8AC125.61-2

General information

Module type	ACOPOS plug-in module
B&R ID code	0xBD5A
Slot	Slots 2, 3 and 4
Max. power consumption	5.8 W
Certifications
CE	Yes
UL	cULus E225616 Power conversion equipment
KC	Yes

Encoder connection

Module-side connection	9-pin female DSUB
Status indicators	UP/DN LEDs
Electrical isolation
Encoder - ACOPOS	No
Encoder monitoring	Yes
Max. encoder cable length	100m Depends on the cross section of the power supply wires of the encoder cable

Encoder power supply

Output voltage	Typ. 12 V
Load capacity	350 mA
Protective measures
Overload-proof	Yes
Short-circuit proof	Yes

Synchronous serial interface

Signal transmission	RS485
Baud rate	6.25 Mbit/s

Ambient conditions

Temperature
Operation
Nominal	5 to 40°C
Maximum	55°C
Storage	-25 to 55°C
Transport	-25 to 70°C
Relative humidity
Operation	5 to 85%
Storage	5 to 95%
Transport	Max. 95% at 40°C

Malzeme Numarası:

8AC125.61-2

Açıklama:

BiSS encoder interface (Mode C) for installation in ACOPOS servo drives
6.25 Mbit/s, 12 V encoder supply
Encoder monitoring

ACOPOS plug-in module, BiSS encoder interface 12 V, baud rate 6.25 Mbit/s

Automation Studio Donanım Güncellemeleri	Version (Date)	Download
V3.0 HW Upgrade (8AC125.61-2)		EXE / 567 KB Login for download
V4.0 HW Upgrade (8AC125.61-2)		EXE / 376 KB Login for download

Dokümantasyon	Version (Date)	Download
ACOPOS User´s Manual		PDF / 53 MB Login for download
Datasheet 8AC125.61-2		PDF / 470 KB Login for download

Sertifikalar	Version (Date)	Download
ACOPOS KC certificates		ZIP / 601 KB Login for download
Declaration Servos ACOPOS		PDF / 304 KB Login for download
Declaration of conformity Servos		PDF / 163 KB Login for download
E225616 UL Certificate of Compliance ACOPOS		PDF / 242 KB Login for download