DWL@DWL10000829574
| Versione | Lingua | Sistema operativo | Data | Taglia | Tipologia | Download |
|---|---|---|---|---|---|---|
| 1.02 | * | 15/10/2025 | 5 MB | ZIP | UPG_xPC3200_MTCX_V0102_EFI.zip | |
| Descrizione |
xPC3200 Firmware Upgrade (MTCX and SDL4T) ---------------------------------------------------------------- ATTENTION! Possible upgrade problems and version dependency ---------------------------------------------------------------- 1. Do not reset or switch off the device during the upgrade process !!! 2. If a UPS is connected to the system, the battery unit must be disconnected or the Power button must be pressed (to set the system in standby mode) after the upgrade is done, but before the required Power Off/On is done. Otherwise the firmware upgrade is not complete, because the UPS will provide the system with power. 3. A Extended upgrade for the SDL4T Firmware is only necessary if an SDL4T firmware less than V01.00 is installed. 4. Starting with SDL4T Firmware V01.00, a downgrade to a version smaller then V01.00 is not possible. 5. Starting with SDL4T Firmware V01.00, a Automation Panel Firmware update for the SDL4R Firmware at least from V06.14 and HDBT Firmware at least from V01.00 is necessary. ---------------------------------------------------------------- Version 01.02 / 09/29/2025 / MIK !MANDATORY UPDATE! ---------------------------------------------------------------- Content LIESMICH.txt 01.02 NEW README.txt 01.02 NEW STARTUP.nsh 01.00 MTCXxPC3200.nsh 01.00 SDL4TxPC3200.nsh 01.00 MTCXSVC.efi 22.02 11411_0.fw 01.02 NEW 11412_0.fw 01.02 NEW 11413_0.fw 01.02 NEW 11414_0.fw 01.02 NEW 11415_0.fw 01.02 NEW 11426_0.fw 01.02 NEW 11427_0.fw 01.02 NEW 11428_0.fw 01.02 NEW 60620_0.fp (SDL4T) 01.04 60620i0.fp (SDL4TExt.) 01.04 Change(s) 61320_0.fw, 61321_0.fw, 61322_0.fw, 61333_0.fw, 61334_0.fw, 61335_0.fw, 61336_0.fw, 61337_0.fw (MTCX Firmware): - Bugfix: a special custom panel did not work in combination with a PPC3200. ATTENTION! Possible upgrade problems and version dependency, see above. |
|||||
| Versione | Lingua | Sistema operativo | Data | Taglia | Tipologia | Download |
| 1.01 | * | 26/08/2025 | 5 MB | ZIP | UPG_xPC3200_MTCX_V0101_EFI.zip | |
| Descrizione |
xPC3200 Firmware Upgrade (MTCX and SDL4T) ---------------------------------------------------------------- ATTENTION! Possible upgrade problems and version dependency ---------------------------------------------------------------- 1. Do not reset or switch off the device during the upgrade process !!! 2. If a UPS is connected to the system, the battery unit must be disconnected or the Power button must be pressed (to set the system in standby mode) after the upgrade is done, but before the required Power Off/On is done. Otherwise the firmware upgrade is not complete, because the UPS will provide the system with power. 3. A Extended upgrade for the SDL4T Firmware is only necessary if an SDL4T firmware less than V01.00 is installed. 4. Starting with SDL4T Firmware V01.00, a downgrade to a version smaller then V01.00 is not possible. 5. Starting with SDL4T Firmware V01.00, a Automation Panel Firmware update for the SDL4R Firmware at least from V06.14 and HDBT Firmware at least from V01.00 is necessary. ---------------------------------------------------------------- Version 01.01 / 02/07/2025 / MIK !MANDATORY UPDATE! ---------------------------------------------------------------- Content LIESMICH.txt 01.01 NEW README.txt 01.01 NEW STARTUP.nsh 01.00 MTCXxPC3200.nsh 01.00 SDL4TxPC3200.nsh 01.00 MTCXSVC.efi 22.02 11411_0.fw 01.01 NEW 11412_0.fw 01.01 NEW 11413_0.fw 01.01 NEW 11414_0.fw 01.01 NEW 11415_0.fw 01.01 NEW 11426_0.fw 01.01 NEW 11427_0.fw 01.01 NEW 11428_0.fw 01.01 NEW 60620_0.fp (SDL4T) 01.04 60620i0.fp (SDL4TExt.) 01.04 Change(s) 61320_0.fw, 61321_0.fw, 61322_0.fw, 61333_0.fw, 61334_0.fw, 61335_0.fw, 61336_0.fw, 61337_0.fw (MTCX Firmware): - Bugfix: when using PLK IF cards in the SL2 and CAN IF cards in the SL1, the PLK did not work. ATTENTION! Possible upgrade problems and version dependency, see above. |
|||||
