Short description
Stepper motor | Stepper motor flange size 87.1 mm, length 98 mm |
General information
Certifications | |
CE | Yes |
UKCA | Yes |
Specific motor data
Wiring | |
Serial |
|
Parallel |
|
Current | |
Series wiring | 5 A |
Parallel wiring | 10 A |
Resistance/Phase | |
Series wiring | 0.9 Ω |
Parallel wiring | 0.2 Ω |
Inductance/Phase | |
Series wiring | 5.6 mH |
Parallel wiring | 1.4 mH |
Stall torque | 6.3 Nm |
Holding torque | 9.5 Nm |
Detent torque | <320 mNm |
Rotor inertia | Approx. 2.61 kgcm2 |
General motor data
Protection class | IP40 |
Stepping angle | 1.8° |
Max. surface temperature | 100°C |
Average period of operation between failures | 20,000 hours |
Cable length | 300 mm |
Cable cross section | 22 AWG, UL 3266 |
Shaft type | With key |
Insulation class | B (130°C) |
Insulation resistance | 100 MΩ min. 500 VDC |
Dielectric resistance | 1776 VAC for 1 minute |
Driver supply voltage | Max. 80 VDC |
Ambient conditions
Temperature | |
Operation | -20 to 40°C |
Storage | -30 to 85°C |
Transport | -30 to 85°C |
Relative humidity | |
Operation | 5 to 95%, non-condensing |
Storage | 5 to 95%, non-condensing |
Transport | 5 to 95%, non-condensing |
Número do material:
80MPH4.500S000-01Descrição:
2-phase hybrid stepper motor, 87.1 mm flange, length 98 mm, 5 A serial / 10 A parallel, 9.5 Nm holding torque, 6.3 Nm stall torque
Acessórios opcionais
Accessories
80XMPHXRE.W1-10 | IP expansion and wiring clamp for stepper motors in the 80MPH series, IP65, 10 units per package |
Certificados | Version (Data) | Download |
---|---|---|
E360421 UL Certificate of Compliance 80MPH | PDF / 113 KB | |
EU Declaration Motors Hybrid | PDF / 301 KB | |
UK Declaration Motors Hybrid | PDF / 107 KB |
Documentação | Version (Data) | Download |
---|---|---|
Stepper motors user's manual | PDF / 49 MB |