DWL@DWL10000878339
| Version | Sprog | Operativ system | Dato | Størrelse | Type | Download |
|---|---|---|---|---|---|---|
| 2.4.2.1 | * | 07/10/2026 | 2 MB | EXE | AS6_HW_X20SM1426.exe | |
| Beskrivelse |
V6.0 HW Upgrade (X20SM1426) Revision information X20SM1426 Version 2.4.2.1: ID: Firmware signature enables automatic verification of the authenticity on the target system The firmware package contains a digital signature that is automatically validated by Automation Runtime versions, which are supporting this feature. Thisensures that the installed firmware is unchanged and comes from a trusted source. Channel description changed: no Configuration description changed: yes Firmware changed: no Version 2.4.0.0: ID: Adaptations for Automation Studio 4.11 Channel description changed: no Configuration description changed: yes Firmware changed: no Version 2.3.0.0: ID: 716180 support for HW-variant 4 Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\9857_1.fw(200), 1\9857_2.fw(200), 1\9857_3.fw(200), 1\9857_4.fw(100) Version 2.2.1.0: ID: 698495 Function model names adapted Uniform function model names for all stepper modules Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 1\9857_1.fw(200), 1\9857_2.fw(200), 1\9857_3.fw(200) Version 2.2.0.0: ID: 669450 Support for mappMotion Channel description changed: No Configuration description changed: Yes Firmwarechanged: No ID: 672135 Module documentation revised Data sheet V1.51 Channel description changed: No Configuration descriptionchanged: No Firmware changed: No Firmware: 1\9857_1.fw(200), 1\9857_2.fw(200), 1\9857_3.fw(200) Version 1.6.0.0: ID: Adaptations for Automation Studio 4.8 Channel description changed: no Configuration description changed: yes Firmware changed: no Version 1.5.2.0: ID: 528755 Corrections made in the hwc file Channel description changed: Yes Configuration description changed: Yes Firmware changed: No ID: 649320 Module documentation revised Datasheet V1.50 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\9857_1.fw(200), 1\9857_2.fw(200), 1\9857_3.fw(200) Version 1.5.1.1: ID: 474745 Motion Wizzard revised In AS 4.x, the aged library "AsString" won’t beadded to a AS project anymore. The "AsBrStr" will be used by the Motion instead. Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 1\9857_1.fw(200), 1\9857_2.fw(200), 1\9857_3.fw(200) Version 1.5.1.0: ID: 472550 Moduledocumentation revised Data sheet V1.31 Channel description changed:No Configuration description changed: No Firmware changed: No Firmware: 1\9857_1.fw(200), 1\9857_2.fw(200), 1\9857_3.fw(200) Version 1.5.0.0: ID: 455005 Minimum speed for stall detection is now configurable Channel description changed: Yes Configuration descriptionchanged: Yes Firmware changed: Yes ID: 458680 Module documentation revised Datasheet V1.30 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\9857_1.fw(200), 1\9857_2.fw(200), 1\9857_3.fw(200) Version 1.4.1.2: ID: 334270 The module cannot recognize an open wire condition EncOk01 is always true(directly connected to the module ok) Channel description changed: No Configuration description changed: No Firmware changed: No ID: 341060 documentation corrected Channel description changed: No Configuration description changed: No Firmwarechanged: No ID: 349455 documentation corrected Channel description changed: No Configuration description changed: No Firmware changed: No ID: 406955 Corrected a problem in HWX file Channel description changed: No Configuration description changed: No Firmware changed: No ID: 406985 Corrected HWC entry Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\9857_1.fw(14), 1\9857_2.fw(14), 1\9857_3.fw(14) Version 1.4.1.1: ID: 387595 Corrected grouping of configuration parameters Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 1\9857_1.fw(14), 1\9857_2.fw(14), 1\9857_3.fw(14) Version 1.4.1.0: ID: 374685 Fixed a bug in the encoder emulation Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 380425 Cycle time of MPGen edjustable Channel description changed: No Configuration description changed: Yes Firmware changed: Yes ID: 380430 Function model Ramp: new mode Mode -120: Set home position Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\9857_1.fw(14), 1\9857_2.fw(14), 1\9857_3.fw(14) Version 1.3.4.0: ID: 340970 Acyclic read access to the registers for holding/rated/maximum current. Channel description changed: Yes Configuration description changed: No Firmware changed: Yes Firmware: 1\9857_1.fw(12), 1\9857_2.fw(12), 1\9857_3.fw(12) Version 1.3.2.0: ID: 322190 Extension of EPLANdata Channel description changed: Yes Configuration description changed: No Firmware changed: No ID: 326385 Wrong description corrected Channel description changed: Yes Configuration descriptionchanged: No Firmware changed: No Firmware: 1\9857_1.fw(11), 1\9857_2.fw(11), 1\9857_3.fw(11) Version 1.3.1.1: ID: 287200 Support HW 3 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\9857_1.fw(11), 1\9857_2.fw(11), 1\9857_3.fw(11) Version 1.3.1.0: ID: 272500 Module in undefined state, if no trigger happens in mode -121 (Remaining distance mode) Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 272510 Stall error after module startup Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 272515 Ramp mode: Wrong configuratin for referencing speed is possible Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 272520 The X20SM1426 doesn't switch in switched on with a customer motor at ramp mode Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\9857_1.fw(11), 1\9857_2.fw(11) Version 1.2.0.2: ID: 245855 Customer-specific expansion of hardware description file This upgrade has no impact on the Automation Studio and the standard version of the FieldbusDESIGNER Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\9857_1.fw(9), 1\9857_2.fw(9) Version 1.2.0.1: ID: 243210 Customer-specific expansion of hardware description file This upgrade has no impact on the Automation Studio and the standard version of the FieldbusDESIGNER Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\9857_1.fw(9), 1\9857_2.fw(9) Version 1.1.0.0: ID: 201710 ABR-Counter can be displayed parallel to step-counter in I/O mapping Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\9857_1.fw(7), 1\9857_2.fw(7) Version 1.0.0.1: ID: 160485 Current limt was changed at module X20SM1426 Channel description changed: No Configuration description changed: No Firmware changed: No Version 1.0.0.0: ID: 159825 Support X20SM1426 Channel description changed: No Configuration description changed: No Firmware changed: No |
|||||
