X20cIF1072) Revision information X20cIF1072 Version 1.6.0.0: ID: 686485 / Support ID: 400315650 Corrected handling of RTR objects Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\58630_0.pci(15), 1\58630_1.pci(5), 1\58630a0.can(130), 1\58630a1.can(130) Version 1.5.0.0: ID: 637130 Support for hardware variant 1 Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\58630_0.pci(15), 1\58630_1.pci(5), 1\58630a0.can(122), 1\58630a1.can(122) Version 1.2.0.0: ID: 611305 CAN passive error In some rare cases the CAN controller in the BC detects erroneous bit errors in CAN frames if the incoming frame starts during a shortperiod of time before the BC itself starts the transmission of a CAN frame. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 611315 Module documentation revised Data sheet V2.33 Channel description changed: No Configuration description changed: No Firmware changed: No ID: 618155 / Support ID: 301108691 Boot behavior of X20CP15xx is incorrect. X20IF1072 sporadically causes a boot error in X20CP15xx. Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\58630_0.pci(12), 1\58630a0.can(122) Version 1.1.0.0: ID: 611305 CAN passive error In some rare cases the CAN controller in the BC detects erroneous bit errors in CAN frames if the incoming frame starts during a short period of time before the BC itself starts the transmission of a CAN frame. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 611315 Module documentation revised Data sheet V2.33 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\58630_0.pci(11), 1\58630a0.can(122) Version 1.0.8.0: ID: 517730 Module documentation revised Data sheet V2.32 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\58630_0.pci(9), 1\58630a0.can(122) Version 1.0.7.0: ID: 473690 Error reading NodeSwitch corrected Channel description changed: Yes Configuration description changed: No Firmware changed: No Firmware: 1\58630_0.pci(9), 1\58630a0.can(122) Version 1.0.6.0: ID: 465960 Enhancement data point ModuleOk, update online help Channel description changed: Yes Configuration description changed: No Firmware changed: No Firmware: 1\58630_0.pci(9), 1\58630a0.can(122) Version 1.0.0.2: ID: 372655 Support X20cIF1072 Support for Automation Studio Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\58630_0.pci(9), 1\58630a0.can(122) |
|||||
| Version | Langue | Système d'exploitation | Date | Taille | Type | Téléchargement |
| 1.5.0.0 | * | 30/04/2019 | 1 Mo | EXE | AS3.0_HW_X20cIF1072.exe | |
| Description |
V3.0 HW Upgrade (X20cIF1072) Revision information X20cIF1072 Version 1.5.0.0: ID: 637130 Support for hardware variant 1 Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\58630_0.pci(15), 1\58630_1.pci(5), 1\58630a0.can(122), 1\58630a1.can(122) Version 1.2.0.0: ID: 611305 CAN passive error In some rare cases the CAN controller in the BC detects erroneous bit errors in CAN frames if the incoming frame starts during a short period of time before the BC itself starts the transmission of a CAN frame. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 611315 Module documentation revised Data sheet V2.33 Channel description changed: No Configuration description changed: No Firmware changed: No ID: 618155 / Support ID: 301108691 Boot behavior of X20CP15xx is incorrect. X20IF1072 sporadically causes a boot error in X20CP15xx. Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\58630_0.pci(12), 1\58630a0.can(122) Version 1.1.0.0: ID: 611305 CAN passive error In some rare cases the CAN controller in the BC detects erroneous bit errors in CAN frames if the incoming frame starts during a short period of time before the BC itself starts the transmission of a CAN frame. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 611315 Module documentation revised Data sheet V2.33 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\58630_0.pci(11), 1\58630a0.can(122) Version 1.0.8.0: ID: 517730 Module documentation revised Data sheet V2.32 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\58630_0.pci(9), 1\58630a0.can(122) Version 1.0.7.0: ID: 473690 Error reading NodeSwitch corrected Channel description changed: Yes Configuration description changed: No Firmware changed: No Firmware: 1\58630_0.pci(9), 1\58630a0.can(122) Version 1.0.6.0: ID: 465960 Enhancement data point ModuleOk, update online help Channel description changed: Yes Configuration description changed: No Firmware changed: No Firmware: 1\58630_0.pci(9), 1\58630a0.can(122) Version 1.0.0.2: ID: 372655 Support X20cIF1072 Support for Automation Studio Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\58630_0.pci(9), 1\58630a0.can(122) |
|||||
| Version | Langue | Système d'exploitation | Date | Taille | Type | Téléchargement |
| 1.2.0.0 | * | 31/10/2018 | 1 Mo | EXE | AS3.0_HW_X20cIF1072.exe | |
| Description |
V3.0 HW Upgrade (X20cIF1072) Revision information X20cIF1072 Version 1.2.0.0: ID: 611305 CAN passive error In some rare cases the CAN controller in the BC detects erroneous bit errors in CAN frames ifthe incoming frame starts during a short period of time before the BC itself starts the transmission of a CAN frame. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 611315 Module documentation revised Data sheet V2.33 Channel description changed: No Configuration description changed: No Firmware changed: No ID: 618155 / Support ID: 301108691 Boot behavior of X20CP15xx is incorrect. X20IF1072 sporadically causes a boot error in X20CP15xx. Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\58630_0.pci(12), 1\58630a0.can(122) Version 1.1.0.0: ID: 611305 CAN passive error In some rare cases the CAN controller in the BC detects erroneous bit errors in CAN frames if the incoming frame starts during a short period of time before the BC itself starts the transmission of a CAN frame. Channeldescription changed: No Configuration description changed: No Firmware changed: Yes ID: 611315 Module documentation revised Data sheet V2.33 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\58630_0.pci(11), 1\58630a0.can(122) Version 1.0.8.0: ID: 517730 Module documentation revised Data sheet V2.32 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\58630_0.pci(9), 1\58630a0.can(122) Version 1.0.7.0: ID:473690 Error reading NodeSwitch corrected Channel description changed: Yes Configuration description changed: No Firmware changed: No Firmware: 1\58630_0.pci(9), 1\58630a0.can(122) Version 1.0.6.0: ID: 465960 Enhancement data point ModuleOk, update online help Channel description changed: Yes Configuration description changed: No Firmware changed: No Firmware: 1\58630_0.pci(9), 1\58630a0.can(122) Version 1.0.0.2: ID: 372655 Support X20cIF1072 Support for Automation Studio Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\58630_0.pci(9), 1\58630a0.can(122) |
|||||
| Version | Langue | Système d'exploitation | Date | Taille | Type | Téléchargement |
| 1.0.8.0 | * | 07/02/2017 | 823 Ko | EXE | AS3.0_HW_X20cIF1072.exe | |
| Description |
V3.0 HW Upgrade (X20cIF1072) Revision information X20cIF1072 Version 1.0.8.0: ID: 517730 Module documentation revised Datasheet V2.32 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\58630_0.pci(9), 1\58630a0.can(122) Version 1.0.7.0: ID: 473690 Error reading NodeSwitch corrected Channel description changed: Yes Configuration description changed: No Firmware changed: No Firmware: 1\58630_0.pci(9), 1\58630a0.can(122) Version 1.0.6.0: ID: 465960 Enhancement data point ModuleOk, update online help Channel description changed: Yes Configuration description changed: No Firmware changed: No Firmware: 1\58630_0.pci(9), 1\58630a0.can(122) Version 1.0.0.2: ID: 372655 Support X20cIF1072 Support for Automation Studio Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\58630_0.pci(9), 1\58630a0.can(122) |
|||||
