4PP210.0000-95

General information

LEDs	Power/User, CF
Battery
Type	Renata 950 mAh
Service life	4 years
Removable	Yes, accessible from the outside
Backup capacitor
Buffer time	10 min
Variant	Lithium ion
Power button	No
Reset button	Yes
Certifications
CE	Yes
UKCA	Yes
UL	cULus E115267 Industrial control equipment
EAC	Yes

Controller

Bootloader	Automation Runtime
Processor
Type	Geode SC2200
Clock frequency	266 MHz
L1 cache	16 kB
L2 cache	-
Expanded command set	MMX technology, streaming SIMD extension
Floating point unit (FPU)	Yes
Flash	4 MB (for firmware)
Cooling	Passive via heat sink
Mode/Node switches	2, 16 positions each
Watchdog	SMC
Real-time clock
Accuracy	At 25°C: Typ. 10 ppm (1 second) per day
Battery-backed	Yes
Power failure logic
Controller	SMC
Buffer time	10 ms
Graphics
Controller	Geode SC2200
Memory	-
SRAM
Size	256 kB
Battery-backed	Yes

Display

Type	-
Diagonal	-
Colors	-
Resolution	-
Contrast	-
Viewing angles
Horizontal	-
Vertical	-
Backlight
Brightness	-
Half-brightness time	-
Filter glass
Transmittance	-
Anti-glare coating	-
Touch screen
Type	-
Technology	-
Controller	-
Transmittance	-

Interfaces

COM1
Type	RS232, modem supported, not galvanically isolated
Variant	9-pin male DSUB connector
UART	16550-compatible, 16-byte FIFO buffer
Max. baud rate	115 kbit/s
CompactFlash slot 1
Type	Type I
USB
Quantity	2
Type	USB 1.1
Variant	Type A
Transfer rate	Low speed (1.5 Mbit/s), full speed (12 Mbit/s)
Current-carrying capacity	Max. 500 mA per connection
Ethernet
Quantity	1
Controller	MacPhyter DP83816
Transfer rate	10/100 Mbit/s
Max. baud rate	100 Mbit/s

Keys

Function keys	No
Soft keys	No
System keys	No
Service life	-

Slots

aPCI slots	2

Electrical properties

Nominal voltage	24 VDC ±25%
Bleeder resistance	≥47 kΩ
Inrush current	Max. 20 A for < 1 ms
Power consumption	Typ. 12 W, max. 17 W
Galvanic isolation	Yes

Operating conditions

Degree of protection per EN 60529	Back: IP20 (only with connected CF card)

Ambient conditions

Temperature
Operation	0 to 50°C
Storage	-20 to 80°C
Transport	-20 to 80°C
Vibration
Operation (continuous)	2 to 9 Hz: 1.75 mm amplitude / 9 to 200 Hz: 0.5 g
Operation (occasional)	2 to 9 Hz: 3.5 mm amplitude / 9 to 200 Hz: 1 g
Storage	2 to 8 Hz: 7.5 mm amplitude / 8 to 200 Hz: 2 g / 200 to 500 Hz: 4 g
Transport	2 to 8 Hz: 7.5 mm amplitude / 8 to 200 Hz: 2 g / 200 to 500 Hz: 4 g
Shock
Operation	15 g, 11 ms
Storage	30 g, 15 ms
Transport	30 g, 15 ms
Elevation
Operation	Max. 3000 m

Mechanical properties

Housing
Material	Metal
Front
Frame	-
Design	-
Panel overlay
Material	-
Gasket	-
Dimensions
Width	230 mm
Height	146 mm
Depth	80.5 mm
Weight	1400 g

Número do material:

4PP210.0000-95

Descrição:

Power Panel controller PP210 CompactFlash slot (type I), ETH 10/100, RS232, 2xUSB, 64 MB SDRAM, 2 aPCI slots, 256 kB SRAM, battery, metal housing, 24 VDC. Order connector for power supply separately (screw clamp terminal block: 0TB103.9, cage clamp terminal block: 0TB103.91).

Acessórios obrigatórios

Accessories

0TB103.9	Connector 24 VDC - 3-pin, female - Screw clamp terminal block 3.31 mm²
0TB103.91	Connector 24 VDC - 3-pin, female - Cage clamp terminal block 3.31 mm²

CompactFlash cards

5CFCRD.0064-03	CompactFlash 64 MB Western Digital (SLC)
5CFCRD.0128-03	CompactFlash 128 MB Western Digital (SLC)
5CFCRD.0256-03	CompactFlash 256 MB Western Digital (SLC)
5CFCRD.0512-03	CompactFlash 512 MB Western Digital (SLC)
5CFCRD.1024-03	CompactFlash 1 GB Western Digital (SLC)
5CFCRD.2048-03	CompactFlash 2 GB Western Digital (SLC)
5CFCRD.4096-03	CompactFlash 4 GB Western Digital (SLC)
5CFCRD.8192-03	CompactFlash 8 GB Western Digital (SLC)

Acessórios opcionais

Batteries

0AC201.91	Lithium batteries 4 pcs., 3 V / 950 mAh button cell
4A0006.00-000	Lithium battery, 3 V / 950 mAh, button cell

POWERLINK

3IF789.9	aPCI interface module, 1 POWERLINK interface, managing or controlled node, 1 X2X Link master interface, electrically isolated, order 1x terminal block TB704 separately!

USB accessories

5MMUSB.2048-01	USB 2.0 flash drive 2048 MB B&R

Undefined

3IF786.9	aPCI interface module, 1 POWERLINK interface module, managing or controlled node, 1 RS232 interface
3IF786.9-1	aPCI interface module, 1 POWERLINK interface, managing or controlled node, 1 RS232 interface
3IF787.9	aPCI interface module, 1 POWERLINK interface, managing or controlled node, 1 CAN bus interface, max. 500 kbps, object buffer in the transmit and receive directions, network-capable, electrically isolated, order 1x terminal block TB704 separately!
3IF787.9-1	aPCI interface module, 1 POWERLINK interface, managing or controlled node 1 CAN bus interface, electrically isolated, network-capable, max. 500 kbit/s, object buffer in transmit and receive directions, order 1x terminal block TB704 separately!
3IF789.9-1	aPCI interface module, 1 POWERLINK interface, managing or controlled node, 1 X2X Link master interface, electrically isolated, order 1x terminal block TB704 separately!
3IF789.9-11	aPCI interface module, 1 POWERLINK interface, managing or controlled node type 3, 1 X2X Link master interface, electrically isolated, order 1x terminal block TB704 separately!
3IF7E3.9	aPCI interface module, 1 PROFINET RT device (slave) interface
4AC200.1000-00	Cover for aPCI slot

aPCI communication modules

3IF772.9	aPCI interface module, 1 RS232 interface, 2 CAN bus interfaces, electrically isolated, network-capable, max. 500 kbit/s, object buffer in transmit and receive direction, order 2x terminal blocks 0TB704.9 separately!

Documentação	Version (Data)	Download
Power Panel 100/200 User's Manual		PDF / 26 MB Login for download

M-CAD (Mechan. Modelos)	Version (Data)	Download
3D file DXF/STEP 4PP210.0000-95		ZIP / 2 MB Login for download
Dimensions pdf 4PP210.0000-95		PDF / 335 KB Login for download