8ECH0007.1D42C-0

General information

Cable cross section	4x 4 mm² + 2x 1 mm² + 2x 24 AWG
Durability	Oil resistance per EN 50363-10-2
Certification	E356538 cURus AWM STYLE 21209 90°C 1000 V - AWM I/II A/B 90°C 1000 V FT1 YY/WW
Certifications
CE	Yes
UKCA	Yes

Cable construction

Power lines
Quantity	4
Wire insulation	PP
Wire colors	Black U/L1/C/L+, black V/L2, black W/L3/D/L, yellow/green
Variant	Copper stranded wire
Cross section	4 mm²
Shield	No
Stranding	No
Supply lines
Quantity	2
Wire insulation	PP
Wire colors	White, black
Variant	Copper stranded wire
Cross section	1 mm²
Shield	Shielded tinned wires with copper braiding, optical coverage ≥90%
Stranding	Sheathing with fleece tape, overlap ≥25%
Signal line
Quantity	2
Wire insulation	PP
Wire colors	Blue, white
Variant	2x copper stranded wire
Cross section	2x 24 AWG
Shield	Tinned copper braiding, optical coverage >85% and foil shield
Stranding	Two insulated wires are twisted into a pair.
Cable stranding	With filler elements and foil shield
Cable shield	Tinned copper braiding, optical coverage >85% and foil shield
Outer jacket
Material	PUR
Color	Orange, similar to RAL 2003 flat
Labeling	B&R (4G4.0+1x (2x1.0) + ((2xAWG24))) \| E356538 \|( ) cURus AWM STYLE 21209 90°C 1000 V - AWM I/II A/B 90°C 1000 V FT1 \| YY/WW

Connector

Type	8-pin female speedtec hybrid motor connector
Mating cycles	<500
Contacts	8
Additional connectors	8-pin male Mini I/O encoder connector Mating cycles: <1500 Contacts: 8 Degree of protection per EN 60529: IP30 when connected
Degree of protection per EN 60529	IP66/67 when connected

Electrical properties

Test voltage
Wire - Wire	4 kV
Wire - Shield	4 kV
Conductor resistance
Power lines	≤4.95 Ω/km
Supply lines	≤19.5 Ω/km
Signal line	≤84.2 Ω/km
Insulation resistance	≥2000 MΩ x km
Current-carrying capacity per DIN VDE 0298 part 4, table 11
Wall mounting	30 A
Installed in conduit or cable duct	30 A
Installed in cable tray	30 A

Ambient conditions

Temperature
Moving	-40°C to +90°C
Static	-50°C to +90°C

Mechanical properties

Dimensions
Length	7 m
Diameter	16.20 ±0.30 mm
Bend radius
Single bend	>48.6 mm
Moving	≥121.5 mm
Drag chain data
Acceleration	Max. 50 m/s² (depends on the length of the travel path)
Flex cycles	≤3,000,000
Velocity	Max. 300 m/min
Weight	3.043 kg

Numero materiale:

8ECH0007.1D42C-0

Descrizione:

ACOPOS P3 hybrid motor cable EnDat 3, length 7 m, 4x 4 mm² + 2x 1 mm² + 2x 24 AWG, speedtec 8-pin female motor connector size 1, Mini I/O 8-pin male connector, can be used in cable drag chains

Documentazione	Versione (data)	Download
Datasheet 8ECH0007.1D42C-0		PDF / 525 KB Login per il download