8WSB32.ee004jjQop0

General information

Certifications
CE	Yes
UKCA	Yes
CRA (Cyber Resilience Act)	Not applicable

Motor

Nominal speed n_N [rpm]	5000
Number of pole pairs	4
Nominal torque M_n [Nm]	0.093
Nominal current I_N [A]	1.9
Stall torque M₀ [Nm]	0.1
Stall current I₀ [A]	2
Maximum torque M_max [Nm]	0.2
Maximum current I_max [A]	4.1
Maximum speed n_max [rpm]	8000
Torque constant K_T [Nm/A]	0.056
Voltage constant K_E [V/1000 rpm]	3.55
Stator resistance R_2ph [Ω]	1.3
Stator inductance L_2ph [mH]	1.75
Electrical time constant t_el [ms]	1.35
Thermal time constant t_therm [min]	6.7
Moment of inertia J [kgcm²]	0.0207
Weight without brake m [kg]	0.36

Gearbox

Number of gear stages	1
Gear ratio i	4
Max. drive speed n_1max [rpm]	10000
Max. backlash J_t [arcmin]	20
Torsional rigidity C_t21 [Nm/arcmin]	0.3
Efficiency at full load ŋ [%]	96
Weight m [kg]	0.12

Recommendations

ACOPOSmicro 80VD100Px.xxxx-01	C03X, C033

Materiaalnummer:

8WSB32.ee004jjQop0

Omschrijving:

Synchronous motor 8WSB32 with direct gearbox mounting, SSI encoder, single-turn, gear ratio = 4, smooth shaft, IP54, nominal speed: 5000 rpm, fixed attachment cable 0.5 m with hybrid connector

Vereiste toebehoren

Accessories

8BCM00X5.1B48E-0	8WS/ACOPOSmicro hybrid motor cable, length 0.5 m, ((2x(2x26AWG) + 2x24AWG)C + 3x16AWG)C, 12+3-pin female series 915 hybrid connector, can be used in cable drag chains

Optionele toebehoren

Accessories

8BCM0003.1B470-0	8WS hybrid motor cable extension, length 3 m, ((3x(2x26AWG)+(2x24AWG))C+3x26AWG+3x16AWG)C, 12+3-pin Itec hybrid motor connector, can be used in cable drag chains
8BCM0005.1B470-0	8WS hybrid motor cable extension, length 5 m, ((3x(2x26AWG)+(2x24AWG))C+3x26AWG+3x16AWG)C, 12+3-pin Itec hybrid motor connector, can be used in cable drag chains
8BCM0010.1B470-0	8WS hybrid motor cable extension, length 10 m, ((3x(2x26AWG)+(2x24AWG))C+3x26AWG+3x16AWG)C, 12+3-pin Itec hybrid motor connector, can be used in cable drag chains
8BCM0015.1B470-0	8WS hybrid motor cable extension, length 15 m, ((3x(2x26AWG)+(2x24AWG))C+3x26AWG+3x16AWG)C, 12+3-pin Itec hybrid motor connector, can be used in cable drag chains

Certificaten	Versie (Datum)	Download
E360421 UL Certificate of Compliance 8WS		PDF / 243 KB Login voor downloaden
EU Declaration Motors 8WS		ZIP / 175 KB Login voor downloaden
UK Declaration Motors 8WS		ZIP / 158 KB Login voor downloaden

DT Upgrade	Versie (Datum)	Download
V4.0 DT Upgrade (8WSB32.F0004S0QKB0)		EXE / 609 KB Login voor downloaden
V6.0 DT Upgrade (8WSB32.F0004S0QKB0)		EXE / 581 KB Login voor downloaden

Documentatie	Versie (Datum)	Download
8WS user's manual		PDF / 3 MB Login voor downloaden