8FLI41.3232.00I-1

General information

Certifications
CE	Yes
CRA (Cyber Resilience Act)	In preparation
CSA	cCSAus 305307

Power connection

Power supply	Power supply only in conjunction with 80PS080X3.10-01 and 8F1OA.01B.0000-1 or 8B0C0320Hx00.B00-1
Input voltage	48 to 58 VDC
Input current	Max. 28 A
Max. line length	10 m
Max. power consumption	1500 W

DC bus connection

Protective measures
Overload protection	No
Short-circuit and ground fault protection	No

Fieldbus

Type	6D Link
Variant	4x M12, 12-pin male, A-coded with push lock
Line length	0.6 m between adjacent stations 2.8 m from the ACOPOS 6D controller
Transfer rate	-

Enable inputs

Switching threshold
Low	0 to 4 V
High	18 to 30 V

Operating conditions

Mounting orientation
Horizontal	Yes
Installation elevation above sea level
Nominal	0 to 500 m
Maximum	4000 m
Degree of protection per EN 60529	IP65/IP67
Max. motor temperature during operation	Recommended value: 45°C

Ambient conditions

Temperature
Operation
Nominal	5 to 40°C
Storage	-25 to 55°C
Transport	-25 to 70°C
Relative humidity
Operation	5 to 85%, non-condensing
Storage	5 to 95%
Transport	95% at 40°C

Mechanical properties

Dimensions
Width	319.7 mm
Length	319.7 mm
Height	80 mm
Weight	14 kg
Max. tightening torque	Screw thread M5x0.8 mm, min. 5 mm thread depth: 8 Nm Screw thread M8x1.25 mm, min. 10 mm thread depth: 30 Nm

Cooling

Options	Passive, air convection or liquid cooling
Water cooling
Inlet/outlet fittings	Push-to-connect, hose: Outer diameter 10 mm
Maximum pressure	3.4 bar
Flow factor K_v (single segment)	0.44 m³/h
Maximum recommended number of serially cooled segments	8 segments
Compatible fluids	Distilled water, EuroTerm 131 (and other liquids that are noncorrosive to aluminum or stainless steel can be used)

Materiálové číslo:

8FLI41.3232.00I-1

Popis:

ACOPOS 6D segment S4 320 x 320 mm, M12 connection for 6D Link, power supply connection M20, cooling connection 10 mm

Dokumentace	Verze (datum)	Ke stažení
ACOPOS 6D S4 user´s manual		PDF / 7 MB Pro stažení je potřeba se přihlásit.
Data sheet 8FLI41.3232.00I-1		PDF / 162 KB Pro stažení je potřeba se přihlásit.