DWL@DWL10000014258
Version | Langue | Système d'exploitation | Date | Taille | Type | Téléchargement |
---|---|---|---|---|---|---|
1.62 | * | DOS | 07/07/2004 | 443 KB | ZIP | IPC5000_IPC5600_BIOS_Upgrade_V01_62.zip |
Description |
BIOS Upgrade IPC5000/5600 BIOS Upgrade for IPC5000 and IPC5600 system units. Change(s) - Board temperatur level have been raised Temp. Board Cpu socket from 60 °C to 65 °C Temp. Board I/O from 55 °C to 60 °C - Added new files in SERVICE.zip: 5D510004.FPD 5D520001.FPD 5D521001.FPD 5D521103.FPD 5D521202.FPD 5D521204.FPD 5D521301.FPD 5D550010.FPD 5D551010.FPD |
|||||
Version | Langue | Système d'exploitation | Date | Taille | Type | Téléchargement |
1.61 | * | DOS | 07/07/2004 | 436 KB | ZIP | IPC5000_IPC5600_BIOS_Upgrade_V01_61.zip |
Description |
BIOS Upgrade IPC5000/5600 BIOS Upgrade for IPC5000 and IPC5600 system units. Change(s) - Included FPC003X.bin support in MTC0020.bin. File listning: CONFIG.sys 01.56 AUTOEXEC.bat 01.60 B.bat 01.45 IPC5UPG.exe 01.51 IPC5UPG.cfg 01.61 NEW BURE036.bin 00.36 V.bat 01.45 VGA2009.bin 01.55 VGA1003.bin 01.45 VGA0006.bin 01.46 M.bat 01.45 MTC0020.bin 00.20 NEW XUPGRADE.pdf 01.45 FPC0030.bin 00.30 SERVICE.zip 01.09 |
|||||
Version | Langue | Système d'exploitation | Date | Taille | Type | Téléchargement |
1.59 | * | DOS | 07/07/2004 | 436 KB | ZIP | IPC5000_IPC5600_BIOS_Upgrade_V01_59.zip |
Description |
BIOS Upgrade IPC5000/5600 BIOS Upgrade for IPC5000 and IPC5600 system units. Change(s) Elite BIOS: - Joining Public and Service Version. Service files are in SERVICE.zip - When using e.g. PCI sound cards, it is possible that the IPC stops in Postcode 03h when booting. This is caused by the configuration of the I/O controller (PC97307 or PC87308) and was corrected. Note: When using sound cards, to guarantee compatibility it is also necessary to configure IRQ5 to 'Legacy ISA'. The sound cards listed below with the following Vendor and Device ID apply: VendorID DeviceID ------------------- 12ebh 0003h 1319h 0801h 1274h 1371h 1274h 5000h File listning: CONFIG.sys 01.56 AUTOEXEC.bat 01.58 B.bat 01.45 IPC5UPG.exe 01.51 IPC5UPG.cfg 01.59 NEW BURE036.bin 00.36 NEW V.bat 01.45 VGA2009.bin 01.55 VGA1003.bin 01.45 VGA0006.bin 01.46 M.bat 01.45 MTC0019.bin 00.19 XUPGRADE.pdf 01.45 FPC0029.bin 00.29 SERVICE.zip 01.09 NEW |
|||||
Version | Langue | Système d'exploitation | Date | Taille | Type | Téléchargement |
1.58 | * | DOS | 07/07/2004 | 424 KB | ZIP | IPC5000_IPC5600_BIOS_Upgrade_V01_58.zip |
Description |
BIOS Upgrade IPC5000/5600 BIOS Upgrade for IPC5000 and IPC5600 system units. Change(s) FPC BIOS: - Fixed RS485 communication problem between IPC and FPC. RS485 transmitter switched off after stop bit (TxD). before: RS485 transmitter ------------+ +------------------------ RS485 TxD --------+ +---------------------- +-----+ now: RS485 transmitter ---------------+ +--------------------- RS485 TxD --------+ +---------------------- +-----+ File listning: CONFIG.sys 01.56 AUTOEXEC.bat 01.58 NEW B.bat 01.45 IPC5UPG.exe 01.51 IPC5UPG.cfg 01.57 BURE035.bin 00.35 V.bat 01.45 VGA2009.bin 01.55 VGA1003.bin 01.45 VGA0006.bin 01.46 M.bat 01.45 MTC0019.bin 00.19 XUPGRADE.pdf 01.45 FPC0029.bin 00.29 NEW |
|||||
Version | Langue | Système d'exploitation | Date | Taille | Type | Téléchargement |
1.57 | * | DOS | 07/07/2004 | 424 KB | ZIP | IPC5000_IPC5600_BIOS_Upgrade_V01_57.zip |
Description |
BIOS Upgrade IPC5000/5600 BIOS Upgrade for IPC5000 and IPC5600 system units. Change(s) - Support of the VG469 (PCMCIA) File listning: CONFIG.sys 01.56 AUTOEXEC.bat 01.56 B.bat 01.45 IPC5UPG.exe 01.51 NEW IPC5UPG.cfg 01.57 NEW BURE035.bin 00.35 NEW V.bat 01.45 VGA2009.bin 01.55 VGA1003.bin 01.45 VGA0006.bin 01.46 M.bat 01.45 MTC0019.bin 00.19 FPC0028.bin 00.28 XUPGRADE.pdf 01.45 |
|||||
Version | Langue | Système d'exploitation | Date | Taille | Type | Téléchargement |
1.56 | * | DOS | 07/07/2004 | 418 KB | ZIP | IPC5000_IPC5600_BIOS_Upgrade_V01_56.zip |
Description |
BIOS Upgrade IPC5000/5600 BIOS Upgrade for IPC5000 and IPC5600 system units. Change(s) - There could be problems with the Mkey detection at to intense handling with the Mkeys. MTC repeated a released Mkey. - There could be problems with the fan handling at to intense communication between IPC and MTC. - There could be problems at the MkeyLevel switching in connection with a keyswitch. - The bootmenu was enlarged by the entry: 5. Upgrade FPC only. Now it is also possible to upgrade the FPC-Bios on display units. The reason for this extension: After several changes (256 times) of the displaysettings (e.g. brightness) there could be a memory overrun which has the result that the display will not be detected again. At this case the display will be black. - Fixed error with this BIOS Settings: Onboard Serial Port 1 : [Auto] + OnBoard Serial Port 2 : [Auto] + Boot Up NumLock Status: [Off] ----------------------------------------- Create: NumLock switched on File listning: CONFIG.sys 01.56 NEW AUTOEXEC.bat 01.56 NEW B.bat 01.45 IPC5UPG.exe 01.50 IPC5UPG.cfg 01.56 NEW BURE034.bin 00.34 NEW V.bat 01.45 VGA2009.bin 01.55 VGA1003.bin 01.45 VGA0006.bin 01.46 M.bat 01.45 MTC0019.bin 00.19 NEW FPC0028.bin 00.28 NEW XUPGRADE.pdf 01.45 |
|||||
Version | Langue | Système d'exploitation | Date | Taille | Type | Téléchargement |
1.55 | * | DOS | 07/07/2004 | 411 KB | ZIP | IPC5000_IPC5600_BIOS_Upgrade_V01_55.zip |
Description |
BIOS Upgrade IPC5000/5600 BIOS Upgrade for IPC5000 and IPC5600 system units. Change(s) - Because of sporadically failures of the 65550 the VGA Bios threshold parameter has been changed. File listning: CONFIG.sys 01.45 AUTOEXEC.bat 01.45 B.bat 01.45 IPC5UPG.exe 01.50 IPC5UPG.cfg 01.55 NEW BURE033.bin 00.33 V.bat 01.45 VGA2009.bin 01.55 NEW VGA1003.bin 01.45 VGA0006.bin 01.46 M.bat 01.45 MTC0017.bin 00.17 XUPGRADE.pdf 01.45 |
|||||
Version | Langue | Système d'exploitation | Date | Taille | Type | Téléchargement |
1.54 | * | DOS | 07/07/2004 | 411 KB | ZIP | IPC5000_IPC5600_BIOS_Upgrade_V01_54.zip |
Description |
BIOS Upgrade IPC5000/5600 BIOS Upgrade for IPC5000 and IPC5600 system units. Change(s) - It was not possible to support Mkey Panels without LED register. - Change BIOS setup defaults 'L2 Cache Cacheable Size' from '64MB' to '512MB'. - New Bios Flash Support (CAT28F001N-12T) with the new Upgrade Tool. File listning: CONFIG.sys 01.45 AUTOEXEC.bat 01.45 B.bat 01.45 IPC5UPG.exe 01.50 NEW IPC5UPG.cfg 01.54 NEW BURE033.bin 00.33 NEW V.bat 01.45 VGA2008.bin 01.51 VGA1003.bin 01.45 VGA0006.bin 01.46 M.bat 01.45 MTC0017.bin 00.17 NEW XUPGRADE.pdf 01.45 |
|||||
Version | Langue | Système d'exploitation | Date | Taille | Type | Téléchargement |
1.53 | * | DOS | 07/07/2004 | 411 KB | ZIP | IPC5000_IPC5600_BIOS_Upgrade_V01_53.zip |
Description |
BIOS Upgrade IPC5000/5600 BIOS Upgrade for IPC5000 and IPC5600 system units. Change(s) - It was possible that the Num-Lock key could not be turn on/off after a new boot. - There could be troubles in the control of the I/O controller PC97307 at to intense communication between MTC and Panel. File listning: CONFIG.sys 01.45 AUTOEXEC.bat 01.45 B.bat 01.45 IPC5UPG.exe 01.49 IPC5UPG.cfg 01.53 NEW BURE032.bin 00.32 V.bat 01.45 VGA2008.bin 01.51 VGA1003.bin 01.45 VGA0006.bin 01.46 M.bat 01.45 MTC0016.bin 00.16 NEW XUPGRADE.pdf 01.45 |
|||||
Version | Langue | Système d'exploitation | Date | Taille | Type | Téléchargement |
1.52 | * | DOS | 07/07/2004 | 410 KB | ZIP | IPC5000_IPC5600_BIOS_Upgrade_V01_52.zip |
Description |
BIOS Upgrade IPC5000/5600 BIOS Upgrade for IPC5000 and IPC5600 system units. Change(s) - There could be problems with the RS485 communication (Panellink) to the Panel at to intense communication between IPC and MTC. File listning: CONFIG.sys 01.45 AUTOEXEC.bat 01.45 B.bat 01.45 IPC5UPG.exe 01.49 IPC5UPG.cfg 01.52 NEW BURE032.bin 00.32 V.bat 01.45 VGA2008.bin 01.51 VGA1003.bin 01.45 VGA0006.bin 01.46 M.bat 01.45 MTC0015.bin 00.15 NEW XUPGRADE.pdf 01.45 |
|||||
Version | Langue | Système d'exploitation | Date | Taille | Type | Téléchargement |
1.51 | * | DOS | 07/07/2004 | 410 KB | ZIP | IPC5000_IPC5600_BIOS_Upgrade_V01_51.zip |
Description |
BIOS Upgrade IPC5000/5600 BIOS Upgrade for IPC5000 and IPC5600 system units. Change(s) - In spite of deactivation the PS/2 mouse at the bios setup the mouse was not deactivate at the system with the I/O controller PC97307. - New VGA Bios (VGA2008.BIN) with new parameter for the 18 inch Panels. File listning: CONFIG.sys 01.45 AUTOEXEC.bat 01.45 B.bat 01.45 IPC5UPG.exe 01.49 IPC5UPG.cfg 01.51 BURE032.bin 00.32 V.bat 01.45 VGA2008.bin 01.51 VGA1003.bin 01.45 VGA0006.bin 01.46 M.bat 01.45 MTC0014.bin 00.14 XUPGRADE.pdf 01.45 |