General information
Support | |
Dynamic node allocation (DNA) | Yes |
Slots for plug-in modules | 1 |
Mains connection
24 VDC power supply
Motor connection
Motor holding brake connection
Braking resistor
Peak power int./ext. | 7 kW / 25 kW |
Continuous power int./ext. | 150 W / 2 kW |
Minimum braking resistance (ext.) | 25 Ω |
Enable inputs
Encoder interfaces
Trigger inputs
Quantity | 2 |
Circuit | Sink |
Electrical isolation | |
Input - ACOPOS P3 | Yes |
Input - Input | Yes |
Input voltage | |
Nominal | 24 VDC |
Maximum | 30 VDC |
Switching threshold | |
Low | <5 V |
High | >15 V |
Input current at nominal voltage | Approx. 4 mA |
Switching delay | |
Rising edge | <2 µs |
Falling edge | <1 µs |
Modulation compared to ground potential | Max. ±38 V |
Temperature sensor connection
Quantity | 2 |
Resistance range | 500 Ω to 5 kΩ |
Support
Software | |
ACP10 | V3.12.1 |
Operating conditions
Permissible mounting orientations | |
Hanging vertically | Yes |
Standing horizontally | In preparation |
Installation elevation above sea level | |
Nominal | 0 to 500 m |
Maximum | 4000 m |
Pollution degree per EN 61800-5-1 | 2 (non-conductive pollution) |
Overvoltage category per EN 61800-5-1 | III |
Degree of protection per EN 60529 | IP20 |
Ambient conditions
Mechanical properties
Dimensions | |
Width | 66 mm |
Height | 374 mm |
Depth | |
Wall mounting | 258.5 mm (with 8EXA front cover: 261 mm) |
Weight | 4 kg |
Número do material:
8EI8X8HWD10.0100-1Descrição:
ACOPOS P3 servo drive, 1 digital multi-standard encoder interface per axis, 3x 200-480 VAC, 8.8 A, 2 axes, wall mounting, 2-row connector set
Atualizações de HW Automation Studio | Version (Data) | Download |
---|---|---|
V4.0 HW Upgrade (8EI8X8HWD10.0100-1) | EXE / 558 KB | |
V4.0 HW Upgrade (8EIxxxHxD1x.xxxx-1) | EXE / 557 KB |
Certificados | Version (Data) | Download |
---|---|---|
E225616 UL Certificate of Compliance ACOPOS P3 | PDF / 241 KB |
Documentação | Version (Data) | Download |
---|---|---|
ACOPOS P3 User´s Manual | PDF / 172 MB | |
Datasheet 8EI8X8HWD10.xxxx-1 | PDF / 826 KB |
E-CAD (Modelos Electro ou EPLAN) | Version (Data) | Download |
---|---|---|
ACOPOSp3 EPLAN P8 V2.3 | EXE / 34 MB |
M-CAD (Mechan. Modelos) | Version (Data) | Download |
---|---|---|
3D STEP file 8EIxXxxWD1x.xxxx-1 2-axis modules | ZIP / 1 MB | |
3D STEP file 8EIxXxxWD1x.xxxx-1 2-axis modules with 8EXA200 front cover | ZIP / 1 MB |