General information
Cable cross section 5x 0.75 mm²
Durability Oil resistance per VDE 0472 Part 803 as well as standard hydraulic oils
Certification UL AWM style 20234, 80°C, 1000 V, E63216 and CSA AWM I/II A/B, 90°C, 1000 V, FT2 LL46064
Certifications
CE Yes
Cable construction
Power lines
Quantity 5
Wire insulation Special thermoplastic material
Wire colors Black, brown, blue, gray, yellow/green
Variant Tinned copper stranded wire
Cross section 0.75 mm²
Stranding No
Cable stranding With filler elements and foil shield
Cable shield Tinned copper braiding, optical coverage > 85% and foil shield
Outer jacket
Material PUR
Color Orange, similar to RAL 2003 flat
Labeling B&R 5x0,75 FLEX UL AWM STYLE 20234 80°C 1000 V E63216 CSA AWM I/II A/B 90°C 1000 V FT2 LL46064
Electrical properties
Test voltage
Wire - Wire 3 kV
Wire - Shield 3 kV
Conductor resistance
Power lines ≤29 Ω/km
Insulation resistance >200 MΩ/km
Current-carrying capacity per DIN VDE 0298 part 4, table 11
Wall mounting 13 A
Installed in conduit or cable duct 11.5 A
Installed in cable tray 13.5 A
Ambient conditions
Temperature
Moving -10 to 70°C
Static -20 to 90°C
Mechanical properties
Dimensions
Length 1 m
Diameter 8.5 mm ±0.3 mm
Bend radius
Single bend >34 mm
Moving ≥85 mm
Drag chain data
Acceleration <60 m/s²
Flex cycles ≥3,000,000
Velocity ≤4 m/s
Weight 0.128 kg/m
Número do material:
80CM01001.21-01
Descrição:
Motor cable, length 1 m, 5x 0.75 mm², 4-pin male connector on the motor side, can be used in cable drag chains, UL listed
Certificados Version (Data) Download
EU Declaration ACOPOSmicro PDF / 126 KB
Documentação Version (Data) Download
Data Sheet motor cable PDF / 525 KB

Por favor escolha o país e o idioma

B&R Logo