Short description
I/O module 4 inputs for thermocouple sensors
General information
B&R ID code 0x1486
Status indicators I/O function per channel, supply voltage, bus function
Diagnostics
Inputs Yes, using LED status indicator and software
I/O power supply Yes, using LED status indicator and software
Connection type
X2X Link M12, B-coded
Inputs 4x M12, A-coded
I/O power supply M8, 4-pin
Power consumption
Internal I/O 2.6 W
X2X Link power supply 0.75 W
Certifications
CE Yes
UKCA Yes
ATEX Zone 2, II 3G Ex nA IIA T5 Gc
IP67, Ta = 0 - Max. 60°C
TÜV 05 ATEX 7201X
UL cULus E115267
Industrial control equipment
HazLoc cCSAus 244665
Process control equipment
for hazardous locations
Class I, Division 2, Groups ABCD, T5
EAC Yes
KC Yes
I/O power supply
Nominal voltage 24 VDC
Voltage range 18 to 30 VDC
Integrated protection Reverse polarity protection
Thermocouple temperature inputs
Input Thermocouple
Digital converter resolution 16-bit
Filter time Configurable between 2 and 20 ms
Output format INT
Measurement range
Sensor temperature
Type J: Fe-CuNi -210 to 1200°C
Type K: NiCr-Ni -270 to 1372°C
Type N: NiCrSi-NiSi -270 to 1300°C
Type S: PtRh10-Pt -50 to 1768°C
Type R: PtRh13-Pt -50 to 1768°C
Terminal temperature -25 to 85°C
Raw value ±65.534 mV
Terminal temperature compensation Using thermocouple connector X67AC9A02 (accessory)
Sensor standard IEC 60584-1
Resolution
Sensor temperature 1 LSB = 0.1°C
Terminal temperature 1 LSB = 0.1°C
Raw value output with respect to gain 1 LSB = 1 µV or 2 µV
Normalization
Type J: Fe-CuNi -210.0 to 1200.0°C
Type K: NiCr-Ni -270.0 to 1372.0°C
Type N: NiCrSi-NiSi -270.0 to 1300.0°C
Type S: PtRh10-Pt -50.0 to 1768.0°C
Type R: PtRh13-Pt -50.0 to 1768.0°C
Monitoring
Range undershoot 0x8001
Range overshoot 0x7FFF
Open circuit 0x7FFF
Open inputs 0x7FFF
General fault 0x8000
Conversion procedure Sigma-delta
Linearization method Software
Permissible input signal Short-term ±30 VDC
Max. error at 25°C
Gain ±0.040%
Offset
Type T: Cu-CuNi ±0.024%
Type K: NiCr-Ni ±0.030%
Type N: NiCrSi-NiSi ±0.035%
Type S: PtRh10-Pt ±0.088%
Type R: PtRh13-Pt ±0.078%
Max. gain drift 0.0123%/°C
Max. offset drift
Type J: Fe-CuNi 0.0024%/°C
Type K: NiCr-Ni 0.0030%/°C
Type N: NiCrSi-NiSi 0.0035%/°C
Type S: PtRh10-Pt 0.0089%/°C
Type R: PtRh13-Pt 0.0079%/°C
Nonlinearity <0.002%
Common-mode rejection
DC >70 dB
50 Hz >70 dB
Common-mode range ±12 VDC
Crosstalk between channels <-70 dB
Terminal temperature error Typ. ±2°C after 10 min.
Insulation voltage between channel and bus 500 Veff
Conversion time 62 ms per channel with 50 Hz filter + 62 ms per cycle for terminal temperature measurement with 50 Hz filter
Input filter
Cutoff frequency 4 Hz / First-order filter
Slope -20 dB
Electrical properties
Electrical isolation
Channel isolated from bus

Channel not isolated from channel
Operating conditions
Mounting orientation
Any Yes
Installation elevation above sea level
0 to 2000 m No limitation
>2000 m Reduction of ambient temperature by 0.5°C per 100 m
Degree of protection per EN 60529 IP67
Ambient conditions
Temperature
Operation -25 to 60°C
Derating -
Storage -40 to 85°C
Transport -40 to 85°C
Mechanical properties
Dimensions
Width 53 mm
Height 85 mm
Depth 42 mm
Weight 205 g
Torque for connections
M8 Max. 0.4 Nm
M12 Max. 0.6 Nm
Material number:
X67AT1402
Description:
  • 4 inputs for thermocouple sensors
  • Sensor types J, K, N, R and S
  • Additional direct raw value measurement for other sensor types
  • Terminal temperature compensation

The module is a temperature module for type J, K, N, R and S thermocouple sensors. The selected sensor type is used for all 4 inputs.

Automation Studio HW Upgrades Version (Date) Download
V2.6 HW Upgrade (X67AT1402) EXE / 2 MB
V3.0 HW Upgrade (X67AT1402) EXE / 2 MB
V4.0 HW Upgrade (X67AT1402) EXE / 1 MB
Certificates Version (Date) Download
244665 CSA HazLoc CoC X20, X67 PDF / 158 KB
E115267 UL CoC X67 PDF / 155 KB
EU Declaration ATEX X67 PDF / 191 KB
EU Declaration PLC X67 PDF / 674 KB
TÜV 05 ATEX 7201 X PDF / 5 MB
UK Declaration PLC X67 PDF / 469 KB
X20, X67 KC certificates PDF / 6 MB
Documentation Version (Date) Download
Datasheet X67AT1402 PDF / 398 KB
Installation- / EMC-Guide PDF / 20 MB
X67 System User´s Manual PDF / 6 MB
E-CAD (Electro or EPLAN Templates) Version (Date) Download
X67 EPLAN P8 from V2.4 EXE / 105 MB
M-CAD (Mechan. Templates) Version (Date) Download
3D File DXF/STEP X67 ZIP / 4 MB

Please choose country and language

B&R Logo