8ECH0015.1A21C-0

General information

Cable cross section	4x 0.75 mm² + 2x 0.34 mm² + 2x 24 AWG
Durability	Oil resistance per EN 50363-10-2
Listed	E170315 cURus AWM STYLE 21209 90°C 1000 V - AWM I/II A/B 90°C 1000 V FT1 YY/WW
Certification
CE	Yes

Cable construction

Power lines
Quantity	4
Wire insulation	PP
Wire colors	Black U/L1/C/L+, black V/L2, black W/L3/D/L, yellow/green
Design	Copper stranded wire
Diameter	0.75 mm²
Shield	No
Stranding	No
Supply lines
Quantity	2
Wire insulation	PP
Wire colors	Black
Design	Copper stranded wire
Diameter	0.34 mm²
Shield	Tinned copper braiding, optical coverage >90% and foil shield
Stranding	2 elements (black no. 5-6) and 2 filling elements
Signal lines
Quantity	2
Wire insulation	PP
Wire colors	Blue, white
Design	2x copper stranded wire
Diameter	2x 24 AWG
Shield	Tinned copper braiding, optical coverage >85% and foil shield
Stranding	Two insulated wires are twisted into a pair.
Cable stranding	With filler elements and foil shield
Complete shielding	Tinned copper braiding, optical coverage >85% and foil shield
Outer sheathing
Material	PUR
Color	Orange, similar to RAL 2003 flat
Labeling	B&R 4 G 0.75 + 1x(2x0.34)C + 1x(2xAWG24)C C E170315 cURus AWM STYLE 21209 AWM I/II A/B 90°C 1000 V FT1 CE

Connector

Type	Series 915 8-pin female hybrid motor connector
Connection cycles	<500
Contacts	8
Additional connectors	8-pin male Mini I/O encoder connector Mating cycles: <1500 Contacts: 8 Degree of protection per EN 60529: IP30 when connected
EN 60529 protection	IP66/67 when connected

Electrical characteristics

Test voltage
Wire/Wire	3 kV
Wire/Shield	3 kV
Conductor resistance
Power lines	≤26 Ω/km
Supply lines	≤53 Ω/km
Signal lines	≤87.7 Ω/km
Insulation resistance	≥500 MΩ*km
Max. current load in accordance with IEC 60364-5-523 by installation type
Wall mounting	13 A
Installed in conduit or cable duct	11.5 A
Installed in cable tray	13.5 A

Environmental conditions

Temperature
Moving	-40°C to +90°C
Static	-40°C to +90°C

Mechanical characteristics

Dimensions
Length	15 m
Diameter	10.70 mm ±0.25 mm
Flex radius
Single bend	>32.1 mm
Moving	≥80.25 mm
Drag chain data
Acceleration	Max. 50 m/s² (depends on the length of the travel path)
Flex cycles	≤3,000,000
Speed	Max. 300 m/min
Weight	2.625 kg

Numero materiale:

8ECH0015.1A21C-0

Descrizione:

ACOPOS P3 hybrid motor cable EnDat 3, length 15 m, 4x 0.75 mm² + 2x 0.34 mm² + 2x 24 AWG, series 915 8-pin female motor connector, Mini I/O 8-pin male connector, can be used in cable drag chains