General information
| Module type | ACOPOS P3 plug-in module |
| B&R ID code | 0xEA8E |
| Max. power consumption | 1 W |
| Certifications | |
| CE | Yes |
| UKCA | Yes |
| CRA (Cyber Resilience Act) | Not applicable |
| UL |
cULus E225616 Power conversion equipment |
| KC | Yes |
Encoder connection
Encoder power supply
| Output voltage | Typ. 3 Veff |
| Output current | Max. 50 mAeff |
| Frequency | 10 kHz |
| Protective measures | |
| Overload-proof | Yes |
| Short-circuit proof | Yes |
Position
| Resolution @ 1 VSS | Number of pole pairs * 16 bits |
Analog inputs
| Digital converter resolution | 16-bit |
| Input impedance | 10.4 kΩ - j8 kΩ |
| Input voltage | Resolver transformation ratio: 0.2 - 0.55 ±10% |
| Common-mode voltage | Max. ±12 V |
| Signal transmission | Differential signals |
Support
| Motion system | |
| mapp Motion | 5.00.0 and higher |
| ACP10/ARNC0 | 3.11.0 and higher |
Ambient conditions
| Temperature | |
| Operation | |
| Nominal | 5 to 40°C |
| Maximum | 55°C |
| Storage | -25 to 55°C |
| Transport | -25 to 70°C |
| Relative humidity | |
| Operation | 5 to 85% |
| Storage | 5 to 95% |
| Transport | Max. 95% at 40°C |
Mechanical properties
| Dimensions | |
| Width | 24 mm |
| Height | 82 mm |
| Depth | 103 mm |
| Weight | 123 g |
Materiaalnummer:
8EAC0122.001-1Omschrijving:
- Resolver interface for installation in ACOPOS P3 servo drives
- Encoder monitoring
- High resolution
Optionele toebehoren
Resolver cables
| 8ECR0005.1111C-0 | ACOPOS P3 resolver cable, length 5 m, 3x 2x 24 AWG (19x 0.127), 12-pin female speedtec connector, 8-pin male Mini I/O connector, can be used in cable drag chains |
| 8ECR0007.1111C-0 | ACOPOS P3 resolver cable, length 7 m, 3x 2x 24 AWG (19x 0.127), 12-pin female speedtec connector, 8-pin male Mini I/O connector, can be used in cable drag chains |
| 8ECR0008.1111C-0 | ACOPOS P3 resolver cable, length 8 m, 3x 2x 24 AWG (19x 0.127), 12-pin female speedtec connector, 8-pin male Mini I/O connector, can be used in cable drag chains |
| 8ECR0009.1111C-0 | ACOPOS P3 resolver cable, length 9 m, 3x 2x 24 AWG (19x 0.127), 12-pin female speedtec connector, 8-pin male Mini I/O connector, can be used in cable drag chains |
| 8ECR0010.1111C-0 | ACOPOS P3 resolver cable, length 10 m, 3x 2x 24 AWG (19x 0.127), 12-pin female speedtec connector, 8-pin male Mini I/O connector, can be used in cable drag chains |
| 8ECR0012.1111C-0 | ACOPOS P3 resolver cable, length 12 m, 3x 2x 24 AWG (19x 0.127), 12-pin female speedtec connector, 8-pin male Mini I/O connector, can be used in cable drag chains |
| 8ECR0015.1111C-0 | ACOPOS P3 resolver cable, length 15 m, 3x 2x 24 AWG (19x 0.127), 12-pin female speedtec connector, 8-pin male Mini I/O connector, can be used in cable drag chains |
| 8ECR0020.1111C-0 | ACOPOS P3 resolver cable, length 20 m, 3x 2x 24 AWG (19x 0.127), 12-pin female speedtec connector, 8-pin male Mini I/O connector, can be used in cable drag chains |
| 8ECR0025.1111C-0 | ACOPOS P3 resolver cable, length 25 m, 3x 2x 24 AWG (19x 0.127), 12-pin female speedtec connector, 8-pin male Mini I/O connector, can be used in cable drag chains |
| Automation Studio HW Upgrades | Versie (Datum) | Download |
|---|---|---|
| V4.0 HW Upgrade (8EAC0122.001-1) | EXE / 605 KB | |
| V6.0 HW Upgrade (8EAC0122.001-1) | EXE / 605 KB |
| Certificaten | Versie (Datum) | Download |
|---|---|---|
| ACOPOS P3 KC certificates | ZIP / 2 MB | |
| EU Declaration Servos ACOPOS P3 | PDF / 238 KB | |
| UK Declaration Servos ACOPOS P3 | PDF / 126 KB |
| Documentatie | Versie (Datum) | Download |
|---|---|---|
| Datasheet 8EAC0122.001-1 | PDF / 444 KB |