8B0C0320HC00.000-1

General information

Certifications
CE	Yes
UKCA	Yes
CRA (Cyber Resilience Act)	In preparation
UL	cULus E225616 Power conversion equipment
KC	Yes
Cooling and mounting type	Cold plate or pass-through mounting

DC bus connection

Voltage
Nominal	750 VDC
Operating range in continuous operation	260 to 800 VDC
Full continuous power	315 to 800 VDC
Continuous power consumption	Max. 880 W
Power dissipation with continuous power	22 W (0% continuous power) 35 W (50% continuous power) 80 W (100% continuous power)
DC bus capacitance	220 nF
Variant	ACOPOSmulti backplane

24 VDC output

Output voltage
DC bus voltage (U_DC): 260 to 315 VDC	25 VDC * (U_DC / 315)
DC bus voltage (U_DC): 315 to 800 VDC	24 VDC ±6%
Reduction of continuous power depending on installation elevation
Starting at 500 m above sea level	80 W per 1000 m
Continuous power	800 W
Continuous current	32 ADC
Reduction of continuous power at ambient temperatures starting at 40°C	No reduction
Reduction of continuous power depending on cooling method	No reduction
Startup delay	Max. 1 s
Startup time	Approx. 5 to 20 ms
Residual ripple	Typ. 50 mV_SS

24 VDC internal system power supply

Peak current (<4 s)
DC bus voltage (U_DC): 350 to 800 VDC	42 ADC
Protective measures
No-load proof	Yes
Overload-proof	Yes
Short-circuit proof	Yes
Feedback protection	Max. 26 VDC (also when the power is switched off)
Overtemperature protection	Yes
Dielectric strength to ground	±50 VDC
Output/Input isolation	SELV / PELV requirements
Output voltage	25 VDC ±1.6%
Variant	ACOPOSmulti backplane

Operating conditions

Permissible mounting orientations
Hanging vertically	Yes
Horizontal, face up	Yes
Standing horizontally	No
Installation elevation above sea level
Nominal	0 to 500 m
Maximum	4000 m
Pollution degree per EN 61800-5-1	2 (non-conductive pollution)
Overvoltage category per EN 61800-5-1	III
Degree of protection per EN 60529	IP20

Ambient conditions

Temperature
Operation
Nominal	5 to 40°C
Maximum	55°C
Storage	-25 to 55°C
Transport	-25 to 70°C
Relative humidity
Operation	5 to 85%
Storage	5 to 95%
Transport	Max. 95% at 40°C

Mechanical properties

Dimensions
Depth
Cold plate	212 mm
Pass-through mounting	209 mm
Width	53 mm
Height	317 mm
Weight	Approx. 2.5 kg
Module width	1

物料号:

8B0C0320HC00.000-1

描述:

Extensive protective measures

ACOPOSmulti auxiliary supply module, 32 A, AS, cold plate or pass-through mounting

必备附件

Terminal block sets

8BZ0C032000.000-1A	Screw clamp terminal block set for ACOPOSmulti 8B0C0xx0Hx00.000-1 modules: 1x 8TB2106.2010-00

可选附件

Fan modules

8BXF001.0000-00	ACOPOSmulti fan module, replacement fan for ACOPOSmulti modules (8BxP/8B0C/8BVI/8BVE/8B0K)

Terminal blocks

8TB2106.2010-00	6-pin screw clamp terminal block, 1-row, pitch: 5.08 mm, label 1: Numbered consecutively

E-CAD（电子或EPLAN模板）	版本（日期）	下载
ACOPOSmulti EPLAN P8 from V2.4		EXE / 81 MB 下载登录

M-CAD（机械模板）	版本（日期）	下载
3D file STEP 8B0C0xx0HC00.000-1		ZIP / 82 KB 下载登录

文档	版本（日期）	下载
ACOPOSmulti User´s Manual		PDF / 308 MB 下载登录
Datasheet 8B0C0320HC00.000-1		PDF / 654 KB 下载登录

证书	版本（日期）	下载
ACOPOSmulti KC certificates		ZIP / 3 MB 下载登录
E225616 UL Certificate of Compliance ACOPOSmulti (UL 508C)		PDF / 282 KB 下载登录
E225616 UL Certificate of Compliance ACOPOSmulti (UL 61800-5-1)		PDF / 183 KB 下载登录
EU Declaration Servos ACOPOSmulti		PDF / 963 KB 下载登录
UK Declaration Servos ACOPOSmulti		PDF / 337 KB 下载登录