DWL@DWL10000604616
| Version | Langue | Système d'exploitation | Date | Taille | Type | Téléchargement |
|---|---|---|---|---|---|---|
| 2.5.0.0 | * | 22/09/2021 | 934 Ko | EXE | AS4_HW_X20SA4430.exe | |
| Description |
V4.6 HW Upgrade (X20SA4430) Revision information X20SA4430 Version 2.5.0.0: ID: 720235 Improved stability of FW during internalhardware tests Improved stability of FW during internal hardware tests Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 10\47285_1.fw(574) Version 2.4.0.0: ID: 719735 Failsafe at every boot It could happen under rare conditions that the module is stuck in failsafe state at every boot,generating logger messages: -1073565951/-1073561855 "internal cross communication error EPS" or -1073565945/-1073561849 "Received crc data is not equal to sent crc data" Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 726595 The power calculation of the modules is supported The data for the power calculation of the data sheet is included in the HWX. Channel description changed: No Configuration description changed: No Firmware changed: No ID: 727115 New data sheet V2.10 For changes see chapter "Version history" in the data sheet. Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 10\47285_1.fw(573) Version 2.3.0.0: ID: 692425 / Support ID: 400326291 Handling of ADC-Tests adjusted Handling of ADC-Tests if DisableShuntTest=Yes is adjusted. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 697820 /Support ID: 400328445 LED status corrected Channel LED's are corrected and it fits to dokumentation. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 714570 Limit values for the module cycle time adjusted The limit values for the calculation and monitoring of module cycle time and slot time adjusted. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 714585 New data sheet V2.08 For changes see chapter "Version history" in the data sheet. Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 10\47285_1.fw(572) Version 2.2.0.0: ID: 668535 Adaptations for Automation Studio 4.8 Channel description changed: No Configuration description changed: No Firmware changed: No ID: 688705 / Support ID: 400299371 Loss of safety connection Loss of safety connection, even though the parametrized "safe dataduration"is longer than the network failure Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 689690 Propagation delay statistics The Propagation delay statistics can now be read out. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 689920 Improvement of the internal voltage monitoring. Improvement of the internal voltage monitoring. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 690065 New data sheet V2.06 For changes see chapter "Version history" in the data sheet. Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 10\47285_1.fw(571) Version 2.1.0.0: ID: 644150 major (even incompatible) changes for mapp Safety First upgrade for mapp Safety. ATTENTION: existing applications must be adapted - see chapter "Switching to mapp Safety" in help! Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 10\47285_1.fw(570) Version 1.10.10.0: ID: 622660 Sporadic errors 114982, 102914, 120065, 110385 Sporadic errors 114982, 102914, 120065, 110385 have been fixed Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 3\47285_1.fw(295), 4\47285_1.fw(301), 5\47285_1.fw(302), 6\47285_1.fw(331) Version 1.10.9.1: ID:643130 data sheet V1.141 See chapture "Version history" in the datasheet. i.a. calculation of Safety response time has been updated. Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47285_1.fw(295), 4\47285_1.fw(301), 5\47285_1.fw(302), 6\47285_1.fw(330) Version 1.10.9.0: ID: 615210 Correction of the internal Vref measurement Internal Vref measurementadapted for the extended temperature range Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 618205 logger entry 112174, 108078 Logger entry 112174, 108078 could happen sporadically with large projects. Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 3\47285_1.fw(295), 4\47285_1.fw(301), 5\47285_1.fw(302), 6\47285_1.fw(330) Version 1.10.1.5: ID: 585620 User configurable calculation of the input value during internal tests alsoin AS 3.x User configurable calculation of the input value during internal tests alsoin AS 3.x Channel description changed: Yes Configuration description changed: Yes Firmware changed: No Firmware: 3\47285_1.fw(295), 4\47285_1.fw(301), 5\47285_1.fw(302), 6\47285_1.fw(322) Version 1.10.1.1: ID: 306540 / Support ID: 400096897 selected thresholds are transmitedvia acyclic registers selected thresholds are transmited via acyclic registers Channel description changed: No Configuration description changed: No Firmware changed: No ID: 533025 Add blackout mode Add blackout mode Channel description changed: No Configurationdescription changed: No Firmware changed: No ID: 533110 New channel for ConnectionValid New channel for ConnectionValid Channel description changed: No Configuration description changed: No Firmware changed: No ID: 539120 Increased input range The inputrange is extended to 500uA to 25mA. Channel description changed: No Configuration description changed: No Firmware changed: No ID: 539125 User configurable calculation of the input value during internal tests User configurable calculation of the input value during internal tests Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47285_1.fw(295), 4\47285_1.fw(301), 5\47285_1.fw(302), 6\47285_1.fw(322) Version 1.10.0.2: ID: 485110 Added coated type of module in help Added coated type of module in help Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47285_1.fw(295), 4\47285_1.fw(301), 5\47285_1.fw(302), 6\47285_1.fw(321) Version 1.10.0.1: ID: 470485 changed manual verion to 1.100 changed manual verion to 1.100 Channel description changed: No Configuration description changed: No Firmware changed: No ID: 470495 Support ofrelease 1.10 including openSAFETY 1.5 Support of release 1.10 including openSAFETY 1.5 with easier parametrization of timing parameters Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 3\47285_1.fw(295), 4\47285_1.fw(301), 5\47285_1.fw(302), 6\47285_1.fw(321) Version 1.9.0.0: ID: 404200 safety response time The safety response time is now depending on the configured filter. Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 3\47285_1.fw(295), 4\47285_1.fw(301), 5\47285_1.fw(302) Version 1.7.0.1: ID: 388320 internal Adjustments internal Adjustments Channel descriptionchanged: No Configuration description changed: No Firmware changed:No Firmware: 3\47285_1.fw(295), 4\47285_1.fw(301) Version 1.7.0.0: ID: 370700 Improvement on shunttest Now more values per shunt are measured and the mean values are compared. The shunttest can be disabled by the SafeDESIGNER. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 371495 changed manual verion to 1.70 changed manual verion to 1.70 Channeldescription changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47285_1.fw(295), 4\47285_1.fw(301) Version 1.6.0.7: ID: 339210 internal Adjustments internal Adjustments Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47285_1.fw(295) Version 1.6.0.5: ID: 335310 / Support ID: 400083263 unlock of SafeModule IDs > 300 SafeModule IDs up to 1023 are now unlocked Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47285_1.fw(295) Version 1.6.0.3: ID: 332260 The module also supports SafetyRelease 1.7 Starting with this version, the module also supports SafetyRelease 1.7 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47285_1.fw(295) Version 1.6.0.1: ID: 328585 Correction for responsetimecalculator Correction of parameters used for the calculation of the worstcase responsetime in Release 1.6 withthe responsetimecalculator. Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 3\47285_1.fw(295) Version 1.6.0.0: ID: 314075 Adaption of module configuration file release 1.6 Adaption of module configuration file release 1.6 Channel description changed: No Configuration descriptionchanged: Yes Firmware changed: No Firmware: 3\47285_1.fw(295) Version 1.5.0.4: ID: 303345 Support of AutomationStudio 4.0 Support of AutomationStudio 4.0 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47285_1.fw(295) Version 1.5.0.0: ID: 293985 First Official Release First Official Release Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47285_1.fw(295) |
|||||
| Version | Langue | Système d'exploitation | Date | Taille | Type | Téléchargement |
| 2.4.0.0 | * | 09/06/2021 | 934 Ko | EXE | AS4_HW_X20SA4430.exe | |
| Description |
V4.6 HW Upgrade (X20SA4430) Revision information X20SA4430 Version 2.4.0.0: ID: 719735 Failsafe at every boot It could happen under rare conditions that the module is stuck in failsafe state at every boot, generating logger messages: -1073565951/-1073561855 "internal cross communication error EPS" or -1073565945/-1073561849 "Received crc data is not equal to sent crc data" Channel description changed: No Configurationdescription changed: No Firmware changed: Yes ID: 726595 The power calculation of the modules is supported The data for the power calculation of the data sheet is included in the HWX. Channel description changed: No Configuration description changed: No Firmware changed: No ID: 727115 New data sheet V2.10 For changes see chapter "Version history" in the data sheet. Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 10\47285_1.fw(573) Version 2.3.0.0: ID: 692425 / Support ID:400326291 Handling of ADC-Tests adjusted Handling of ADC-Tests if DisableShuntTest=Yes is adjusted. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 697820 / Support ID: 400328445 LED status corrected Channel LED's are corrected and it fits to dokumentation. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 714570 Limit values for the module cycle time adjusted The limit values for the calculation and monitoring of module cycle time and slot time adjusted. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 714585 New data sheet V2.08 For changes see chapter "Version history" in the data sheet. Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 10\47285_1.fw(572) Version 2.2.0.0: ID: 668535 Adaptations for Automation Studio 4.8 Channel description changed: No Configuration description changed: No Firmware changed: No ID: 688705 / Support ID: 400299371 Loss of safetyconnection Loss of safety connection, even though the parametrized "safedata duration"is longer than the network failure Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 689690 Propagation delay statistics The Propagation delay statistics can now be read out. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID:689920 Improvement of the internal voltage monitoring. Improvement of the internal voltage monitoring. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 690065 New data sheet V2.06 For changes see chapter "Version history" in the data sheet. Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 10\47285_1.fw(571) Version 2.1.0.0: ID: 644150 major (even incompatible) changes for mapp Safety First upgrade for mapp Safety. ATTENTION: existing applications must be adapted - see chapter "Switching to mapp Safety" in help! Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 10\47285_1.fw(570) Version 1.10.10.0: ID: 622660 Sporadic errors 114982, 102914, 120065, 110385 Sporadic errors 114982, 102914, 120065, 110385 have been fixed Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 3\47285_1.fw(295), 4\47285_1.fw(301), 5\47285_1.fw(302), 6\47285_1.fw(331) Version 1.10.9.1: ID: 643130 data sheet V1.141 See chapture "Version history" in thedata sheet. i.a. calculation of Safety response time has been updated. Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47285_1.fw(295), 4\47285_1.fw(301), 5\47285_1.fw(302), 6\47285_1.fw(330) Version 1.10.9.0: ID: 615210 Correction of the internal Vref measurement Internal Vref measurement adapted for the extended temperature range Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 618205 logger entry 112174, 108078 Logger entry 112174,108078 could happen sporadically with large projects. Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 3\47285_1.fw(295), 4\47285_1.fw(301), 5\47285_1.fw(302), 6\47285_1.fw(330) Version 1.10.1.5: ID: 585620 User configurable calculation of the input value during internal tests alsoin AS 3.x User configurable calculation of the input value during internal tests alsoin AS 3.x Channel description changed: Yes Configuration description changed: Yes Firmware changed: No Firmware: 3\47285_1.fw(295), 4\47285_1.fw(301), 5\47285_1.fw(302), 6\47285_1.fw(322) Version 1.10.1.1: ID: 306540 / Support ID: 400096897 selected thresholds are transmited via acyclic registers selected thresholds are transmited via acyclic registers Channel description changed: No Configuration description changed: No Firmware changed: No ID: 533025 Add blackout mode Add blackout mode Channel description changed: No Configuration description changed: No Firmware changed: No ID: 533110 New channel for ConnectionValid New channel for ConnectionValid Channel description changed: No Configuration description changed: No Firmware changed: No ID: 539120 Increased input range The input range is extended to 500uA to 25mA. Channel description changed: No Configuration description changed: No Firmware changed: No ID: 539125 User configurable calculation of the input value during internal tests User configurable calculation of the input value during internal tests Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47285_1.fw(295), 4\47285_1.fw(301), 5\47285_1.fw(302), 6\47285_1.fw(322) Version 1.10.0.2: ID: 485110 Added coated type of module in help Added coated typeof module in help Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47285_1.fw(295), 4\47285_1.fw(301), 5\47285_1.fw(302), 6\47285_1.fw(321) Version 1.10.0.1: ID: 470485 changed manual verion to 1.100 changed manual verion to 1.100 Channel description changed: No Configuration description changed: No Firmware changed: No ID: 470495 Support of release 1.10 including openSAFETY 1.5 Support of release 1.10 including openSAFETY 1.5 with easier parametrization of timing parameters Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 3\47285_1.fw(295), 4\47285_1.fw(301), 5\47285_1.fw(302), 6\47285_1.fw(321) Version 1.9.0.0: ID: 404200 safety response time The safety response time is now depending on the configured filter. Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 3\47285_1.fw(295), 4\47285_1.fw(301), 5\47285_1.fw(302) Version 1.7.0.1: ID: 388320 internal Adjustments internal Adjustments Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47285_1.fw(295), 4\47285_1.fw(301) Version 1.7.0.0: ID: 370700 Improvement on shunttest Now more values per shunt are measured and the mean values are compared. The shunttest can be disabled by the SafeDESIGNER. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 371495 changed manual verion to 1.70 changed manual verion to 1.70 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47285_1.fw(295), 4\47285_1.fw(301) Version 1.6.0.7: ID: 339210 internal Adjustments internalAdjustments Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47285_1.fw(295) Version 1.6.0.5: ID: 335310 / Support ID: 400083263 unlock ofSafeModule IDs > 300 SafeModule IDs up to 1023 are now unlocked Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47285_1.fw(295) Version 1.6.0.3: ID: 332260 The module also supports SafetyRelease 1.7 Starting with this version, the module also supports SafetyRelease 1.7 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47285_1.fw(295) Version 1.6.0.1: ID: 328585 Correction for responsetimecalculator Correction of parameters used for the calculation of the worstcase responsetime in Release 1.6with the responsetimecalculator. Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 3\47285_1.fw(295) Version 1.6.0.0: ID: 314075 Adaption ofmodule configuration file release 1.6 Adaption of module configuration file release 1.6 Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 3\47285_1.fw(295) Version 1.5.0.4: ID: 303345 Support of AutomationStudio 4.0 Support of AutomationStudio 4.0 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47285_1.fw(295) Version 1.5.0.0: ID: 293985 First Official Release First Official Release Channel description changed:No Configuration description changed: No Firmware changed: No Firmware: 3\47285_1.fw(295) |
|||||
| Version | Langue | Système d'exploitation | Date | Taille | Type | Téléchargement |
| 2.3.0.0 | * | 08/03/2021 | 929 Ko | EXE | AS4_HW_X20SA4430.exe | |
| Description |
V4.6 HW Upgrade (X20SA4430) Revision information X20SA4430 Version 2.3.0.0: ID: 692425 / Support ID: 400326291 Handling of ADC-Tests adjusted Handling of ADC-Tests if DisableShuntTest=Yes is adjusted. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 697820 / Support ID: 400328445 LED status corrected Channel LED's are corrected and it fits to dokumentation. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 714570 Limit values for the module cycle time adjusted The limit values for the calculation and monitoring of module cycle time and slot time adjusted. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 714585 New data sheet V2.08 For changes see chapter "Version history" in the data sheet. Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 10\47285_1.fw(572) Version 2.2.0.0: ID: 668535 Adaptations for Automation Studio 4.8 Channel description changed: No Configuration description changed: No Firmware changed: No ID: 688705 / Support ID: 400299371 Loss of safety connection Loss of safety connection, even though the parametrized "safe data duration" is longer than the network failure Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 689690 Propagation delay statistics The Propagation delay statistics can now be read out. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 689920 Improvement of the internal voltage monitoring. Improvement of the internal voltage monitoring. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 690065 New data sheet V2.06 For changes see chapter "Version history" in the data sheet. Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 10\47285_1.fw(571) Version 2.1.0.0: ID: 644150 major (even incompatible) changes for mapp Safety First upgrade for mapp Safety. ATTENTION: existing applications must be adapted - see chapter "Switching to mapp Safety" in help! Channel descriptionchanged: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 10\47285_1.fw(570) Version 1.10.10.0: ID: 622660 Sporadic errors 114982, 102914, 120065, 110385 Sporadic errors 114982, 102914, 120065, 110385 have been fixed Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 3\47285_1.fw(295), 4\47285_1.fw(301), 5\47285_1.fw(302), 6\47285_1.fw(331) Version 1.10.9.1: ID: 643130 data sheet V1.141 See chapture "Version history" in the data sheet. i.a. calculationof Safety response time has been updated. Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47285_1.fw(295), 4\47285_1.fw(301), 5\47285_1.fw(302), 6\47285_1.fw(330) Version 1.10.9.0: ID: 615210 Correction of the internal Vref measurement Internal Vref measurement adapted for the extended temperature range Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 618205 logger entry 112174, 108078 Logger entry 112174, 108078 could happen sporadically with large projects. Channel description changed: No Configurationdescription changed: No Firmware changed: Yes Firmware: 3\47285_1.fw(295), 4\47285_1.fw(301), 5\47285_1.fw(302), 6\47285_1.fw(330) Version1.10.1.5: ID: 585620 User configurable calculation of the inputvalue during internal tests also in AS 3.x User configurable calculationof the input value during internal tests also in AS 3.x Channel description changed: Yes Configuration description changed: Yes Firmware changed: No Firmware: 3\47285_1.fw(295), 4\47285_1.fw(301), 5\47285_1.fw(302), 6\47285_1.fw(322) Version 1.10.1.1: ID: 306540 / Support ID: 400096897 selected thresholds are transmited via acyclic registers selected thresholds are transmited via acyclic registers Channel description changed: No Configuration description changed: No Firmware changed: No ID: 533025 Add blackout mode Add blackout mode Channel description changed: No Configuration description changed: No Firmware changed: No ID: 533110 New channel for ConnectionValid New channel for ConnectionValid Channel description changed: No Configuration description changed: No Firmware changed: No ID: 539120 Increased input range The input range is extended to 500uAto 25mA. Channel description changed: No Configuration description changed: No Firmware changed: No ID: 539125 User configurable calculation of the input value during internal tests User configurablecalculation of the input value during internal tests Channel descriptionchanged: No Configuration description changed: No Firmware changed:No Firmware: 3\47285_1.fw(295), 4\47285_1.fw(301), 5\47285_1.fw(302), 6\47285_1.fw(322) Version 1.10.0.2: ID: 485110 Added coatedtype of module in help Added coated type of module in help Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47285_1.fw(295), 4\47285_1.fw(301), 5\47285_1.fw(302), 6\47285_1.fw(321) Version 1.10.0.1: ID: 470485 changed manual verion to 1.100 changed manual verion to 1.100 Channeldescription changed: No Configuration description changed: No Firmware changed: No ID: 470495 Support of release 1.10 including openSAFETY 1.5 Support of release 1.10 including openSAFETY 1.5 with easier parametrization of timing parameters Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 3\47285_1.fw(295), 4\47285_1.fw(301), 5\47285_1.fw(302), 6\47285_1.fw(321) Version 1.9.0.0: ID: 404200 safety response time Thesafety response time is now depending on the configured filter. Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 3\47285_1.fw(295), 4\47285_1.fw(301), 5\47285_1.fw(302) Version 1.7.0.1: ID: 388320 internal Adjustments internal Adjustments Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47285_1.fw(295), 4\47285_1.fw(301) Version 1.7.0.0: ID: 370700 Improvement on shunttest Now more values per shunt are measured and the mean values are compared. The shunttest can be disabled by the SafeDESIGNER. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 371495 changed manual verion to 1.70 changed manual verion to 1.70 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47285_1.fw(295), 4\47285_1.fw(301) Version 1.6.0.7: ID: 339210 internal Adjustments internal Adjustments Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47285_1.fw(295) Version 1.6.0.5: ID:335310 / Support ID: 400083263 unlock of SafeModule IDs > 300 SafeModule IDs up to 1023 are now unlocked Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47285_1.fw(295) Version 1.6.0.3: ID: 332260 The module also supports SafetyRelease 1.7 Starting with this version, the modulealso supports SafetyRelease 1.7 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47285_1.fw(295) Version 1.6.0.1: ID: 328585 Correction for responsetimecalculator Correction of parameters used for the calculation of the worstcase responsetime in Release 1.6 with the responsetimecalculator. Channel description changed: No Configuration description changed:Yes Firmware changed: No Firmware: 3\47285_1.fw(295) Version1.6.0.0: ID: 314075 Adaption of module configuration file release 1.6 Adaption of module configuration file release 1.6 Channel description changed: No Configuration description changed: Yes Firmwarechanged: No Firmware: 3\47285_1.fw(295) Version 1.5.0.4: ID: 303345 Support of AutomationStudio 4.0 Support of AutomationStudio 4.0 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47285_1.fw(295) Version 1.5.0.0: ID: 293985 First Official Release First Official Release Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47285_1.fw(295) |
|||||
| Version | Langue | Système d'exploitation | Date | Taille | Type | Téléchargement |
| 2.2.0.0 | * | 21/07/2020 | 886 Ko | EXE | AS4_HW_X20SA4430.exe | |
| Description |
V4.6 HW Upgrade (X20SA4430) Revision information X20SA4430 Version 2.2.0.0: ID: 668535 Adaptations for Automation Studio 4.8 Channel description changed: No Configuration description changed: No Firmware changed: No ID: 688705 / Support ID: 400299371 Loss of safety connection Loss of safety connection, even though the parametrized "safe data duration" is longer than the network failure Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 689690 Propagation delay statistics The Propagation delay statistics can now be read out. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 689920 Improvement of the internal voltage monitoring. Improvement of the internal voltage monitoring. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 690065 New data sheet V2.06 For changes see chapter "Version history" in the data sheet. Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 10\47285_1.fw(571) Version 2.1.0.0: ID: 644150 major (even incompatible) changes for mapp Safety First upgrade for mapp Safety. ATTENTION: existing applications must be adapted - see chapter "Switching to mapp Safety" in help! Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 10\47285_1.fw(570) Version 1.10.10.0: ID: 622660 Sporadic errors 114982, 102914, 120065, 110385 Sporadic errors 114982, 102914, 120065, 110385 have been fixed Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 3\47285_1.fw(295),4\47285_1.fw(301), 5\47285_1.fw(302), 6\47285_1.fw(331) Version 1.10.9.1: ID: 643130 data sheet V1.141 See chapture "Version history" in the data sheet. i.a. calculation of Safety response time has been updated. Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47285_1.fw(295), 4\47285_1.fw(301), 5\47285_1.fw(302), 6\47285_1.fw(330) Version 1.10.9.0: ID: 615210 Correction of the internal Vref measurement Internal Vref measurement adapted for the extended temperature range Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 618205 logger entry 112174, 108078 Logger entry 112174, 108078 could happen sporadically with large projects. Channeldescription changed: No Configuration description changed: No Firmware changed: Yes Firmware: 3\47285_1.fw(295), 4\47285_1.fw(301), 5\47285_1.fw(302), 6\47285_1.fw(330) Version 1.10.1.5: ID: 585620 User configurable calculation of the input value during internal tests alsoin AS 3.x User configurable calculation of the input value during internaltests also in AS 3.x Channel description changed: Yes Configurationdescription changed: Yes Firmware changed: No Firmware: 3\47285_1.fw(295), 4\47285_1.fw(301), 5\47285_1.fw(302), 6\47285_1.fw(322) Version1.10.1.1: ID: 306540 / Support ID: 400096897 selected thresholds are transmited via acyclic registers selected thresholds are transmitedvia acyclic registers Channel description changed: No Configurationdescription changed: No Firmware changed: No ID: 533025 Add blackout mode Add blackout mode Channel description changed: No Configuration description changed: No Firmware changed: No ID: 533110 New channel for ConnectionValid New channel for ConnectionValid Channel description changed: No Configuration description changed: No Firmware changed: No ID: 539120 Increased input range The input range is extended to 500uA to 25mA. Channel description changed: No Configuration description changed: No Firmware changed: No ID: 539125 User configurable calculation of the input value during internal tests User configurable calculation of the input value during internal tests Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47285_1.fw(295), 4\47285_1.fw(301), 5\47285_1.fw(302), 6\47285_1.fw(322) Version 1.10.0.2: ID: 485110 Added coated type of module in help Added coated type of module in help Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47285_1.fw(295), 4\47285_1.fw(301), 5\47285_1.fw(302), 6\47285_1.fw(321) Version 1.10.0.1: ID: 470485 changed manual verion to 1.100 changed manual verion to 1.100 Channel description changed: No Configuration description changed: No Firmware changed: No ID: 470495 Support of release 1.10 including openSAFETY 1.5 Support of release1.10 including openSAFETY 1.5 with easier parametrizationof timing parameters Channel description changed: No Configuration description changed:Yes Firmware changed: No Firmware: 3\47285_1.fw(295), 4\47285_1.fw(301), 5\47285_1.fw(302), 6\47285_1.fw(321) Version 1.9.0.0: ID: 404200 safety response time The safety response time is now depending on the configured filter. Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 3\47285_1.fw(295), 4\47285_1.fw(301), 5\47285_1.fw(302) Version 1.7.0.1: ID: 388320 internal Adjustments internal Adjustments Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47285_1.fw(295), 4\47285_1.fw(301) Version 1.7.0.0: ID: 370700 Improvement on shunttest Now more values per shunt are measured and the mean values are compared. The shunttest can be disabled by the SafeDESIGNER. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 371495 changed manual verion to 1.70 changed manual verion to 1.70 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47285_1.fw(295), 4\47285_1.fw(301) Version 1.6.0.7: ID: 339210 internal Adjustments internal Adjustments Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47285_1.fw(295) Version 1.6.0.5: ID: 335310 / Support ID: 400083263 unlock of SafeModule IDs > 300 SafeModule IDs up to 1023 are now unlocked Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47285_1.fw(295) Version1.6.0.3: ID: 332260 The module also supports SafetyRelease 1.7 Starting with this version, the module also supports SafetyRelease 1.7 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47285_1.fw(295) Version 1.6.0.1: ID: 328585 Correction for responsetimecalculator Correction of parameters used for the calculation of the worstcase responsetime in Release 1.6 with the responsetimecalculator. Channel description changed:No Configuration description changed: Yes Firmware changed: No Firmware: 3\47285_1.fw(295) Version 1.6.0.0: ID: 314075 Adaption of module configuration file release 1.6 Adaption of module configuration file release 1.6 Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 3\47285_1.fw(295) Version 1.5.0.4: ID: 303345 Support of AutomationStudio 4.0 Support of AutomationStudio 4.0 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47285_1.fw(295) Version 1.5.0.0: ID: 293985 First Official Release First Official Release Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47285_1.fw(295) |
|||||
| Version | Langue | Système d'exploitation | Date | Taille | Type | Téléchargement |
| 2.1.0.0 | * | 05/07/2019 | 750 Ko | EXE | AS4_HW_X20SA4430.exe | |
| Description |
V4.6 HW Upgrade (X20SA4430) Revision information X20SA4430 Version 2.1.0.0: ID: 644150 major (even incompatible) changes for mapp Safety First upgrade for mapp Safety. ATTENTION: existing applications must be adapted - see chapter "Switching to mapp Safety" in help! Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 10\47285_1.fw(570) Version 1.10.10.0: ID: 622660 Sporadic errors 114982, 102914, 120065, 110385 Sporadic errors 114982, 102914, 120065, 110385 have been fixed Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 3\47285_1.fw(295), 4\47285_1.fw(301), 5\47285_1.fw(302), 6\47285_1.fw(331) Version 1.10.9.1: ID: 643130 data sheet V1.141 See chapture "Version history" in the data sheet. i.a. calculation of Safety response time has been updated. Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47285_1.fw(295), 4\47285_1.fw(301), 5\47285_1.fw(302), 6\47285_1.fw(330) Version 1.10.9.0: ID: 615210 Correction of the internal Vref measurement Internal Vref measurement adapted for the extended temperature range Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 618205 logger entry 112174, 108078 Logger entry 112174, 108078 could happen sporadically with large projects. Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 3\47285_1.fw(295), 4\47285_1.fw(301), 5\47285_1.fw(302), 6\47285_1.fw(330) Version 1.10.1.5: ID: 585620 User configurable calculation of the input value during internal tests alsoin AS 3.x User configurable calculation of the input value during internal tests alsoin AS 3.x Channel description changed: Yes Configuration description changed: Yes Firmware changed: No Firmware: 3\47285_1.fw(295), 4\47285_1.fw(301), 5\47285_1.fw(302), 6\47285_1.fw(322) Version 1.10.1.1: ID: 306540 / Support ID: 400096897 selected thresholds are transmited via acyclic registers selected thresholds are transmited via acyclic registers Channel description changed: No Configuration description changed: No Firmware changed: No ID: 533025 Add blackout mode Add blackout mode Channel description changed: No Configuration description changed: No Firmware changed: No ID: 533110 New channel for ConnectionValid New channel for ConnectionValid Channel description changed: No Configuration description changed: No Firmware changed: No ID: 539120 Increased input range The input range is extended to 500uA to 25mA. Channel description changed: No Configuration description changed: No Firmware changed: No ID: 539125 User configurable calculation of the input value during internal tests User configurable calculation of the input value during internal tests Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47285_1.fw(295), 4\47285_1.fw(301), 5\47285_1.fw(302), 6\47285_1.fw(322) Version 1.10.0.2: ID: 485110 Added coated type of module in help Added coated type of module in help Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47285_1.fw(295), 4\47285_1.fw(301), 5\47285_1.fw(302), 6\47285_1.fw(321) Version 1.10.0.1: ID: 470485 changed manual verion to 1.100 changed manual verion to 1.100 Channel description changed: No Configuration description changed: No Firmware changed: No ID: 470495 Support of release 1.10 including openSAFETY 1.5 Support of release 1.10 including openSAFETY 1.5 with easier parametrization of timing parameters Channel description changed: No Configuration description changed: Yes Firmware changed:No Firmware: 3\47285_1.fw(295), 4\47285_1.fw(301), 5\47285_1.fw(302), 6\47285_1.fw(321) Version 1.9.0.0: ID: 404200 safety response time The safety response time is now depending on the configured filter. Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 3\47285_1.fw(295), 4\47285_1.fw(301), 5\47285_1.fw(302) Version 1.7.0.1: ID: 388320 internal Adjustments internal Adjustments Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47285_1.fw(295), 4\47285_1.fw(301) Version 1.7.0.0: ID: 370700 Improvement on shunttest Now more values per shunt are measured and the mean values are compared. The shunttest can be disabled by the SafeDESIGNER. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 371495 changed manual verion to 1.70 changed manual verion to 1.70 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47285_1.fw(295), 4\47285_1.fw(301) Version 1.6.0.7: ID: 339210 internal Adjustments internal Adjustments Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47285_1.fw(295) Version 1.6.0.5: ID: 335310 / Support ID: 400083263 unlock of SafeModule IDs > 300 SafeModule IDs up to 1023 are now unlocked Channel descriptionchanged: No Configuration description changed: No Firmware changed:No Firmware: 3\47285_1.fw(295) Version 1.6.0.3: ID: 332260 The module also supports SafetyRelease 1.7 Starting with this version, the module also supports SafetyRelease 1.7 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47285_1.fw(295) Version 1.6.0.1: ID: 328585 Correction for responsetimecalculator Correction of parameters used for the calculation of the worstcase responsetime in Release 1.6 with the responsetimecalculator. Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 3\47285_1.fw(295) Version 1.6.0.0: ID: 314075 Adaption of module configuration file release 1.6 Adaption of module configuration file release 1.6 Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 3\47285_1.fw(295) Version 1.5.0.4: ID: 303345 Support of AutomationStudio 4.0 Support of AutomationStudio 4.0 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47285_1.fw(295) Version 1.5.0.0: ID: 293985 First Official Release First Official Release Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47285_1.fw(295) |
|||||
