cULus HazLoc E180196 Industrial control equipment for hazardous locations Class I, Division 2, Groups ABCD, T4
DNV
Temperature: B (0 - 55°C) Humidity: B (up to 100%) Vibration: A (0.7 g) EMC: B (bridge and open deck)
LR
ENV3
ABS
Yes
BV
EC31B Temperature: 5 - 55°C Vibration: 0.7 g EMC: Bridge and open deck
EAC
Product family certification
Controller
FRAM
Size
32 kB
Data retention
10 years
Read/Write endurance
Min. 1012 times/byte
Remanent variables in power failure mode
32 kB (for e.g. Automation Runtime, see Automation Help)
Interfaces
COM
Quantity
1
Type
RS485, not galvanically isolated
Variant
10-pin, male
UART
16550-compatible, 16-byte FIFO buffer
Max. baud rate
115 kbit/s
POWERLINK
Quantity
1
Type
Type 4
Variant
RJ45, shielded
Transfer rate
100 Mbit/s
Transfer
100BASE-TX
Line length
Max. 100 m between two stations (segment length)
CAN
Quantity
1
Variant
10-pin, male, not galvanically isolated
Transfer rate
Max. 1 Mbit/s
Terminating resistor
Type
Can be switched on and off with slide switch
Default setting
Off
Electrical properties
Power consumption
1.75 W
Operating conditions
Pollution degree per EN 61131-2
Pollution degree 2
Ambient conditions
Temperature
Operation
-20 to 55°C
Storage
-20 to 60°C
Transport
-20 to 60°C
Relative humidity
Operation
5 to 90%, non-condensing
Storage
5 to 95%, non-condensing
Transport
5 to 95%, non-condensing
Mechanical properties
Weight
25 g
Référence produit:
5ACCIF01.FPCS-000
Description:
Interface card - 1x RS485 interface - 1x CAN interface - 1x POWERLINK interface - 32 kB FRAM - For APC2100/PPC2100/APC2200/PPC2200 - Only available with a new device