8CM010.12-3

Cable cross section	4 x 4 mm² + 2 x 0.75 mm² + 2 x 1 mm²
Durability	Oil resistance per HD 22.10 appendix A and DIN EN 60811-404
Certification	E170315 cRUus AWM STYLE 21223 AWM I/II A/B 80°C 1000 V FT1
Certifications
CE	Yes
UL	cULus E225616 Power conversion equipment
EAC	Yes

Power lines
Quantity	4
Wire insulation	PP
Wire colors	Black, brown, blue, yellow/green
Variant	Tinned copper stranded wire
Cross section	4 mm²
Shield	No
Stranding	No
Signal line
Quantity	4
Wire insulation	PP
Wire colors	White, white/red, white/blue, white/green
Variant	Tinned copper stranded wire
Cross section	2 x 0.75 mm² + 2 x 1 mm²
Shield	Individually shielded in pairs, tinned copper braiding, optical coverage > 85% and foil shield
Stranding	White with white/red and white/blue with white/green
Cable stranding	With filler elements and foil shield
Cable shield	Tinned copper braiding, optical coverage > 85% and foil shield
Outer jacket
Material	TPU
Color	Orange, similar to RAL 2003 flat
Labeling	B&R 4 G 4 + (2x0.75)C + (2x1)C C E170315 cRUus AWM STYLE 21223 AWM I/II A/B 80°C 1000 V FT1

Type	8-pin female speedtec motor connector, size 1.0
Mating cycles	<500
Contacts	8 (4 power and 4 signal contacts)
Degree of protection per EN 60529	IP66/67 when connected

Operating voltage	Max. 1000 V AC (UL)
Test voltage
Wire - Wire	4 kV
Wire - Shield	4 kV
Conductor resistance
Power lines	≤5.1 Ω/km
Signal line	0.75 mm²: ≤26.7 Ω/km, 1 mm²: ≤20 Ω/km
Insulation resistance	≥500 MΩ*km
Current-carrying capacity per DIN VDE 0298 part 4, table 11
Wall mounting	30 A
Installed in conduit or cable duct	30 A
Installed in cable tray	30 A

Dimensions
Length	10 m
Diameter	15.4 mm ±0.4 mm
Bend radius
Single bend	>48 mm
Moving	>119 mm
Drag chain data
Acceleration	Max. 50 m/s² (depends on the length of the travel path)
Flex cycles	≥5,000,000
Velocity	Max. 300 m/min
Weight	2.8 kg

8CM010.12-3

Can be used in cable drag chains
Assembled specifically for use with ACOPOS 1180/1320 servo drives and B&R servo motors with motor connector size 1

Motor cable, length 10 m, 4x 4 mm² + 2x 0.75 mm² + 2x 1 mm², 8-pin female Intercontec motor connector size 1, can be used in cable drag chains

Dokümantasyon	Version (Date)	Download
ACOPOS User´s Manual		PDF / 53 MB Login for download
Datasheet 8CM010.12-3		PDF / 166 KB Login for download

Sertifikalar	Version (Date)	Download
Declaration Servos ACOPOS		PDF / 304 KB Login for download
Declaration of conformity Servos		PDF / 163 KB Login for download
E225616 UL Certificate of Compliance ACOPOS		PDF / 242 KB Login for download