80MPH6.101S100-01

Short description
Stepper motor Stepper motor flange size 87.1 mm, length 160 mm
General information
Certifications
CE Yes
UKCA Yes
CRA (Cyber Resilience Act) Not applicable
UL cURus E360421
Servo and stepper motors - Component
Specific motor data
Wiring Parallel
Current 10 A
Resistance/Phase 0.24 Ω
Inductance/Phase 1.6 mH
Stall torque 9.3 Nm
Holding torque 13.6 Nm
Detent torque <420 mNm
Rotor inertia Approx. 3.92 kgcm2
General motor data
Stepping angle 1.8°
Max. surface temperature 100°C
Average period of operation between failures 20,000 hours
Shaft type With key
Insulation class B (130°C)
Insulation resistance 25 MΩ min. 500 VDC
Dielectric resistance 1.63 kVDC for 1 minute
Driver supply voltage Max. 80 VDC
Operating conditions
Degree of protection per EN 60529 IP65
Ambient conditions
Temperature
Operation -20 to 40°C
Storage -20 to 85°C
Transport -20 to 85°C
Relative humidity
Operation 5 to 95%, non-condensing
Storage 5 to 95%, non-condensing
Transport 5 to 95%, non-condensing
Mechanical properties
Max. radial load 290 N
Max. axial load 225 N
Weight 4,400 g
Length 160.5 mm
Número de material:
80MPH6.101S100-01
Descripción:
2-phase hybrid stepper motor, 87.1 mm flange, length 160.5 mm, 10 A parallel, 13.6 Nm holding torque, 9.3 Nm stall torque

Seleccione país e idioma

B&R Logo