8BVF0440H000.001-2

General information
Cooling and mounting type Wall mounting
Certifications
CE Yes
UKCA Yes
UL cULus E225616
Power conversion equipment
KC Yes
Mains connection
Permissible network configurations TT, TN
Mains input voltage 3x 220 to 3x 480 VAC ±10%
Frequency 50 / 60 Hz ±4%
Allocation to power supply module 8BVP0440HC00.000-1
8BVP0440HW00.000-1
Continuous current 45 Aeff
Peak current <10 s 180 Aeff
Reduction of continuous current at ambient temperatures starting at 40°C 0.4 Aeff per °C
Reduction of continuous current depending on installation elevation
Starting at 1000 m above sea level 3.6 Aeff
Power dissipation at nominal current 210 W
Integrated line filter per EN 61800-3, category C3 Yes
Variant
L1, L2, L3, PE and L1´, L2´, L3´, PE Connector
PE M5 threaded bolt
Shield connection
On mains No
On device Yes
Terminal connection cross section
Flexible and fine-stranded wires
With wire end sleeves 0.5 to 16 mm²
Approbation data
UL/C-UL-US 20 to 6 AWG
CSA 20 to 6 AWG
Terminal cable cross section dimension of shield connection 23 to 35 mm
Fan connector
Connection voltage 24 VDC
Max. power consumption during operation (PFan8BVF...) 8.25 W
Variant
F+, F- Connector
Terminal connection cross section
Flexible and fine-stranded wires
With wire end sleeves 0.25 to 2.5 mm²
Approbation data
UL/C-UL-US 30 to 12 AWG
CSA 28 to 12 AWG
Temperature sensor connection
Variant
T+, T- Connector
Terminal connection cross section
Flexible and fine-stranded wires
With wire end sleeves 0.25 to 2.5 mm²
Approbation data
UL/C-UL-US 30 to 12 AWG
CSA 28 to 12 AWG
Electrical properties
Discharge capacitance 14.1 µF
Operating conditions
Permissible mounting orientations
Hanging vertically Yes
Horizontal, face up Yes
Standing horizontally No
Installation elevation above sea level
Nominal 0 to 500 m
Maximum 4000 m
Pollution degree per EN 61800-5-1 2 (non-conductive pollution)
Overvoltage category per EN 61800-5-1 III
Degree of protection per EN 60529 IP20
Ambient conditions
Temperature
Operation
Nominal 5°C to 40°C
Maximum 55°C
Storage -25°C to 55°C
Transport -25°C to 70°C
Relative humidity
Operation 5 to 85%
Storage 5 to 95%
Transport Max. 95% at 40°C
Mechanical properties
Dimensions
Width 135 mm
Height 378 mm
Depth 212 mm
Weight 15 kg
Número do material:
8BVF0440H000.001-2
Descrição:
  • Wide mains input voltage range
  • Optimally suited for ACOPOSmulti 8BVP power supply modules
  • Compliance with limit values per CISPR11, group 2, class A
ACOPOSmulti line filter, 45 A, 480 V, increased peak current carrying capacity
Acessórios obrigatórios
Terminal block sets
8BZVF044000.001-2A Screw clamp terminal block set for ACOPOSmulti 8BVF0220H000.000-1 and 8BVF0440H000.001-2 modules: 1x 8TB4104.202N-10, 1x 8TB4104.206D-10, 1x 8TB2104.204A-00
Acessórios opcionais
Terminal blocks
8TB2104.204A-00 4-pin screw clamp terminal block, 1-row, pitch: 5.08 mm, label 4: T- T+ F- F+, coding A: 0000
8TB4104.202N-10 4-pin screw clamp terminal block, 1-row, pitch: 10.16 mm, label 2: L1 L2 L3 PE, coding N: 1100
8TB4104.206D-10 4-pin screw clamp terminal block, 1-row, pitch: 10.16 mm, label 6: L1' L2' L3' PE, coding D: 0011

Por favor escolha o país e o idioma

B&R Logo