General information
Cooling and mounting type | Cold plate |
Certifications | |
CE | Yes |
UKCA | Yes |
UL |
cULus E225616 Power conversion equipment |
DC bus connection
24 VDC output
Quantity | 1 |
Output voltage | |
DC bus voltage (UDC): 260 to 315 VDC | 25 VDC * (UDC/315) |
DC bus voltage (UDC): 315 to 800 VDC | 24 VDC ±6% |
Fuse protection | 250 mA (slow-blow) electronic, automatic reset |
Variant | |
24 VDC, COM | Connector |
24 VDC internal system power supply
Input voltage | 25 VDC ±1.6% |
Input capacitance | 47 µF |
Max. power consumption | 7 W + P 24 VDC Out |
Variant | ACOPOSmulti backplane |
58 VDC output
Fieldbus
Type | POWERLINK V2 controlled node (CN) |
Variant | 2x RJ45, shielded, 2-port hub |
Line length | Max. 100 m between 2 stations (segment length) |
Transfer rate | 100 Mbit/s |
Digital inputs
Quantity | 1 |
Modulation compared to ground potential | ±38 VDC |
Circuit | Sink |
Input current at nominal voltage | Typ. 10 mA |
Switching threshold |
LOW: <5 VDC HIGH: >15 VDC |
Input voltage | |
Nominal | 24 VDC |
Maximum | 30 VDC |
Electrical isolation | Yes |
Switching delay | |
Rising edge | 52 ±0.5 µs (digitally filtered) |
Falling edge | 53 ±0.5 µs (digitally filtered) |
Shielding | No |
Max. cable length | 30 m |
Signal loop through
Operating conditions
Ambient conditions
Temperature | |
Operation | |
Nominal | 5 to 40°C |
Maximum | 55°C |
Storage | -25 to 55°C |
Transport | -25 to 70°C |
Relative humidity | |
Operation | 5 to 85% |
Storage | 5 to 95% |
Transport | Max. 95% at 40°C |
Materialnummer:
8B0C0320HC00.B00-1Beskrivning:
ACOPOSmulti auxiliary supply module, 35 A, AS, cold plate or pass-through mounting, 42...58 VOut
Obligatoriska tillbehör
Terminal block sets
8BZ0C032000.0B0-1A | Screw clamp terminal block set for 8B0C0320Hx00.B00-1 ACOPOSmulti modules: 1x 8TB4104.208P-10, 1x 8TB2112.2010-00, 1x 8TB2104.2010-00, 1x 8TBB104.201A-00 |
8BZ0C032000.0B0-1C | Push-in terminal block set for 8B0C0320Hx00.B00-1 ACOPOSmulti modules: 1x 8TB4104.228P-10, 1x 8TB2112.2210-00, 1x 8TB2104.2210-00, 1x 8TBB104.221A-00 |
Valfria tillbehör
Fan modules
8BXF001.0000-00 | ACOPOSmulti fan module, replacement fan for ACOPOSmulti modules (8BxP/8B0C/8BVI/8BVE/8B0K) |
POWERLINK/Ethernet cables
X20CA0E61.00020 | POWERLINK/Ethernet connection cable, RJ45 to RJ45, 0.2 m |
X20CA0E61.00050 | POWERLINK/Ethernet connection cable, RJ45 to RJ45, 0.5 m |
X20CA0E61.00100 | POWERLINK/Ethernet connection cable, RJ45 to RJ45, 1 m |
X20CA0E61.00500 | POWERLINK/Ethernet connection cable, RJ45 to RJ45, 5 m |
X20CA0E61.01000 | POWERLINK/Ethernet connection cable, RJ45 to RJ45, 10 m |
X20CA0E61.1000 | POWERLINK/Ethernet connection cable, RJ45 to RJ45, 100 m |
Shield component sets
8SCS000.0000-00 | ACOPOSmulti shield component set: 1x shield plate 1x type 0, 1x hose clamp, B 9 mm, D 12-22 mm |
8SCS002.0000-00 | ACOPOSmulti shield component set: 1x clamping plate, 2x clamp D 4-13.5 mm, 2x screws |
8SCS009.0000-00 | ACOPOSmulti shield component set: 1x ACOPOSmulti holding plate SK8-14, 1x shield connection clamp SK14 |
8SCS010.0000-00 | ACOPOSmulti shield component set: 1x ACOPOSmulti holding plate SK14-20, 1x shield connection clamp SK20 |
Terminal blocks
8TB2104.2010-00 | 4-pin screw clamp terminal block, 1-row, pitch: 5.08 mm, label 1: Numbered consecutively |
8TB2104.2210-00 | 4-pin push-in terminal block, 1-row, pitch: 5.08 mm, label 1: Numbered consecutively |
8TB2112.2010-00 | 12-pin screw clamp terminal block, 1-row, pitch: 5.08 mm, label 1: Numbered consecutively |
Automation Studio HW uppdateringar | Version (datum) | Ladda ner |
---|---|---|
V4.6 HW Upgrade (8B0C0320HC00.B00-1) | EXE / 605 KB |
Certifikat | Version (datum) | Ladda ner |
---|---|---|
E225616 UL Certificate of Compliance ACOPOSmulti (UL 61800-5-1) | PDF / 183 KB | |
EU Declaration Servos ACOPOSmulti | PDF / 219 KB | |
UK Declaration Servos ACOPOSmulti | PDF / 109 KB |
Dokumentation | Version (datum) | Ladda ner |
---|---|---|
ACOPOSmulti User´s Manual | PDF / 302 MB | |
ACOPOStrak User´s manual | PDF / 68 MB | |
Data sheet 8B0C0320HC00.B00-1 | PDF / 2 MB |
E-CAD (Electro eller EPLAN mallar) | Version (datum) | Ladda ner |
---|---|---|
ACOPOSmulti EPLAN P8 from V2.4 | EXE / 81 MB |
M-CAD (Mechan. mallar) | Version (datum) | Ladda ner |
---|---|---|
3D file STEP 8B0C0320HC00.B00-1 | ZIP / 396 KB |