5ACCIF01.FPSC-001

General information
LEDs L1, L2, L3
B&R ID code 0xE9BC
Certifications
CE Yes
UKCA Yes
UL cULus E115267
Industrial control equipment
HazLoc cULus HazLoc E180196
Industrial control equipment
for hazardous locations
Class I, Division 2, Groups ABCD, T4
DNV Temperature: B (0 - 55°C)
Humidity: B (up to 100%)
Vibration: A (0.7 g)
EMC: B (bridge and open deck)
LR ENV3
KR Yes
ABS Yes
BV EC31B
Temperature: 5 - 55°C
Vibration: 0.7 g
EMC: Bridge and open deck
Controller
nvSRAM
Size 512 kB
Data retention 20 years
Read/Write endurance Min. 1,000,000
Remanent variables in power failure mode 256 kB (for e.g. Automation Runtime, see Automation Help)
Interfaces
COM
Quantity 1
Type RS232, modem not supported, not galvanically isolated
Variant 10-pin, male
UART 16550-compatible, 16-byte FIFO buffer
Max. baud rate 115 kbit/s
POWERLINK
Quantity 1
Type Type 4
Variant RJ45, shielded
Transfer rate 100 Mbit/s
Transfer 100BASE-TX
Line length Max. 100 m between two stations (segment length)
CAN
Quantity 1
Variant 10-pin, male, galvanically isolated
Transfer rate Max. 1 Mbit/s
Terminating resistor
Type Can be switched on and off with slide switch
Default setting Off
X2X
Type X2X Link master
Quantity 1
Variant 10-pin, male, galvanically isolated
Electrical properties
Power consumption 2 W
Operating conditions
Pollution degree per EN 61131-2 Pollution degree 2
Ambient conditions
Temperature
Operation -20 to 55°C
Storage -20 to 60°C
Transport -20 to 60°C
Relative humidity
Operation 5 to 90%, non-condensing
Storage 5 to 95%, non-condensing
Transport 5 to 95%, non-condensing
Mechanical properties
Weight 25 g
Номер модель:
5ACCIF01.FPSC-001
Описание:
  • 1x POWERLINK interface managing or controlled node
  • 1x CAN bus master interface
  • 1x X2X Link master interface
  • 1x RS232 interface
  • 512 kB nvSRAM
  • Compatible with APC2100/PC2100 and APC2200/PPC2200

Interface option 5ACCIF01.FPSC-001 is equipped with a POWERLINK, RS232, CAN bus master and X2X Link master interface. In addition, 512 kB nvSRAM is installed.

Дополнительные аксессуары
Terminal blocks
0TB1210.3100 Connector 300 VDC - 10-pin female - Cage clamp terminal block - Protected against vibration by the screw flange
E-CAD (Electro или EPLAN шаблоны) Версия (Дата) Загрузка
APC EPLAN P8 from V2.4 EXE / 99 МБ
Документация Версия (Дата) Загрузка
Automation PC 2100 User's manual PDF / 28 МБ
Automation PC 2200 User's manual PDF / 12 МБ
Panel PC 2100 (AP5000) Swing arm devices user's manual PDF / 44 МБ
Panel PC 2200 (AP5000) swing arm devices user's manual PDF / 29 МБ
Panel PC 2200 Panel mount devices User's manual PDF / 21 МБ
Обновление Automation Studio HW Версия (Дата) Загрузка
V4.0 HW Upgrade (5ACCIF01.FPSC-001) EXE / 645 кБ
V4.1 HW Upgrade (5ACCIF01.FPSC-001) EXE / 904 кБ
V6.0 HW Upgrade (5ACCIF01.FPSC-001) EXE / 920 кБ
Обновление прошивки Версия (Дата) Загрузка
APC2100 Firmware Upgrade (MTCX, SDLT, SDL3T) ZIP / 2 МБ
PPC2100 Firmware Upgrade (MTCX) ZIP / 4 МБ
Сертификаты Версия (Дата) Загрузка
CCS Type Approval Certificate - Automation PCs, Panel PCs and Panels PDF / 471 кБ

Укажите страну и язык

B&R Logo