DWL@DWL10000303844
| Version | Langue | Système d'exploitation | Date | Taille | Type | Téléchargement |
|---|---|---|---|---|---|---|
| 1.4.0.0 | * | 17/02/2023 | 1 Mo | EXE | AS4_HW_X20DO4322.exe | |
| Description |
V4.0 HW Upgrade (X20DO4322) Revision information X20DO4322 Version 1.4.0.0: ID: 766220 Failure ModulOK If this module starting with revision G1 is operated behind a bus controller, the network status fails every 10 s (for one X2X cycle). This failure has the following effects. - Local X2X bus: No effect - POWERLINK / Modbus TCP / PROFIBUS / CAN I/O: No effect - CANopen: "Object 0x30B2 Network status OK" fails sporadically. - OPC-UA: Flag ModuleOK of the respective X2X module may fail sporadically - EthernetIP / PROFINET / Sercos3 / EtherCAT: - No effect directly on the bus controller. - The network status is transferred as BYTE at the beginning of the cyclicdata of the respective X2X station (ModuleOK) and can be evaluated by the respective remote station (data point mapping and evaluation within the application). - Setpoint: 0xF5, in the event of error: 0xF1 Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\7063_1.fw(560), 1\7063_20.fw(220), 1\7063_5.fw(816) Version 1.3.0.0: ID: 749075 Support new HW variant 20 Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\7063_1.fw(560), 1\7063_20.fw(210), 1\7063_5.fw(816) Version 1.2.0.0: ID: Adaptations for Automation Studio 4.11 Channel description changed: no Configuration description changed: yes Firmware changed: no Version 1.1.0.0: ID: Adaptations for Automation Studio 4.8 Channel description changed: no Configuration description changed: yes Firmware changed: no Version 1.0.3.0: ID: 467155 Module documentation revised Data sheet V 3.22 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7063_1.fw(560), 1\7063_5.fw(816) Version 1.0.2.4: ID: 393460 Enhancement online-help files Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7063_1.fw(560), 1\7063_5.fw(816) Version 1.0.2.3: ID: 393015 Enhancements packed data point for outputs Channel description changed: Yes Configuration description changed: No Firmware changed: No Firmware: 1\7063_1.fw(560), 1\7063_5.fw(816) Version1.0.2.2: ID: 366269 APROL entries revised Datapoint OSPValid corrected Channel description changed: Yes Configuration description changed: No Firmware changed: No Firmware: 1\7063_1.fw(560), 1\7063_5.fw(816) Version 1.0.2.0: ID: 317670 Additional function model "OSP mode" OSP - Output Set Predefined In OSP mode, theuser defines the output behavior in case of connection loss between PLC and module. In doing so the power supply of the module must be assured. Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\7063_1.fw(560), 1\7063_5.fw(816) Version 1.0.1.0: ID: 217455 Adaptation UART Re-Init Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\7063_1.fw(560), 1\7063_5.fw(800) Version 1.0.0.1: ID: 211275 Display correction in IO-Map on SGC Targets Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7063_1.fw(530) |
|||||
| Version | Langue | Système d'exploitation | Date | Taille | Type | Téléchargement |
| 1.3.0.0 | * | 19/08/2022 | 896 Ko | EXE | AS4_HW_X20DO4322.exe | |
| Description |
V4.0 HW Upgrade (X20DO4322) Revision information X20DO4322 Version 1.3.0.0: ID: 749075 Support new HW variant 20 Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\7063_1.fw(560), 1\7063_20.fw(210), 1\7063_5.fw(816) Version 1.2.0.0: ID: Adaptations for Automation Studio 4.11 Channel description changed: no Configuration description changed: yes Firmware changed: no Version 1.1.0.0: ID: Adaptations for Automation Studio 4.8 Channel description changed: no Configuration description changed: yes Firmware changed: no Version 1.0.3.0: ID: 467155 Module documentation revised Data sheet V 3.22 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7063_1.fw(560), 1\7063_5.fw(816) Version 1.0.2.4: ID: 393460 Enhancement online-help files Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7063_1.fw(560), 1\7063_5.fw(816) Version 1.0.2.3: ID: 393015 Enhancementspacked data point for outputs Channel description changed: Yes Configuration description changed: No Firmware changed: No Firmware: 1\7063_1.fw(560), 1\7063_5.fw(816) Version 1.0.2.2: ID: 366269 APROL entries revised Datapoint OSPValid corrected Channel description changed: Yes Configuration description changed: No Firmware changed: No Firmware: 1\7063_1.fw(560), 1\7063_5.fw(816) Version 1.0.2.0: ID: 317670 Additional function model "OSP mode" OSP -Output Set Predefined In OSP mode, the user defines the output behavior in case of connection loss between PLC and module. In doing so the powersupply of the module must be assured. Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\7063_1.fw(560), 1\7063_5.fw(816) Version 1.0.1.0: ID:217455 Adaptation UART Re-Init Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\7063_1.fw(560), 1\7063_5.fw(800) Version 1.0.0.1: ID: 211275 Display correction in IO-Map on SGC Targets Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7063_1.fw(530) |
|||||
| Version | Langue | Système d'exploitation | Date | Taille | Type | Téléchargement |
| 1.2.0.0 | * | 23/07/2021 | 721 Ko | EXE | AS4_HW_X20DO4322.exe | |
| Description |
V4.0 HW Upgrade (X20DO4322) Revision information X20DO4322 Version 1.2.0.0: ID: Adaptations for Automation Studio 4.11 Channel description changed: no Configuration description changed: yes Firmware changed: no Version 1.1.0.0: ID: Adaptations for Automation Studio 4.8 Channel description changed: no Configuration description changed: yes Firmware changed: no Version 1.0.3.0: ID: 467155 Module documentation revised Data sheet V 3.22 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7063_1.fw(560), 1\7063_5.fw(816) Version 1.0.2.4: ID: 393460 Enhancement online-help files Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7063_1.fw(560), 1\7063_5.fw(816) Version 1.0.2.3: ID: 393015 Enhancements packed data point for outputs Channel description changed: Yes Configuration description changed: No Firmware changed: No Firmware: 1\7063_1.fw(560), 1\7063_5.fw(816) Version 1.0.2.2: ID: 366269 APROL entries revised Datapoint OSPValid corrected Channel description changed: Yes Configuration description changed: No Firmware changed: No Firmware: 1\7063_1.fw(560), 1\7063_5.fw(816) Version 1.0.2.0: ID: 317670 Additional function model "OSP mode" OSP - Output Set Predefined In OSP mode, the user defines the output behavior in case of connection loss between PLC and module. In doing so the power supply of the module must be assured. Channel description changed: Yes Configurationdescription changed: Yes Firmware changed: Yes Firmware: 1\7063_1.fw(560), 1\7063_5.fw(816) Version 1.0.1.0: ID: 217455 Adaptation UART Re-Init Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\7063_1.fw(560), 1\7063_5.fw(800) Version 1.0.0.1: ID: 211275 Display correction in IO-Map on SGC Targets Channel description changed: No Configuration description changed: No Firmware changed: No Firmware:1\7063_1.fw(530) |
|||||
| Version | Langue | Système d'exploitation | Date | Taille | Type | Téléchargement |
| 1.1.0.0 | * | 25/10/2019 | 717 Ko | EXE | AS4_HW_X20DO4322.exe | |
| Description |
V4.0 HW Upgrade (X20DO4322) Revision information X20DO4322 Version 1.1.0.0: ID: Adaptations for Automation Studio 4.8 Channel description changed: no Configuration description changed: yes Firmware changed: no Version 1.0.3.0: ID: 467155 Module documentation revised Data sheet V 3.22 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7063_1.fw(560), 1\7063_5.fw(816) Version 1.0.2.4: ID: 393460 Enhancement online-help files Channel description changed:No Configuration description changed: No Firmware changed: No Firmware: 1\7063_1.fw(560), 1\7063_5.fw(816) Version 1.0.2.3: ID: 393015 Enhancements packed data point for outputs Channel description changed: Yes Configuration description changed: No Firmware changed: No Firmware: 1\7063_1.fw(560), 1\7063_5.fw(816) Version 1.0.2.2: ID: 366269 APROL entries revised Datapoint OSPValid corrected Channel description changed: Yes Configuration description changed: No Firmware changed: No Firmware: 1\7063_1.fw(560), 1\7063_5.fw(816) Version 1.0.2.0: ID: 317670 Additional functionmodel "OSP mode" OSP - Output Set Predefined In OSP mode, the user defines the output behavior in case of connection loss between PLC and module. In doing so the power supply of the module must be assured. Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\7063_1.fw(560), 1\7063_5.fw(816) Version 1.0.1.0: ID: 217455 Adaptation UART Re-Init Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\7063_1.fw(560), 1\7063_5.fw(800) Version 1.0.0.1: ID: 211275 Display correction in IO-Map on SGC Targets Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7063_1.fw(530) |
|||||
| Version | Langue | Système d'exploitation | Date | Taille | Type | Téléchargement |
| 1.0.3.0 | * | 07/03/2016 | 736 Ko | EXE | AS4_HW_X20DO4322.exe | |
| Description |
V4.0 HW Upgrade (X20DO4322) Revision information X20DO4322 Version 1.0.3.0: ID: 467155 Module documentation revised Data sheet V 3.22 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7063_1.fw(560), 1\7063_5.fw(816) Version 1.0.2.4: ID: 393460 Enhancement online-help files Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7063_1.fw(560), 1\7063_5.fw(816) Version 1.0.2.3: ID: 393015 Enhancements packed data point for outputs Channel description changed: Yes Configuration description changed: No Firmware changed: No Firmware: 1\7063_1.fw(560), 1\7063_5.fw(816) Version 1.0.2.2: ID: 366269 APROL entries revised Datapoint OSPValid corrected Channel description changed: Yes Configuration description changed: No Firmware changed: No Firmware: 1\7063_1.fw(560), 1\7063_5.fw(816) Version 1.0.2.0: ID: 317670 Additional function model "OSP mode" OSP - Output Set Predefined In OSP mode, the user defines the output behavior incase of connection loss between PLC and module. In doing so the power supply of the module must be assured. Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\7063_1.fw(560), 1\7063_5.fw(816) Version 1.0.1.0: ID: 217455 Adaptation UART Re-Init Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\7063_1.fw(560), 1\7063_5.fw(800) Version 1.0.0.1: ID: 211275 Display correction in IO-Map on SGC Targets Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7063_1.fw(530) |
|||||
