Please choose country and language

General information
LEDs Power/User, CF
Battery
Type Renata 950 mAh
Service life 4 years
Removable Yes, accessible from the outside
Backup capacitor
Buffer time 10 min
Variant Lithium Ion
Power button No
Reset button Yes
Certifications
CE Yes
EAC Yes
UL cULus E115267
Industrial control equipment
Controller
Bootloader Automation Runtime
Processor
Type Geode SC2200
Clock frequency 266 MHz
L1 cache 16 kB
L2 cache -
Expanded command set MMX technology, streaming SIMD extension
Floating point unit (FPU) Yes
Flash 4 MB (for firmware)
Cooling Passive via heat sink
Mode/Node switches 2, 16 digits each
Watchdog SMC
Real-time clock
Accuracy At 25°C: typ. 10 ppm (1 seconds) per day
Battery-backed Yes
Power failure logic
Controller SMC
Buffer time 10 ms
Graphics
Controller Geode SC2200
Memory -
SRAM
Size 256 kB
Battery-backed Yes
Display
Type -
Diagonal -
Colors -
Resolution -
Contrast -
Viewing angles
Horizontal -
Vertical -
Backlight
Brightness -
Half-brightness time -
Filter glass
Transmittance -
Anti-glare coating -
Touch screen
Type -
Technology -
Controller -
Transmittance -
Interfaces
COM1
Type RS232, modem-capable, not electrically isolated
Variant 9-pin DSUB plug
UART 16550-compatible, 16-byte FIFO
Max. baud rate 115 kbit/s
CompactFlash slot 1
Type Type I
USB
Quantity 2
Type USB 1.1
Variant Type A
Transfer rate Low speed (1.5 Mbit/s), full speed (12 Mbit/s)
Current-carrying capacity Max. 500mA per connection
Ethernet
Quantity 1
Controller MacPhyter DP83816
Transfer rate 10/100 Mbit/s
Max. baud rate 100 Mbit/s
Keys
Function keys No
Soft keys No
System keys No
Service life -
Slots
aPCI slots 2
Electrical properties
Nominal voltage 24 VDC ±25%
Bleeder resistance ≥ 47 kΩ
Inrush current Max. 20 A for < 1 ms
Power consumption Typ. 12 W, max. 17 W
Galvanic isolation Yes
Operating conditions
Degree of protection per EN 60529 IP20 back side (only with installed CompactFlash card)
Ambient conditions
Temperature
Operation 0 to 50°C
Storage -20 to 80°C
Transport -20 to 80°C
Vibration
Operation (continuous) 2 to 9 Hz: 1.75 mm amplitude / 9 to 200 Hz: 0.5 g
Operation (occasional) 2 to 9 Hz: 3.5 mm amplitude / 9 to 200 Hz: 1 g
Storage 2 to 8 Hz: 7.5 mm amplitude / 8 to 200 Hz: 2 g / 200 to 500 Hz: 4 g
Transport 2 to 8 Hz: 7.5 mm amplitude / 8 to 200 Hz: 2 g / 200 to 500 Hz: 4 g
Shock
Operation 15 g, 11 ms
Storage 30 g, 15 ms
Transport 30 g, 15 ms
Elevation
Operation Max. 3000 m
Mechanical properties
Housing
Material Metal
Front
Frame -
Design -
Panel overlay
Material -
Gasket -
Dimensions
Width 230 mm
Height 146 mm
Depth 80.5 mm
Weight 1400 g
Material number:
4PP210.0000-95
Description:
Power Panel Controller PP210 Compact Flash slot (type I), ETH 10/100, RS 232, 2xUSB; 64 MB SDRAM; 2 aPCI slots; 256 kB SRAM; battery; metal housing; 24 V DC. Order power connector separately (screw clamp: 0TB103.9, cage clamp 0TB103.91).
Mandatory Accessories
Accessories
0TB103.9 Connector 24 VDC - 3-pin, female - Screw clamp terminal block 3.31 mm²
0TB103.91 Connector 24 VDC - 3-pin, female - Cage clamp terminal block 3.31 mm²
CompactFlash cards
5CFCRD.0064-03 CompactFlash 64 MB Western Digital (SLC)
5CFCRD.0128-03 CompactFlash 128 MB Western Digital (SLC)
5CFCRD.0256-03 CompactFlash 256 MB Western Digital (SLC)
5CFCRD.0512-03 CompactFlash 512 MB Western Digital (SLC)
5CFCRD.1024-03 CompactFlash 1 GB Western Digital (SLC)
5CFCRD.2048-03 CompactFlash 2 GB Western Digital (SLC)
5CFCRD.4096-03 CompactFlash 4 GB Western Digital (SLC)
5CFCRD.8192-03 CompactFlash 8 GB Western Digital (SLC)
Optional Accessories
Batteries
0AC201.91 Lithium batteries 4 pcs., 3 V / 950 mAh button cell
4A0006.00-000 Lithium battery, 3 V / 950 mAh, button cell
CAN bus
3IF772.9 aPCI interface module, 1 RS232 interface, 2 CAN bus interfaces, electrically isolated, network-capable, max. 500 kbit/s, object buffer in transmit and receive direction, order 2x 0TB704.9 terminal blocks separately.
POWERLINK
3IF786.9 aPCI interface module, 1 POWERLINK interface, manager or controller function, 1 RS232 interface
3IF786.9-1 aPCI interface module, 1 POWERLINK interface, managing or controlled node, 1 RS232 interface
3IF787.9 aPCI interface module, 1 POWERLINK interface, managing or controlled node, 1 CAN bus interface, max. 500 kbps, object buffer in the transmit and receive directions, network-capable, electrically isolated, order 1x terminal block TB704 separately!
3IF787.9-1 aPCI interface module, 1 POWERLINK interface, managing or controlled node, 1 CAN interface, electrically isolated, network-capable, max. 500 kbit/s, object buffer in transmit and receive direction, order 1x TB704 terminal block separately
3IF789.9 aPCI interface module, 1 POWERLINK interface, manager or controller function, 1 X2X Link master interface, electrically isolated, order terminal block TB704 separately!
3IF789.9-1 aPCI interface module, 1 POWERLINK interface, managing or controlled node, 1 X2X Link master interface, electrically isolated, order 1x terminal block TB704 separately!
3IF789.9-11 aPCI interface module, 1 POWERLINK interface, managing or controlled node, type 3, 1 X2X Link master interface, electrically isolated, order 1x TB704 terminal block separately.
PROFINET
3IF7E3.9 aPCI interface module, 1 PROFINET RT device (slave) interface
USB accessories
5MMUSB.2048-01 USB 2.0 flash drive 2048 MB B&R
Undefined
4AC200.1000-00 Cover for aPCI slot
Documentation Version (Date) Download
Power Panel 100/200 User's Manual PDF / 25 MB
M-CAD (Mechan. Templates) Version (Date) Download
3D file DXF/STEP 4PP210.0000-95 ZIP / 2 MB
Dimensions pdf 4PP210.0000-95 PDF / 335 KB

Please choose country and language

B&R Logo